From owner-sgroup Wed Nov 1 12:22:16 2000 Received: by hugin.uunet.ca id <193680-26905>; Wed, 1 Nov 2000 12:22:08 -0500 Received: from mail.rolandus.com ([12.9.146.130]) by hugin.uunet.ca with ESMTP id <193673-26905>; Wed, 1 Nov 2000 12:22:05 -0500 Subject: sgroup Atari SC-1435 monitor for sale To: sgroup@lists.uunet.ca X-Mailer: Lotus Notes Release 5.0.2a November 23, 1999 Message-ID: From: "Jim Norman/RolandUS" Date: Wed, 1 Nov 2000 12:22:58 -0500 X-MIMETrack: Serialize by Router on NOTES1/RolandUS(Release 5.0.4 |June 8, 2000) at 11/01/2000 09:22:42 AM MIME-Version: 1.0 Content-type: text/plain; charset=us-ascii Sender: owner-sgroup@lists.uunet.ca Precedence: bulk I have an Atari SC-1435 14" Color monitor for sale that is perfect for Roland Samplers (S-50, S-550, S-770, S-750 and S-760.) It's only sat in my studio for the past 4 years and is in excellent condition. The monitor for viewing Roland samplers. Originally over $400. Will sell for $200/OBO, not including shipping. Jim - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Wed Nov 1 14:25:59 2000 Received: by hugin.uunet.ca id <193680-26904>; Wed, 1 Nov 2000 14:25:52 -0500 Received: from granger.mail.mindspring.net ([207.69.200.148]) by hugin.uunet.ca with ESMTP id <193673-26904>; Wed, 1 Nov 2000 14:25:46 -0500 Received: from smui00.slb.mindspring.net (smui00.slb.mindspring.net [199.174.114.20]) by granger.mail.mindspring.net (8.9.3/8.8.5) with ESMTP id OAA02817 for ; Wed, 1 Nov 2000 14:25:44 -0500 (EST) From: jsegovia@mindspring.com Received: by smui00.slb.mindspring.net id OAA0000004749; Wed, 1 Nov 2000 14:25:17 -0500 (EST) Date: Wed, 1 Nov 2000 14:25:16 -0500 To: sgroup@lists.uunet.ca Subject: Re: sgroup Atari SC-1435 monitor for sale Message-ID: X-Originating-IP: 207.121.232.66 Sender: owner-sgroup@lists.uunet.ca Precedence: bulk I still have an old Samsung CGA monitor I bought with my S-550. 'Still going strong. Say, do you really work for Roland? What department are you with? Do you have much to do with samplers? Jesse Jim Norman/RolandUS wrote: > I have an Atari SC-1435 14" Color monitor for sale that is perfect for > Roland Samplers (S-50, S-550, S-770, S-750 and S-760.) - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Thu Nov 2 10:12:39 2000 Received: by hugin.uunet.ca id <193674-1903>; Thu, 2 Nov 2000 10:12:32 -0500 Received: from babylon.experts-md (aputeaux-101-2-1-246.abo.wanadoo.fr [193.251.40.246]) by hugin.uunet.ca with SMTP id <193673-1903>; Thu, 2 Nov 2000 10:12:26 -0500 Received: (qmail 71647 invoked from network); 2 Nov 2000 15:09:21 -0000 Received: from floydexperts-md.experts-md (HELO mouli.net) (pjgrizel@10.0.0.11) by babylon.experts-md with SMTP; 2 Nov 2000 15:09:21 -0000 Message-ID: <3A018499.95D18F11@mouli.net> Date: Thu, 2 Nov 2000 10:13:29 -0500 From: Pierre-Julien Grizel X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0smp i686) X-Accept-Language: fr, en MIME-Version: 1.0 To: sgroup@lists.uunet.ca Subject: sgroup S550 standard diskettes & EGA screen Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hi, I just bought a second-hand Roland S550 sampler and, as I'm a newbie to sampling, I just thought it'd be possible to use it right straight-off-the-box. Well, after having seen the pretty LEDs flashing, (and a little bit of RTFM) I understood I'd need the disks the dealer didn't give me... So I spent my night making sdisk work. And it works - I can boot my sampler. But the manual mentions three system disks with standard tones on it, and I found only two disks on the different websites I harvested. I should have had System1, System2 & Utilities, and I've got only one System disk (which works perfectly but has no tones in it) and the Utility disk. Anyone knows how to find the actual standard disk images (for sdisk) ?... Other question : I'd like to use a standard screen with my sampler. Is it possible to use an EGA screen - knowing I haven't got the right cable to do so ?... Is the DIN-DB9 cable still available somewhere ?... Many thanks, P.-J. -- If the only tool you have is a hammer, you tend to see every problem as a nail. Si le seul outil dont vous disposez est un marteau, vous avez tendance à voir chaque problème comme un clou. --Abraham Maslow - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Thu Nov 2 10:19:14 2000 Received: by hugin.uunet.ca id <193674-1904>; Thu, 2 Nov 2000 10:19:07 -0500 Received: from mars.kapsch.co.at ([148.198.8.2]) by hugin.uunet.ca with ESMTP id <193673-1904>; Thu, 2 Nov 2000 10:18:57 -0500 Received: from dumbo.kapsch.co.at (148.198.9.36) by mars.kapsch.co.at (MX V5.1-AX An9h) with ESMTP; Thu, 2 Nov 2000 16:18:39 +0100 Received: by dumbo.kapsch.co.at with Internet Mail Service (5.5.2650.21) id ; Thu, 2 Nov 2000 16:18:40 +0100 Message-ID: <0931E18C3147D411A0B900A0C9CC39D69274E2@hati.kapsch.co.at> From: Ullrich Peter To: 'Pierre-Julien Grizel' , sgroup@lists.uunet.ca Subject: AW: sgroup S550 standard diskettes & EGA screen Date: Thu, 2 Nov 2000 10:18:38 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hallo! >Anyone knows how to find the actual standard disk images (for sdisk)?... Beside other addresses heres is a mirror: http://sunsite.univie.ac.at/pub/sound/roland-sgroup/ >'d like to use a standard screen with my sampler. Is it possible to use >an EGA screen - knowing I haven't got the right cable to do so ?... Is >the DIN-DB9 cable still available somewhere ?... I don't know if an EGA monitor will do the job, but a CGA-Monitor or every standard TV with video input (SCART or cinch) will do the job. I think you have to make the cable by yourself. The pinning of the video connector is in the manual! For black/white monitors you can use the monochrome video-input. Another way to get the video signal to a screen is to use a capture card on a PC. Simply plug the video out to the video in of your capture or TV-card in a PC. This feature is nice when you have a sequencer running on a PC and the Sampler output in another window... Ciao Peter \|/ (o o) --oOOO--(_)--OOOo------------------------------------------------------ Ing. Peter Ullrich mailto:ullrich@kapsch.net Homepage: http://come.to/ullrich or the full link http://www.geocities.com/SiliconValley/Heights/3586/ Hardware & Software Developer / Electronic Musician .oooO KAPSCH AG / ECCN Vienna / Austria ( ) Oooo. Traffic Control and Transmission Technology ----\ (----( )------------------------------------------------------- \_) ) / (_/ - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Thu Nov 2 18:54:29 2000 Received: by hugin.uunet.ca id <193674-1903>; Thu, 2 Nov 2000 18:54:22 -0500 Received: from smtp03.mail.onemain.com (smtp-out003.onemain.com [63.208.208.73]) by hugin.uunet.ca with SMTP id <193673-1903>; Thu, 2 Nov 2000 18:54:15 -0500 Received: (qmail 28843 invoked from network); 2 Nov 2000 23:02:38 -0000 Received: from 209-239-212-79.lax.jps.net (HELO ZVSServer) ([209.239.212.79]) (envelope-sender ) by 10.209.20.33 (qmail-ldap-1.03) with SMTP for ; 2 Nov 2000 23:02:38 -0000 From: "James Thomas" To: Subject: RE: sgroup S550 standard diskettes & EGA screen Date: Thu, 2 Nov 2000 18:04:52 -0500 Message-ID: <000d01c04521$4f98dfb0$0100a8c0@ZVSServer> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.00.3018.1300 In-Reply-To: <0931E18C3147D411A0B900A0C9CC39D69274E2@hati.kapsch.co.at> Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Anyone know if a PC-jr. monitor will work for this, or as a regular NTSC screen? Someone gave me one a while back with the plug end cut off, and I'm trying to decide whether to throw it out or not. (BTW I don't have a sampler that with a monitor out anymore, but if that monitor would be useful to anyone please feel free to drop me a line.) -----Original Message----- >'d like to use a standard screen with my sampler. Is it possible to use >an EGA screen - knowing I haven't got the right cable to do so ?... Is >the DIN-DB9 cable still available somewhere ?... - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Sun Nov 5 18:33:21 2000 Received: by hugin.uunet.ca id <193677-11062>; Sun, 5 Nov 2000 18:33:12 -0500 Received: from tsmtp4.mail.isp ([195.235.113.151]) by hugin.uunet.ca with ESMTP id <193674-11063>; Sun, 5 Nov 2000 18:33:10 -0500 Received: from ||Zahir|| ([213.96.195.131]) by tsmtp4.mail.isp (Netscape Messaging Server 4.15) with SMTP id G3KS0O00.GPI for ; Mon, 6 Nov 2000 00:31:36 +0100 Message-Id: <3.0.3.32.20001106000843.012f1dd8@pop3.distrito.com> X-Sender: drexx@pop3.distrito.com X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.3 (32) Date: Sun, 5 Nov 2000 18:08:43 -0500 To: sgroup@lists.uunet.ca From: DrExX++ Subject: sgroup S550 standard diskettes & EGA screen Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hi, I just bought a second-hand Roland S550 sampler and, as I'm a newbie to sampling, I just thought it'd be possible to use it right straight-off-the-box. Well, after having seen the pretty LEDs flashing, (and a little bit of RTFM) I understood I'd need the disks the dealer didn't give me... So I spent my night making sdisk work. And it works - I can boot my sampler. But the manual mentions three system disks with standard tones on it, and I found only two disks on the different websites I harvested. I should have had System1, System2 & Utilities, and I've got only one System disk (which works perfectly but has no tones in it) and the Utility disk. Anyone knows how to find the actual standard disk images (for sdisk) ?... Other question : I'd like to use a standard screen with my sampler. Is it possible to use an EGA screen - knowing I haven't got the right cable to do so ?... Is the DIN-DB9 cable still available somewhere ?... Many thanks, P.-J. --=20 If the only tool you have is a hammer,=20 you tend to see every problem as a nail. Si le seul outil dont vous disposez est un marteau,=20 vous avez tendance =E0 voir chaque probl=E8me comme un clou.=20 --Abraham Maslow - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. //------------------------------------------------------------------------- // guevara@ayto-murcia.es ) // ( // ^ |\_________________,_ ) // | | | =3D=3D=3D=3D= _______)__) // @#####@ __/___ =3D=3D=3D=3D_/ // (### ###)-. MALOS TIEMPOS (O____)\\_(_/ // .(### ###) \ PARA LA (O_ ____) // / (### ###) ) EMPATIA (O____) // (=3D- .@#####@|_--" =20 // /\ \_|l|_/ (\ ___________________ // (=3D-\ |l| / | _______________ | // \ \.___|l|___/ | |XXXXXXXXXXXXX| | // /\ |_| / | |X FEAR OF X| | // (=3D-\._________/\ | |X MICRO$OFT X| | // \ / | |XX PLANET XXX| | // \._________/ | |XXXXXXXXXXXXX| | // # ---- # |_________________| // # __ # _[_______]_ // \########/ ___[___________]___ // | [_____] []|__ // | [_____] []| \__ // L___________________J \ // ___________________ /\ // /###################\ (__) - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Sun Nov 5 18:33:32 2000 Received: by hugin.uunet.ca id <193677-11063>; Sun, 5 Nov 2000 18:33:25 -0500 Received: from tsmtp4.mail.isp ([195.235.113.151]) by hugin.uunet.ca with ESMTP id <193673-11062>; Sun, 5 Nov 2000 18:33:08 -0500 Received: from ||Zahir|| ([213.96.195.131]) by tsmtp4.mail.isp (Netscape Messaging Server 4.15) with SMTP id G3KS0P06.VNY; Mon, 6 Nov 2000 00:31:37 +0100 Message-Id: <3.0.3.32.20001106000843.012f1dd8@pop3.distrito.com> X-Sender: drexx@pop3.distrito.com X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.3 (32) Date: Sun, 5 Nov 2000 18:08:43 -0500 To: 'Pierre-Julien Grizel' , sgroup@lists.uunet.ca From: DrExX++ Subject: AW: sgroup S550 standard diskettes & EGA screen Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hallo! >Anyone knows how to find the actual standard disk images (for sdisk)?... Beside other addresses heres is a mirror: http://sunsite.univie.ac.at/pub/sound/roland-sgroup/ >'d like to use a standard screen with my sampler. Is it possible to use >an EGA screen - knowing I haven't got the right cable to do so ?... Is >the DIN-DB9 cable still available somewhere ?... I don't know if an EGA monitor will do the job, but a CGA-Monitor or every standard TV with video input (SCART or cinch) will do the job. I think you have to make the cable by yourself. The pinning of the video connector is in the manual! For black/white monitors you can use the monochrome video-input. Another way to get the video signal to a screen is to use a capture card on a PC. Simply plug the video out to the video in of your capture or TV-card in a PC. This feature is nice when you have a sequencer running on a PC and the Sampler output in another window... Ciao Peter \|/ (o o) --oOOO--(_)--OOOo------------------------------------------------------ Ing. Peter Ullrich mailto:ullrich@kapsch.net Homepage: http://come.to/ullrich or the full link http://www.geocities.com/SiliconValley/Heights/3586/ Hardware & Software Developer / Electronic Musician .oooO KAPSCH AG / ECCN Vienna / Austria ( ) Oooo. Traffic Control and Transmission Technology ----\ (----( )------------------------------------------------------- \_) ) / (_/ - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. //------------------------------------------------------------------------- // guevara@ayto-murcia.es ) // ( // ^ |\_________________,_ ) // | | | ==== _______)__) // @#####@ __/___ ====_/ // (### ###)-. MALOS TIEMPOS (O____)\\_(_/ // .(### ###) \ PARA LA (O_ ____) // / (### ###) ) EMPATIA (O____) // (=- .@#####@|_--" // /\ \_|l|_/ (\ ___________________ // (=-\ |l| / | _______________ | // \ \.___|l|___/ | |XXXXXXXXXXXXX| | // /\ |_| / | |X FEAR OF X| | // (=-\._________/\ | |X MICRO$OFT X| | // \ / | |XX PLANET XXX| | // \._________/ | |XXXXXXXXXXXXX| | // # ---- # |_________________| // # __ # _[_______]_ // \########/ ___[___________]___ // | [_____] []|__ // | [_____] []| \__ // L___________________J \ // ___________________ /\ // /###################\ (__) - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Sun Nov 5 18:34:14 2000 Received: by hugin.uunet.ca id <193677-11062>; Sun, 5 Nov 2000 18:34:03 -0500 Received: from tsmtp4.mail.isp ([195.235.113.151]) by hugin.uunet.ca with ESMTP id <193673-11062>; Sun, 5 Nov 2000 18:33:55 -0500 Received: from ||Zahir|| ([213.96.195.131]) by tsmtp4.mail.isp (Netscape Messaging Server 4.15) with SMTP id G3KS1704.MO7 for ; Mon, 6 Nov 2000 00:31:55 +0100 Message-Id: <3.0.3.32.20001106000843.012f1dd8@pop3.distrito.com> X-Sender: drexx@pop3.distrito.com X-Mailer: QUALCOMM Windows Eudora Light Version 3.0.3 (32) Date: Sun, 5 Nov 2000 18:08:43 -0500 To: sgroup@lists.uunet.ca From: DrExX++ Subject: RE: sgroup S550 standard diskettes & EGA screen Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Anyone know if a PC-jr. monitor will work for this, or as a regular NTSC screen? Someone gave me one a while back with the plug end cut off, and I'm trying to decide whether to throw it out or not. (BTW I don't have a sampler that with a monitor out anymore, but if that monitor would be useful to anyone please feel free to drop me a line.) -----Original Message----- >'d like to use a standard screen with my sampler. Is it possible to use >an EGA screen - knowing I haven't got the right cable to do so ?... Is >the DIN-DB9 cable still available somewhere ?... - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. //------------------------------------------------------------------------- // guevara@ayto-murcia.es ) // ( // ^ |\_________________,_ ) // | | | ==== _______)__) // @#####@ __/___ ====_/ // (### ###)-. MALOS TIEMPOS (O____)\\_(_/ // .(### ###) \ PARA LA (O_ ____) // / (### ###) ) EMPATIA (O____) // (=- .@#####@|_--" // /\ \_|l|_/ (\ ___________________ // (=-\ |l| / | _______________ | // \ \.___|l|___/ | |XXXXXXXXXXXXX| | // /\ |_| / | |X FEAR OF X| | // (=-\._________/\ | |X MICRO$OFT X| | // \ / | |XX PLANET XXX| | // \._________/ | |XXXXXXXXXXXXX| | // # ---- # |_________________| // # __ # _[_______]_ // \########/ ___[___________]___ // | [_____] []|__ // | [_____] []| \__ // L___________________J \ // ___________________ /\ // /###################\ (__) - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Wed Nov 8 20:18:13 2000 Received: by hugin.uunet.ca id <193674-27443>; Wed, 8 Nov 2000 20:18:06 -0500 Received: from imo-d07.mx.aol.com ([205.188.157.39]) by hugin.uunet.ca with ESMTP id <193673-27443>; Wed, 8 Nov 2000 20:17:56 -0500 Received: from Blacknblux@aol.com by imo-d07.mx.aol.com (mail_out_v28.32.) id 6.2d.343bf28 (4330) for ; Wed, 8 Nov 2000 20:17:38 -0500 (EST) From: Blacknblux@aol.com Message-ID: <2d.343bf28.273b5532@aol.com> Date: Wed, 8 Nov 2000 20:17:38 -0500 Subject: Re: sgroup S550 standard diskettes & EGA screen To: sgroup@lists.uunet.ca MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: Windows AOL sub 124 Sender: owner-sgroup@lists.uunet.ca Precedence: bulk when using a video capture card in conjunction with a s750 sampler.. you would use the monochrome output oui non? right now im using it with a VGA monitor. Does anyone else notice RFI interference in their sampler when using a monitor? - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Fri Nov 10 13:25:41 2000 Received: by hugin.uunet.ca id <193674-6252>; Fri, 10 Nov 2000 13:25:32 -0500 Received: from mercury.Sun.COM (mercury.sun.com [192.9.25.1]) by hugin.uunet.ca with ESMTP id <193673-6252>; Fri, 10 Nov 2000 13:25:18 -0500 Received: from bast.Central.Sun.COM ([129.147.4.36]) by mercury.Sun.COM (8.9.3+Sun/8.9.3) with ESMTP id KAA17800; Fri, 10 Nov 2000 10:25:05 -0800 (PST) Received: from bwn.net (hobo37 [129.147.8.37]) by bast.Central.Sun.COM (8.9.3+Sun/8.9.3/ENSMAIL,v1.7) with ESMTP id LAA17487; Fri, 10 Nov 2000 11:25:02 -0700 (MST) Message-ID: <3A0C3E80.4190BA51@bwn.net> Date: Fri, 10 Nov 2000 13:29:24 -0500 From: Peter Delevoryas X-Mailer: Mozilla 4.72 (Macintosh; I; PPC) X-Accept-Language: en MIME-Version: 1.0 To: sgroup@lists.uunet.ca, pdel@bwn.net Subject: sgroup S-550 stuff for sale on ebay Content-Type: text/plain; charset=us-ascii; x-mac-type="54455854"; x-mac-creator="4D4F5353" Content-Transfer-Encoding: 7bit Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hey guys, I've got some S-550 stuff for sale on ebay: 1 S-550 1 HD5-IF Hard Disk interface for the S-550!!! 1 Sys-553 sequencing software with disks and 'key' 1 STV-II S-550 - to - TV adapter - lets you hook up a TV or monitor through the RGB port on the S-550!! thx pd - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Mon Nov 13 11:25:56 2000 Received: by hugin.uunet.ca id <193674-1255>; Mon, 13 Nov 2000 11:25:48 -0500 Received: from hotmail.com ([64.4.15.164]) by hugin.uunet.ca with ESMTP id <193673-1255>; Mon, 13 Nov 2000 11:25:45 -0500 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 13 Nov 2000 08:23:51 -0800 Received: from 204.171.181.34 by lw10fd.law10.hotmail.msn.com with HTTP; Mon, 13 Nov 2000 16:23:51 GMT X-Originating-IP: [204.171.181.34] From: "David Oleniacz" To: sgroup@lists.uunet.ca Date: Mon, 13 Nov 2000 11:23:51 -0500 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 13 Nov 2000 16:23:51.0457 (UTC) FILETIME=[1BDD8110:01C04D8E] Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Anyone know where you can get a cheap MU-1 mouse or equivalent? I saw in the archives that the S-series sampler mice are MSX compatible but can't find any source on-line. DavidO _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Mon Nov 13 12:16:31 2000 Received: by hugin.uunet.ca id <193674-1256>; Mon, 13 Nov 2000 12:16:23 -0500 Received: from ahmler3.mail.eds.com ([192.85.154.74]) by hugin.uunet.ca with ESMTP id <193673-1256>; Mon, 13 Nov 2000 12:16:12 -0500 Received: from ahmlir1.mail.eds.com (ahmlir1-2.mail.eds.com [192.85.154.25]) by ahmler3.mail.eds.com (8.11.0/8.11.0) with ESMTP id eADHG8l26354 for ; Mon, 13 Nov 2000 12:16:09 -0500 (EST) Received: from ahmlir1.mail.eds.com (localhost [127.0.0.1]) by ahmlir1.mail.eds.com (8.11.0/8.11.0) with ESMTP id eADHG3419076 for ; Mon, 13 Nov 2000 12:16:03 -0500 (EST) Received: from usahm102.exmi01.exch.eds.com (usahm102.exmi01.exch.eds.com [207.37.138.190]) by ahmlir1.mail.eds.com (8.11.0/8.11.0) with ESMTP id eADHG3G19062 for ; Mon, 13 Nov 2000 12:16:03 -0500 (EST) Received: by usahm102.exmi01.exch.eds.com with Internet Mail Service (5.5.2650.21) id ; Mon, 13 Nov 2000 12:16:03 -0500 Message-ID: <1CF4FE310DCDD3119A1F00508BDF0A686FC434@usahm019.exmi01.exch.eds.com> From: "Layzell, Brian A" To: sgroup@lists.uunet.ca Subject: sgroup Value of S-50 Date: Mon, 13 Nov 2000 12:15:55 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="windows-1252" Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hi, Anyone have an idea how much an S-50 is worth? It's in excellent condition (home use only). It has the sequencer program with key, the drawing tablet and lots of sample diskettes (most are Roland's but many are my samples). Also, suggestions on the best way to sell it would be appreciated (online classifieds, eBay, etc.). Thanks, Brian - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Mon Nov 13 12:44:40 2000 Received: by hugin.uunet.ca id <193674-1256>; Mon, 13 Nov 2000 12:44:34 -0500 Received: from gadolinium.btinternet.com ([194.73.73.111]) by hugin.uunet.ca with ESMTP id <193673-1256>; Mon, 13 Nov 2000 12:44:23 -0500 Received: from [62.172.168.39] (helo=shockwavejim) by gadolinium.btinternet.com with smtp (Exim 3.03 #83) id 13vNeM-0003mP-00; Mon, 13 Nov 2000 17:44:10 +0000 From: "Jim Harris" To: "Layzell, Brian A" , Subject: RE: sgroup Value of S-50 Date: Mon, 13 Nov 2000 12:44:02 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Importance: Normal In-Reply-To: <1CF4FE310DCDD3119A1F00508BDF0A686FC434@usahm019.exmi01.exch.eds.com> Sender: owner-sgroup@lists.uunet.ca Precedence: bulk hi brian I can only give you UK prices. I recently bought just the s50 for 100 uk pounds and saw one with a broken key auctioned with a starting bid of 50 uk pounds altho I don't know what it went for. However prices do vary greatly and the two accessories you have don't come up that often. Try 150/175, be happy with 150 ukp? As it goes I would be interested in the sequencing software and tablet. I'd give you 50 ukp for these, which is probably over the odds but I'd like them alot. s50 are interesting instruments. Given that it has a velocity/aftertouch transmitting 61 keyboard with pitch-bend and modulation, for me 100 ukp was good value for these features alone- I have no other controller keyboard. As a sampler it is harder to use than its nearest second-hand rivals the Akai s900 and s950 but has comparable power (to the former at least). These Akai models seem to be holding out around 200-250 ukp. Of the S-series samplers the s7xx models have kept their value the most. Fully featured models fetch prices not far off 1000 ukp. The Roland w30 (which isn't prefixed as an s model but more or less is) has also kept some value, I've seen it recently for anything between 300 and 500 uk pounds! Next up is the s550 which is a rackmount unit and has twice the memory of the s50 and is quite desirable. I've seen these with monitors for 200-250 ukp. The s10, s330 and s220 are really of very limited use thesedays and would be worth maybe 50/75 ukp. jim -----Original Message----- From: owner-sgroup@lists.uunet.ca [mailto:owner-sgroup@lists.uunet.ca]On Behalf Of Layzell, Brian A Sent: Monday, November 13, 2000 5:16 PM To: sgroup@lists.uunet.ca Subject: sgroup Value of S-50 Hi, Anyone have an idea how much an S-50 is worth? It's in excellent condition (home use only). It has the sequencer program with key, the drawing tablet and lots of sample diskettes (most are Roland's but many are my samples). Also, suggestions on the best way to sell it would be appreciated (online classifieds, eBay, etc.). Thanks, Brian - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Mon Nov 13 12:45:45 2000 Received: by hugin.uunet.ca id <193674-1256>; Mon, 13 Nov 2000 12:45:38 -0500 Received: from mail2.lear.com ([63.68.196.36]) by hugin.uunet.ca with SMTP id <193687-1256>; Mon, 13 Nov 2000 12:45:23 -0500 Received: from 10.0.4.95 by mail2.lear.com (InterScan E-Mail VirusWall NT); Mon, 13 Nov 2000 12:44:52 -0500 (Eastern Standard Time) Received: by inet-imc-01.headquarters.lear.com with Internet Mail Service (5.5.2650.21) id ; Mon, 13 Nov 2000 12:44:52 -0500 Message-ID: <70533B83BB16D111852D00805F59F04D55BD0E@oakville.oakville.lear.com> From: "Gallagher, Jon" To: "Layzell, Brian A" , sgroup@lists.uunet.ca Subject: RE: sgroup Value of S-50 Date: Mon, 13 Nov 2000 12:44:45 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain Sender: owner-sgroup@lists.uunet.ca Precedence: bulk I paid $375 Canadian for mine which is worth like, $1.75 Us..(ha ha ha) It came with 15 user diskettes, the manual and a MIDI cable (whoopee.) > -----Original Message----- > From: Layzell, Brian A [SMTP:brian.layzell@eds.com] > Sent: Monday, November 13, 2000 12:16 PM > To: sgroup@lists.uunet.ca > Subject: sgroup Value of S-50 > > Hi, > > Anyone have an idea how much an S-50 is worth? It's in excellent > condition > (home use only). It has the sequencer program with key, the drawing > tablet > and lots of sample diskettes (most are Roland's but many are my samples). > > Also, suggestions on the best way to sell it would be appreciated (online > classifieds, eBay, etc.). > > Thanks, > Brian > > > - > Sent by the sgroup mailing list on lists.uunet.ca > For subscription information, send mail to majordomo@lists.uunet.ca > and see http://www.generalconcepts.com/sgroup/ for more information. - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Mon Nov 13 13:18:59 2000 Received: by hugin.uunet.ca id <193674-1255>; Mon, 13 Nov 2000 13:18:51 -0500 Received: from ahmler2.mail.eds.com ([192.85.154.72]) by hugin.uunet.ca with ESMTP id <193673-1255>; Mon, 13 Nov 2000 13:18:41 -0500 Received: from ahmlir1.mail.eds.com (ahmlir1-2.mail.eds.com [192.85.154.25]) by ahmler2.mail.eds.com (8.11.1/8.11.1) with ESMTP id eADIG6504374 for ; Mon, 13 Nov 2000 13:16:06 -0500 Received: from ahmlir1.mail.eds.com (localhost [127.0.0.1]) by ahmlir1.mail.eds.com (8.11.0/8.11.0) with ESMTP id eADIIVq18470 for ; Mon, 13 Nov 2000 13:18:31 -0500 (EST) Received: from usahm102.exmi01.exch.eds.com (usahm102.exmi01.exch.eds.com [207.37.138.190]) by ahmlir1.mail.eds.com (8.11.0/8.11.0) with ESMTP id eADIITi18378 for ; Mon, 13 Nov 2000 13:18:29 -0500 (EST) Received: by usahm102.exmi01.exch.eds.com with Internet Mail Service (5.5.2650.21) id ; Mon, 13 Nov 2000 13:18:28 -0500 Message-ID: <1CF4FE310DCDD3119A1F00508BDF0A686FC43B@usahm019.exmi01.exch.eds.com> From: "Layzell, Brian A" To: "'sgroup@hugin.uunet.ca'" Subject: RE: sgroup Value of S-50 Date: Mon, 13 Nov 2000 13:18:22 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain; charset="windows-1252" Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Thanks Jon and Jim for the quick feedback. Your purchase prices are in line with what I thought - about $250-300 US. I will probably be purchasing a Yamaha S80 so I don't really need to keep the Roland S-50 as a controller keyboard. However, I do know someone who may want just the keyboard. Jim, if I decide to sell the tablet and sequencer separate, I'll contact you first. Brian -----Original Message----- From: Jim Harris [mailto:shockwavejim@kerb.co.uk] Sent: Monday, November 13, 2000 12:44 PM To: Layzell, Brian A; sgroup@hugin.uunet.ca Subject: RE: sgroup Value of S-50 hi brian I can only give you UK prices. I recently bought just the s50 for 100 uk pounds and saw one with a broken key auctioned with a starting bid of 50 uk pounds altho I don't know what it went for. However prices do vary greatly and the two accessories you have don't come up that often. Try 150/175, be happy with 150 ukp? As it goes I would be interested in the sequencing software and tablet. I'd give you 50 ukp for these, which is probably over the odds but I'd like them alot. s50 are interesting instruments. Given that it has a velocity/aftertouch transmitting 61 keyboard with pitch-bend and modulation, for me 100 ukp was good value for these features alone- I have no other controller keyboard. As a sampler it is harder to use than its nearest second-hand rivals the Akai s900 and s950 but has comparable power (to the former at least). These Akai models seem to be holding out around 200-250 ukp. Of the S-series samplers the s7xx models have kept their value the most. Fully featured models fetch prices not far off 1000 ukp. The Roland w30 (which isn't prefixed as an s model but more or less is) has also kept some value, I've seen it recently for anything between 300 and 500 uk pounds! Next up is the s550 which is a rackmount unit and has twice the memory of the s50 and is quite desirable. I've seen these with monitors for 200-250 ukp. The s10, s330 and s220 are really of very limited use thesedays and would be worth maybe 50/75 ukp. jim - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Mon Nov 13 15:57:38 2000 Received: by hugin.uunet.ca id <193674-1680>; Mon, 13 Nov 2000 15:57:32 -0500 Received: from t21mta02-app.talk21.com (mta02.talk21.com [62.172.192.41]) by hugin.uunet.ca with ESMTP id <193673-21991>; Mon, 13 Nov 2000 15:57:17 -0500 Received: from t21mtavirtual.talk21.com ([10.216.100.7]) by t21mta02-app.talk21.com (InterMail vM.4.01.02.27 201-229-119-110) with SMTP id <20001113205457.FYVY17544.t21mta02-app.talk21.com@t21mtavirtual.talk21.com> for ; Mon, 13 Nov 2000 20:54:57 +0000 Date: Mon, 13 Nov 2000 16:04:37 -0500 To: sgroup@lists.uunet.ca From: bunster1@talk21.com Subject: sgroup CD5 Message-Id: <20001113205457.FYVY17544.t21mta02-app.talk21.com@t21mtavirtual.talk21.com> Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hi all you Rolandites out there. I've just purchased a W-30 and am having great fun trying to find my way around it. I've read in it's manual about the CD-5 and KW-30 and would love to get hold of these. If anyone knows of any for sale anywhere could they please let me know ? ---Open Email - Email on your tv with talk21--- - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Tue Nov 14 11:35:11 2000 Received: by hugin.uunet.ca id <193674-2372>; Tue, 14 Nov 2000 11:35:05 -0500 Received: from babylon.experts-md (aputeaux-101-2-2-6.abo.wanadoo.fr [193.252.47.6]) by hugin.uunet.ca with SMTP id <193673-2372>; Tue, 14 Nov 2000 11:35:01 -0500 Received: (qmail 5807 invoked from network); 14 Nov 2000 16:31:57 -0000 Received: from unknown (HELO mouli.net) (pjgrizel@10.0.0.99) by babylon.experts-md with SMTP; 14 Nov 2000 16:31:57 -0000 Message-ID: <3A1169FF.2BA254DD@mouli.net> Date: Tue, 14 Nov 2000 11:36:15 -0500 From: Pierre-Julien Grizel X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0smp i686) X-Accept-Language: fr, en MIME-Version: 1.0 To: sgroup Subject: sgroup MU-1 mouse Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hi, Someone else already posted this, but that seems an interesting thread and no one answered... There's currently an MU-1 mouse for sale at ebay (http://cgi.fr.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=494008713) that is currently rated $26. But, I'd like to know if there is a way to emulate such a mouse with, say, an old Microsoft Mouse or such device (Mouse Systems ? Logitech ?) Does anyone knows how to do this ? Thanks, P.-J. -- If the only tool you have is a hammer, you tend to see every problem as a nail. Si le seul outil dont vous disposez est un marteau, vous avez tendance à voir chaque problème comme un clou. --Abraham Maslow - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Tue Nov 14 11:36:30 2000 Received: by hugin.uunet.ca id <193687-2372>; Tue, 14 Nov 2000 11:36:22 -0500 Received: from babylon.experts-md (aputeaux-101-2-2-6.abo.wanadoo.fr [193.252.47.6]) by hugin.uunet.ca with SMTP id <193674-2368>; Tue, 14 Nov 2000 11:36:07 -0500 Received: (qmail 5810 invoked from network); 14 Nov 2000 16:33:10 -0000 Received: from unknown (HELO mouli.net) (pjgrizel@10.0.0.99) by babylon.experts-md with SMTP; 14 Nov 2000 16:33:10 -0000 Message-ID: <3A116A47.C62669C1@mouli.net> Date: Tue, 14 Nov 2000 11:37:27 -0500 From: Pierre-Julien Grizel X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0smp i686) X-Accept-Language: fr, en MIME-Version: 1.0 To: sgroup Subject: sgroup SDisk sources Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hi again, Does anyone know if the sdisk.exe program sources are available somewhere ? I'd like to write a free version for Unix, and it seems to be as simple to write as dd if=xxx.out of=/dev/fda, but I need additional details to make it work..... Many thanks, P.-J. -- If the only tool you have is a hammer, you tend to see every problem as a nail. Si le seul outil dont vous disposez est un marteau, vous avez tendance à voir chaque problème comme un clou. --Abraham Maslow - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Tue Nov 14 12:13:28 2000 Received: by hugin.uunet.ca id <193674-2372>; Tue, 14 Nov 2000 12:13:20 -0500 Received: from gadolinium.btinternet.com ([194.73.73.111]) by hugin.uunet.ca with ESMTP id <193673-2372>; Tue, 14 Nov 2000 12:13:14 -0500 Received: from [62.172.168.216] (helo=shockwavejim) by gadolinium.btinternet.com with smtp (Exim 3.03 #83) id 13vjdu-00067m-00 for sgroup@lists.uunet.ca; Tue, 14 Nov 2000 17:13:10 +0000 From: "Jim Harris" To: "sgroup" Subject: RE: sgroup MU-1 mouse Date: Tue, 14 Nov 2000 12:12:52 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook IMO, Build 9.0.2416 (9.0.2910.0) X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Importance: Normal In-Reply-To: <3A1169FF.2BA254DD@mouli.net> Sender: owner-sgroup@lists.uunet.ca Precedence: bulk i've had a good route around the net and asked on a few newsgroups and i'd say the answer is no! apparently the protocol employed by roland mice and others is very different- a conversion therefore is not trivial -hopefully i can be proved wrong but i've never found any clues pierre cheers jim -----Original Message----- From: owner-sgroup@lists.uunet.ca [mailto:owner-sgroup@lists.uunet.ca]On Behalf Of Pierre-Julien Grizel Sent: Tuesday, November 14, 2000 4:36 PM To: sgroup Subject: sgroup MU-1 mouse Hi, Someone else already posted this, but that seems an interesting thread and no one answered... There's currently an MU-1 mouse for sale at ebay (http://cgi.fr.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=494008713) that is currently rated $26. But, I'd like to know if there is a way to emulate such a mouse with, say, an old Microsoft Mouse or such device (Mouse Systems ? Logitech ?) Does anyone knows how to do this ? Thanks, P.-J. -- If the only tool you have is a hammer, you tend to see every problem as a nail. Si le seul outil dont vous disposez est un marteau, vous avez tendance à voir chaque problème comme un clou. --Abraham Maslow - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Tue Nov 14 13:25:27 2000 Received: by hugin.uunet.ca id <193674-2372>; Tue, 14 Nov 2000 13:25:22 -0500 Received: from nova.unix.portal.com ([156.151.32.103]) by hugin.uunet.ca with ESMTP id <193673-2372>; Tue, 14 Nov 2000 13:25:03 -0500 Received: from imp.portal.com (imp.portal.com [156.151.32.82]) by nova.unix.portal.com (8.8.5/8.8.5) with ESMTP id KAA05351; Tue, 14 Nov 2000 10:24:57 -0800 (PST) Received: from sjspc (lg1extra1.dashmail.net [216.36.20.97]) by imp.portal.com (8.8.8+Sun/8.8.8) with ESMTP id KAA10757; Tue, 14 Nov 2000 10:24:56 -0800 (PST) Reply-To: From: "Steve Schow" To: "'Jim Harris'" , "sgroup" Subject: RE: sgroup MU-1 mouse Date: Tue, 14 Nov 2000 13:24:43 -0500 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 8bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) Importance: Normal In-Reply-To: X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-sgroup@lists.uunet.ca Precedence: bulk If I recall correctly, the main difference between a Roland Mouse and say a MS mouse is that the wires are switched around. I'm not positive on that though.... Sellens? If its just a wire switch, then you could potentially buy an MS mouse and futz with the wiring. -steve > -----Original Message----- > From: Jim Harris [mailto:shockwavejim@kerb.co.uk] > Sent: Tuesday, November 14, 2000 9:13 AM > To: sgroup > Subject: RE: sgroup MU-1 mouse > > > i've had a good route around the net and asked on a few > newsgroups and i'd > say the answer is no! apparently the protocol employed by > roland mice and > others is very different- a conversion therefore is not > trivial -hopefully i > can be proved wrong but i've never found any clues pierre > > cheers > jim > > -----Original Message----- > From: owner-sgroup@lists.uunet.ca > [mailto:owner-sgroup@lists.uunet.ca]On > Behalf Of Pierre-Julien Grizel > Sent: Tuesday, November 14, 2000 4:36 PM > To: sgroup > Subject: sgroup MU-1 mouse > > > > > Hi, > > > Someone else already posted this, but that seems an interesting thread > and no one answered... > > > > There's currently an MU-1 mouse for sale at ebay > (http://cgi.fr.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=494008713) > that is currently rated $26. > But, I'd like to know if there is a way to emulate such a mouse with, > say, an old Microsoft Mouse or such device (Mouse Systems ? > Logitech ?) > > > Does anyone knows how to do this ? > > > > Thanks, > > > P.-J. > > > > -- > If the only tool you have is a hammer, > you tend to see every problem as a nail. > Si le seul outil dont vous disposez est un marteau, > vous avez tendance à voir chaque problème comme un clou. > --Abraham Maslow > > - > Sent by the sgroup mailing list on lists.uunet.ca > For subscription information, send mail to majordomo@lists.uunet.ca > and see http://www.generalconcepts.com/sgroup/ for more information. > > > - > Sent by the sgroup mailing list on lists.uunet.ca > For subscription information, send mail to majordomo@lists.uunet.ca > and see http://www.generalconcepts.com/sgroup/ for more information. > - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Tue Nov 14 13:45:52 2000 Received: by hugin.uunet.ca id <193674-2368>; Tue, 14 Nov 2000 13:45:44 -0500 Received: from ops.yyz.gnac.net ([209.250.142.232]) by hugin.uunet.ca with ESMTP id <193673-2368>; Tue, 14 Nov 2000 13:45:34 -0500 Received: by ops.yyz.gnac.net; id KAA16279; Tue, 14 Nov 2000 10:50:00 -0800 (PST) Received: from nodnsquery(192.168.16.165) by firewall.ops.yyz.gnac.net via smap (V5.0) id xma016272; Tue, 14 Nov 00 10:49:32 -0800 Received: (from jsellens@localhost) by gc7.generalconcepts.com (8.11.0/8.11.0) id eAEIiuc02829; Tue, 14 Nov 2000 13:44:56 -0500 (EST) (envelope-from jsellens) Date: Tue, 14 Nov 2000 13:44:56 -0500 From: John Sellens Message-Id: <200011141844.eAEIiuc02829@gc7.generalconcepts.com> To: grizel@mouli.net, sgroup@lists.uunet.ca Subject: Re: sgroup SDisk sources Sender: owner-sgroup@lists.uunet.ca Precedence: bulk | From: Pierre-Julien Grizel | | Does anyone know if the sdisk.exe program sources are available | somewhere ? I'd like to write a free version for Unix, and it seems to | be as simple to write as dd if=xxx.out of=/dev/fda, but I need | additional details to make it work..... It's not sdisk.exe source, but if you look in http://www.generalconcepts.com/sgroup/archive/utilities/source/ you'll find some unix-ish source (from many years ago) which can read (and write?) the disk images. But you're right - dd is typically involved :-) John - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Tue Nov 14 13:48:50 2000 Received: by hugin.uunet.ca id <193674-2372>; Tue, 14 Nov 2000 13:48:42 -0500 Received: from ops.yyz.gnac.net ([209.250.142.232]) by hugin.uunet.ca with ESMTP id <193673-2368>; Tue, 14 Nov 2000 13:48:34 -0500 Received: by ops.yyz.gnac.net; id KAA16295; Tue, 14 Nov 2000 10:53:00 -0800 (PST) Received: from nodnsquery(192.168.16.165) by firewall.ops.yyz.gnac.net via smap (V5.0) id xma016291; Tue, 14 Nov 00 10:52:19 -0800 Received: (from jsellens@localhost) by gc7.generalconcepts.com (8.11.0/8.11.0) id eAEIlow02892; Tue, 14 Nov 2000 13:47:50 -0500 (EST) (envelope-from jsellens) Date: Tue, 14 Nov 2000 13:47:50 -0500 From: John Sellens Message-Id: <200011141847.eAEIlow02892@gc7.generalconcepts.com> To: sgroup@lists.uunet.ca, shockwavejim@kerb.co.uk, sjs@bstage.com Subject: RE: sgroup MU-1 mouse Sender: owner-sgroup@lists.uunet.ca Precedence: bulk All I know about the mice is at http://www.generalconcepts.com/sgroup/archive/information/mice and that ain't much. John | From: "Steve Schow" | Subject: RE: sgroup MU-1 mouse | Date: Tue, 14 Nov 2000 13:24:43 -0500 | | If I recall correctly, the main difference between a Roland Mouse and say a | MS mouse is that the wires are switched around. I'm not positive on that | though.... Sellens? | | If its just a wire switch, then you could potentially buy an MS mouse and | futz with the wiring. | | -steve | | > -----Original Message----- | > From: Jim Harris [mailto:shockwavejim@kerb.co.uk] | > Sent: Tuesday, November 14, 2000 9:13 AM | > To: sgroup | > Subject: RE: sgroup MU-1 mouse | > | > | > i've had a good route around the net and asked on a few | > newsgroups and i'd | > say the answer is no! apparently the protocol employed by | > roland mice and | > others is very different- a conversion therefore is not | > trivial -hopefully i | > can be proved wrong but i've never found any clues pierre | > | > cheers | > jim | > | > -----Original Message----- | > From: owner-sgroup@lists.uunet.ca | > [mailto:owner-sgroup@lists.uunet.ca]On | > Behalf Of Pierre-Julien Grizel | > Sent: Tuesday, November 14, 2000 4:36 PM | > To: sgroup | > Subject: sgroup MU-1 mouse | > | > | > There's currently an MU-1 mouse for sale at ebay | > (http://cgi.fr.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=494008713) | > that is currently rated $26. | > But, I'd like to know if there is a way to emulate such a mouse with, | > say, an old Microsoft Mouse or such device (Mouse Systems ? | > Logitech ?) | > | > | > Does anyone knows how to do this ? - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Tue Nov 14 14:01:34 2000 Received: by hugin.uunet.ca id <193674-2372>; Tue, 14 Nov 2000 14:01:26 -0500 Received: from spdmbaaa.compuserve.com (ds-img-7.compuserve.com [149.174.206.153]) by hugin.uunet.ca with ESMTP id <193673-2372>; Tue, 14 Nov 2000 14:01:23 -0500 Received: (from mailgate@localhost) by spdmbaaa.compuserve.com (8.9.3/8.9.3/SUN-1.9) id OAA06714 for sgroup@hugin.uunet.ca; Tue, 14 Nov 2000 14:01:18 -0500 (EST) Date: Tue, 14 Nov 2000 14:00:26 -0500 From: dennis barton Subject: sgroup MU-1 mouse To: sgroup@lists.uunet.ca Message-ID: <200011141401_MC2-BAD8-F49@compuserve.com> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: inline Sender: owner-sgroup@lists.uunet.ca Precedence: bulk > If I recall correctly, the main difference between a Roland Mouse and say a >MS mouse is that the wires are switched around. I'm not positive on th= at >though.... Sellens? > >If its just a wire switch, then you could potentially buy an MS mouse a= nd >futz with the wiring. There is a PC board with stuff on it in the MU1. |_e_/~ Dennis Barton ) skylab2000 ~\/\ Brainforest Productions, Los Angeles / http://skylab2000.com - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Tue Nov 14 14:14:46 2000 Received: by hugin.uunet.ca id <193674-2368>; Tue, 14 Nov 2000 14:14:38 -0500 Received: from lafontaine.cybercable.fr ([212.198.0.202]) by hugin.uunet.ca with SMTP id <193673-2368>; Tue, 14 Nov 2000 14:14:35 -0500 Received: (qmail 5587587 invoked from network); 14 Nov 2000 19:14:28 -0000 Received: from r185m18.cybercable.tm.fr (HELO zgogor) ([195.132.185.18]) (envelope-sender ) by lafontaine.cybercable.fr (qmail-ldap-1.03) with SMTP for ; 14 Nov 2000 19:14:28 -0000 Message-ID: <005d01c04e6f$290e18e0$12b984c3@cybercable.fr> From: "Yael & Igor" To: References: <200011141401_MC2-BAD8-F49@compuserve.com> Subject: sgroup VS 880 Problem .... Date: Tue, 14 Nov 2000 14:14:48 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2919.6600 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2919.6600 Sender: owner-sgroup@lists.uunet.ca Precedence: bulk hi the List :o) is it possible to copy the entire Volume of a HD from a VS 880 with a MAC ?? by SCSI ?? can i see my HD mounted on my Mac desktop ??? Tx everybody igor - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Thu Nov 16 08:55:26 2000 Received: by hugin.uunet.ca id <193674-10215>; Thu, 16 Nov 2000 08:55:19 -0500 Received: from bird2.de.uu.net ([193.101.111.28]) by hugin.uunet.ca with ESMTP id <193673-10215>; Thu, 16 Nov 2000 08:55:13 -0500 Received: from cityweb.de (pec-120-171.tnt10.me2.uunet.de [149.225.120.171]) by bird2.de.uu.net (5.5.5/5.5.5) with ESMTP id OAA28154 for ; Thu, 16 Nov 2000 14:55:09 +0100 (MET) Message-ID: <3A129DF8.C8557614@cityweb.de> Date: Wed, 15 Nov 2000 09:30:17 -0500 From: Ingo Debus X-Mailer: Mozilla 4.7 (Macintosh; I; PPC) X-Accept-Language: en,de,pdf MIME-Version: 1.0 To: sgroup Subject: Re: sgroup SDisk sources References: <3A116A47.C62669C1@mouli.net> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Pierre-Julien Grizel wrote: > Does anyone know if the sdisk.exe program sources are available > somewhere ? I'd like to write a free version for Unix, and it seems to > be as simple to write as dd if=xxx.out of=/dev/fda, but I need > additional details to make it work..... Don't know about SDISK, but the sources of SAMDISK, a similar program, are included. However this is old K&R C (no ANSI), but I have converted them to ANSI C and added a few features. If anyone wants my version, let me know. Ingo - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Thu Nov 16 09:01:57 2000 Received: by hugin.uunet.ca id <193674-10215>; Thu, 16 Nov 2000 09:01:51 -0500 Received: from babylon.experts-md (aputeaux-101-2-2-6.abo.wanadoo.fr [193.252.47.6]) by hugin.uunet.ca with SMTP id <193673-10215>; Thu, 16 Nov 2000 09:01:36 -0500 Received: (qmail 16662 invoked from network); 16 Nov 2000 13:58:29 -0000 Received: from unknown (HELO mouli.net) (pjgrizel@10.0.0.99) by babylon.experts-md with SMTP; 16 Nov 2000 13:58:29 -0000 Message-ID: <3A13E915.343093CE@mouli.net> Date: Thu, 16 Nov 2000 09:03:01 -0500 From: Pierre-Julien Grizel X-Mailer: Mozilla 4.72 [en] (X11; U; Linux 2.2.14-5.0smp i686) X-Accept-Language: fr, en MIME-Version: 1.0 To: Ingo Debus CC: sgroup Subject: Re: sgroup SDisk sources References: <3A116A47.C62669C1@mouli.net> <3A129DF8.C8557614@cityweb.de> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-sgroup@lists.uunet.ca Precedence: bulk So, yes, if I manage to understand mac-voodoo ! :-)) Many thanks, P.-J. Ingo Debus wrote: > > Pierre-Julien Grizel wrote: > > Does anyone know if the sdisk.exe program sources are available > > somewhere ? I'd like to write a free version for Unix, and it seems to > > be as simple to write as dd if=xxx.out of=/dev/fda, but I need > > additional details to make it work..... > > Don't know about SDISK, but the sources of SAMDISK, a similar program, > are included. However this is old K&R C (no ANSI), but I have converted > them to ANSI C and added a few features. If anyone wants my version, let > me know. > > Ingo > > - > Sent by the sgroup mailing list on lists.uunet.ca > For subscription information, send mail to majordomo@lists.uunet.ca > and see http://www.generalconcepts.com/sgroup/ for more information. -- If the only tool you have is a hammer, you tend to see every problem as a nail. Si le seul outil dont vous disposez est un marteau, vous avez tendance à voir chaque problème comme un clou. --Abraham Maslow - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Fri Nov 17 10:16:21 2000 Received: by hugin.uunet.ca id <193674-29046>; Fri, 17 Nov 2000 10:16:13 -0500 Received: from webshield.gambro.net ([193.15.174.253]) by hugin.uunet.ca with SMTP id <193673-29046>; Fri, 17 Nov 2000 10:16:03 -0500 Received: FROM luhub2.gambro.net BY webshield.gambro.net ; Fri Nov 17 16:15:58 2000 +0100 Received: by luhub2.gambro.net with Internet Mail Service (5.5.2650.21) id ; Fri, 17 Nov 2000 16:15:58 +0100 Message-ID: <3B780877781BD411941B00508BCCE7E00CFD22@MEYEXCH> From: Ismail.Topuz@gambro.com To: sgroup@lists.uunet.ca Subject: sgroup I search the MB89352 chip for my Roland W30 Sampler Date: Fri, 17 Nov 2000 10:15:53 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2650.21) Content-Type: text/plain Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Hi all, I search the MB89352 chip for my Roland W30 Sampler but without success, i call Fujitsu FRANCE they said me that they can't find this old chip , and Sarp FRANCE said me that they never provide this chip. Can anybody know there i can get this MB89352 old chip ? Thanks much for your help ** Confidentiality Statement and Disclaimer ** Proprietary or confidential information belonging to Gambro AB or to one of its affiliated companies may be contained in this message. If you are not the addressee indicated in this message (or responsible for the delivery of the message to such person), please do not copy or deliver this message to anyone. In such case, please destroy this message and notify the sender by reply e-mail. Please advise the sender immediately if you or your employer do not consent to Internet e-mail for messages of this kind. Opinions, conclusions and other information in this message that pertain to the sender's employer and its products and services represent the opinion of the sender and do not necessarily represent or reflect the views and opinions of the employer. ** End of Statement ** - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Fri Nov 17 20:16:52 2000 Received: by hugin.uunet.ca id <193674-29045>; Fri, 17 Nov 2000 20:16:47 -0500 Received: from smtp04.mail.onemain.com (smtp-out003.onemain.com [63.208.208.73]) by hugin.uunet.ca with SMTP id <193673-29046>; Fri, 17 Nov 2000 20:16:33 -0500 Received: (qmail 1005 invoked from network); 18 Nov 2000 01:16:27 -0000 Received: from 209-239-218-105.lax.jps.net (HELO zvsserver) ([209.239.218.105]) (envelope-sender ) by 10.209.20.34 (qmail-ldap-1.03) with SMTP for ; 18 Nov 2000 01:16:27 -0000 From: "James W. Thomas" To: , Subject: RE: sgroup I search the MB89352 chip for my Roland W30 Sampler Date: Fri, 17 Nov 2000 20:16:31 -0500 Message-ID: <000101c050fd$2fda5680$0100a8c0@zvsserver> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook CWS, Build 9.0.2416 (9.0.2911.0) Importance: Normal In-Reply-To: <3B780877781BD411941B00508BCCE7E00CFD22@MEYEXCH> X-MimeOLE: Produced By Microsoft MimeOLE V5.00.3018.1300 Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Here's a place in the US that might be able to help: 1-800-4-NEWARK -----Original Message----- Hi all, I search the MB89352 chip for my Roland W30 Sampler but without success, i call Fujitsu FRANCE they said me that they can't find this old chip , and Sarp FRANCE said me that they never provide this chip. Can anybody know there i can get this MB89352 old chip ? - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Fri Nov 17 21:59:00 2000 Received: by hugin.uunet.ca id <193674-29046>; Fri, 17 Nov 2000 21:58:54 -0500 Received: from sphmgaae.compuserve.com (hs-img-5.compuserve.com [149.174.177.154]) by hugin.uunet.ca with ESMTP id <193673-29045>; Fri, 17 Nov 2000 21:58:52 -0500 Received: (from mailgate@localhost) by sphmgaae.compuserve.com (8.9.3/8.9.3/SUN-1.9) id VAA23176 for sgroup@hugin.uunet.ca; Fri, 17 Nov 2000 21:58:49 -0500 (EST) Date: Fri, 17 Nov 2000 21:58:18 -0500 From: dennis barton Subject: sgroup s760? To: sgroup@lists.uunet.ca Message-ID: <200011172158_MC2-BB58-C4C7@compuserve.com> MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset=ISO-8859-1 Content-Disposition: inline Sender: owner-sgroup@lists.uunet.ca Precedence: bulk Has anyone tried a ZIP 250 or an Syquest EZflyer 230mb with an s760/75077= 0? Any luck? |_e_/~ Dennis Barton ) skylab2000 ~\/\ Brainforest Productions, Los Angeles / http://skylab2000.com - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Tue Nov 21 13:11:42 2000 Received: by hugin.uunet.ca id <193674-27298>; Tue, 21 Nov 2000 13:11:33 -0500 Received: from mail.wtjam.net ([208.238.46.142]) by hugin.uunet.ca with ESMTP id <193673-27298>; Tue, 21 Nov 2000 13:11:23 -0500 Received: from [208.238.46.250] [208.238.46.250] by mail.wtjam.net with ESMTP (SMTPD32-6.00) id AC435F600414; Tue, 21 Nov 2000 13:17:39 -0500 Mime-Version: 1.0 X-Sender: rsp@mail.wtjam.net Message-Id: In-Reply-To: <200011172158_MC2-BB58-C4C7@compuserve.com> References: <200011172158_MC2-BB58-C4C7@compuserve.com> Date: Tue, 21 Nov 2000 13:02:40 -0500 To: dennis barton , sgroup@lists.uunet.ca From: Richard Sven Patterson Subject: Re: sgroup s760? Content-Type: text/plain; charset="us-ascii"; format="flowed" Sender: owner-sgroup@lists.uunet.ca Precedence: bulk At 9:58 pm -0500 17/11/2000, dennis barton wrote: >Has anyone tried a ZIP 250 or an Syquest EZflyer 230mb with an s760/750770? > HI Deniis I use a EZFLYER 230 with mine for the past three or so years... only problem is from the Syquest as it goes through probably its last days. rsp -- richard sven patterson rsp@wtjam.net 876-924-2898 "to fight for truth, justice 876-925-1247 (fax) and the analytical way" hounDog music Please note NEW EMAIL ADDRESS: rsp@wtjam.net - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information. From owner-sgroup Fri Nov 24 10:50:58 2000 Received: by hugin.uunet.ca id <193677-29853>; Fri, 24 Nov 2000 10:50:51 -0500 Received: from hotmail.com (f295.law10.hotmail.com [64.4.14.170]) by hugin.uunet.ca with ESMTP id <193674-29853>; Fri, 24 Nov 2000 10:50:41 -0500 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Fri, 24 Nov 2000 07:50:23 -0800 Received: from 204.171.181.34 by lw10fd.law10.hotmail.msn.com with HTTP; Fri, 24 Nov 2000 15:50:23 GMT X-Originating-IP: [204.171.181.34] From: "David Oleniacz" To: sgroup@lists.uunet.ca Subject: sgroup Upgrade S-770 hard drive Date: Fri, 24 Nov 2000 10:50:23 -0500 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-OriginalArrivalTime: 24 Nov 2000 15:50:23.0068 (UTC) FILETIME=[4150E9C0:01C0562E] Sender: owner-sgroup@lists.uunet.ca Precedence: bulk I want to put a larger hard drive in my S-770. I opened the S-770 and found that the SCSI connector on the 40MB drive is a 40-pin Has anyone out there ever upgraded and could they give me some help on what drive should I get? DavidO _____________________________________________________________________________________ Get more from the Web. FREE MSN Explorer download : http://explorer.msn.com - Sent by the sgroup mailing list on lists.uunet.ca For subscription information, send mail to majordomo@lists.uunet.ca and see http://www.generalconcepts.com/sgroup/ for more information.