From lotus.uwaterloo.ca!owner-sgroup Thu Oct 5 03:36:31 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88215-1>; Thu, 5 Oct 1995 03:36:21 -0400 Received: by lotus.uwaterloo.ca id <18>; Thu, 5 Oct 1995 03:12:26 -0400 Received: from huey.disney.com ([204.128.192.10]) by lotus.uwaterloo.ca with SMTP id <16>; Thu, 5 Oct 1995 03:06:18 -0400 Received: from cc.wdi.disney.com by huey.disney.com (SMI-8.6/SMI-SVR4) id LAA22625; Wed, 4 Oct 1995 11:54:58 -0700 From: Steve_Petitt@cc.wdi.disney.com Received: from cc:Mail by cc.wdi.disney.com id AA812833003; Wed, 04 Oct 95 11:42:48 pst Date: Wed, 4 Oct 1995 15:42:48 -0400 Message-Id: <9509048128.AA812833003@cc.wdi.disney.com> To: sgroup@lotus.uwaterloo.ca Subject: sgroup Need help using sdisk Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I recently found a copy of sdisk, but I'm having a little trouble using it. Since I only have one 3 1/2" floppy drive, how do I convert a file from the .sdk to a readable Roland file (and back).For example;I have a file on my hardrive that is an .sdk file, but it's 737K,so it doesn't fit on a DD floppy. How do I get that file onto a 720K floppy in a Roland format.I should tell you that I'm using an S-550 and a pc.I have alot of custom samples that I got from The Beach Boys and Fleetwood Mac, that I'd like to U/L here, but I can't seem to get the hang of this sdisk thing.Thanks in advance. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 5 07:58:19 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88216-1>; Thu, 5 Oct 1995 07:58:07 -0400 Received: by lotus.uwaterloo.ca id <16>; Thu, 5 Oct 1995 07:45:47 -0400 Received: from wr.com.au ([203.12.42.10]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 5 Oct 1995 07:44:56 -0400 Received: by wr.com.au (5.x/SMI-SVR4-1.0) id AA23498; Thu, 5 Oct 1995 21:43:28 +1000 Message-Id: <9510051143.AA23498@wr.com.au> Subject: Re: sgroup Need help using sdisk To: Steve_Petitt@cc.wdi.disney.com Date: Thu, 5 Oct 1995 07:43:27 -0400 Cc: sgroup@lotus.uwaterloo.ca (Roland Samplers) In-Reply-To: <9509048128.AA812833003@cc.wdi.disney.com> from "Steve_Petitt@cc.wdi.disney.com" at Oct 4, 95 03:42:48 pm From: nic@carrot.com.au (Nic Grant) X-Face: CWvY*`==&6t{gXL499VPU\Q@{>yp6Thfa6V;Qev0p\q]Oi,cV10j} I recently found a copy of sdisk, but I'm having a little trouble using it. => Since I only have one 3 1/2" floppy drive, how do I convert a file from the => .sdk to a readable Roland file (and back).For example;I have a file on my => hardrive that is an .sdk file, but it's 737K,so it doesn't fit on a DD floppy. => How do I get that file onto a 720K floppy in a Roland format.I should tell you => that I'm using an S-550 and a pc.I have alot of custom samples that I got from => The Beach Boys and Fleetwood Mac, that I'd like to U/L here, but I can't seem to => get the hang of this sdisk thing.Thanks in advance. Hi Steve, I've cc'ed my reply to the sgroup list, cause I get quite a lot of mail from people who find the sdisk program difficult to navigate. 737280 is the normal size for an sdk file that will fit on a DD diskette, so the file would appear to be correct. To get the file onto the floppy, follow these easy steps. 1) make sure the floppy is formatted. I prefer to use my sampler to format disks, although disks formatted in the pc will work. 2) start sdisk 3) press the key 4) type the full filename of the sdk file and press enter 5) type the letter on your keyboard that corresponds to the 3.5" floppy drive on your computer. 6) press the key and watch it write the file to your disk 7) try it in the sampler To read a sampler disk into a file, repeat the above, but press the key in step 6. Hope this helps! Regards, Nic. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 5 08:26:28 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88216-2>; Thu, 5 Oct 1995 08:26:25 -0400 Received: by lotus.uwaterloo.ca id <20>; Thu, 5 Oct 1995 08:18:53 -0400 Received: from emout06.mail.aol.com ([198.81.10.43]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 5 Oct 1995 08:18:18 -0400 Received: by emout06.mail.aol.com (8.6.12/8.6.12) id IAA24947 for sgroup@lotus.uwaterloo.ca; Thu, 5 Oct 1995 08:18:13 -0400 Date: Thu, 5 Oct 1995 08:18:13 -0400 From: AlanDMuse@aol.com Message-ID: <951005081813_116701667@emout06.mail.aol.com> To: sgroup@lotus.uwaterloo.ca Subject: sgroup Only *slightly* off-topic Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Well, ladies and gentlemen, I'm absolutely giddy because I just acquired a SCSI interface for my S-550. The seller threw in an 80 meg Seagate drive to boot (pardon the pun). Now the catch is -- how do I provide power to the drive? Can anyone tell me what my options are in doing this. I'd just assume not haul around a big ol' computer power supply. Are there dedicated adapters out there? I'm not Mr. Electronics, so please pardon my ignorance in this area. :) Thanks for any assistance. Alan D. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From math.uwaterloo.ca!lotus.uwaterloo.ca!owner-sgroup Thu Oct 5 11:52:30 1995 Received: from math.uwaterloo.ca ([129.97.140.144]) by watdragon.uwaterloo.ca with SMTP id <88218-1>; Thu, 5 Oct 1995 11:52:22 -0400 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by math.uwaterloo.ca with SMTP id <77902-3>; Thu, 5 Oct 1995 11:52:16 -0400 Received: by lotus.uwaterloo.ca id <22>; Thu, 5 Oct 1995 11:41:43 -0400 Received: from alaska.magpage.com ([204.179.92.50]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 5 Oct 1995 11:40:54 -0400 Received: from modem015.magpage.com by alaska.magpage.com (5.x/SMI-SVR4) id AA01784; Thu, 5 Oct 1995 11:46:59 -0400 Date: Thu, 5 Oct 1995 11:46:59 -0400 Message-Id: <9510051546.AA01784@alaska.magpage.com> X-Sender: borg@magpage.com X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: AlanDMuse@aol.com From: borg@magpage.com Subject: Re: sgroup Only *slightly* off-topic Cc: sgroup@lotus.uwaterloo.ca Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO >Well, ladies and gentlemen, I'm absolutely giddy because I just acquired a >SCSI interface for my S-550. The seller threw in an 80 meg Seagate drive to >boot (pardon the pun). Now the catch is -- how do I provide power to the >drive? Can anyone tell me what my options are in doing this. I'd just assume >not haul around a big ol' computer power supply. Are there dedicated adapters >out there? I'm not Mr. Electronics, so please pardon my ignorance in this >area. :) It sounds like an internal hard drive, without a box for it.. I guess just go to a computer place, get a case and a power supply for it.. ****************************************************************************** *For info & bookings * * contact: ******************************* Yes, you saw us * *Jeremy-302-239-5156 ** G A N G S T E R P U M P ** * * Jeremy2470@aol.com ******************************* * * or ** Delaware Ska-Core ** at SXSW! * *Jeff - 302-239-2209 ******************************* * * borg@magpage.com * ****************************************************************************** * NOTE: We have no relation to the ska band "Gangster Fun" of Detroit. * * We got our name independently from a porn movie! * ****************************************************************************** - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Fri Oct 6 16:48:09 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88218-1>; Fri, 6 Oct 1995 16:47:59 -0400 Received: by lotus.uwaterloo.ca id <15>; Fri, 6 Oct 1995 16:32:46 -0400 Received: from concorde.pix.za ([196.11.62.108]) by lotus.uwaterloo.ca with SMTP id <18>; Fri, 6 Oct 1995 16:31:08 -0400 Received: from net-14.pix.za (net-14.pix.za [196.11.62.142]) by concorde.pix.za (8.6.12/8.6.12) with SMTP id WAA23569 for ; Fri, 6 Oct 1995 22:30:36 +0200 Message-Id: <199510062030.WAA23569@concorde.pix.za> X-Sender: pak05238@pixie.co.za (Unverified) X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Date: Fri, 6 Oct 1995 20:41:05 -0400 To: sgroup@lotus.uwaterloo.ca (Roland Samplers) From: Noel.da.Costa@pixie.co.za (Noel da Costa) Subject: sgroup W-30 ROM waveforms, are they ROM? Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Greetings all, just some musings on the W-30 and a I discovered a decent S-series sound creation team. The Roland W-30 workstation, which is basically an S-series sampler, has its memory arranged into ROM and RAM areas. The RAM areas allow one to add wave data and edit it. The ROM area is supposedly fixed, however it is possible to load different waves into ROM from the system (boot up) disk. Shouldn't it be possible therefore to update these ROM waves? Does anyone know anything about this? I've recently found a new bunch on the net, they call themselves Alltron Vintage Disks, basically they create and sample their own sounds from a selection of vintage synths, drum boxes, modules etc. They have a catelogue of disks, in your choice of formats (S included) listed according to the source synths. They claim that none of the sounds are from CD samplers; all are created from scratch by their sound creation team. I recently applied for a free sample disk that they were advertising, and I found their response prompt and professional. Most importantly, I thought the sounds were quite good, and useful. The contact details for them are: jimw@msn.fullfeed.com (Jim Wohlgemuth) Alltron Vintage Disks http://www.msn.fullfeed.com/planetz pardeeville.wisconsin.usa tel: 608-429-2355=20 Adios, Noel =20 =20 /--- from Johannesburg, South Africa ---\ /| "Be carefull where you aim, |\ =20 |/ Because where you aim you just might hit."\|=20 /| |\ ||_____________--U2=BA"Dirty Day"______________|| =20 |/-------------------------------------------\| /_____________________________________________\ - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 9 06:54:02 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88203-1>; Mon, 9 Oct 1995 06:53:57 -0400 Received: by lotus.uwaterloo.ca id <18>; Mon, 9 Oct 1995 06:37:39 -0400 Received: from enstay2 ([147.250.130.8]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 9 Oct 1995 06:36:46 -0400 Received: by enstay2 (1.37.109.16/16.2) id AA030884881; Mon, 9 Oct 1995 11:34:41 +0100 From: Alexandre Papadacci Message-Id: <199510091034.AA030884881@enstay2> Subject: sgroup S770-V2.24 or not ???? To: sgroup@lotus.uwaterloo.ca Date: Mon, 9 Oct 1995 06:34:41 -0400 Mailer: Elm [revision: 70.85] Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I bought my S750 about 3 years ago and it was equipped with system version 2.15. I saw a version 2.24 on the ftp server lotus.uwaterloo.ca and I would like to know whether it is worth getting it or not... What are the main differences between 2.15 and 2.24 ????? Thank you for answering.... -- Alexandre PAPADACCI papadaca@enstay.ensta.fr - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 10 04:57:54 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-2>; Tue, 10 Oct 1995 04:57:48 -0400 Received: by lotus.uwaterloo.ca id <16>; Tue, 10 Oct 1995 04:46:35 -0400 Received: from enstay2 ([147.250.130.8]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 10 Oct 1995 04:45:43 -0400 Received: by enstay2 (1.37.109.16/16.2) id AA047024425; Tue, 10 Oct 1995 09:40:25 +0100 From: Alexandre Papadacci Message-Id: <199510100840.AA047024425@enstay2> Subject: sgroup S750: Internal disk ???? To: sgroup@lotus.uwaterloo.ca Date: Tue, 10 Oct 1995 04:40:25 -0400 Mailer: Elm [revision: 70.85] Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Did someone here try to install a SCSI hard disk in his S750 ??? Are there connection or power supply problems ???? -- Alexandre PAPADACCI papadaca@enstay.ensta.fr - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 12 06:30:17 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88203-2>; Thu, 12 Oct 1995 06:30:04 -0400 Received: by lotus.uwaterloo.ca id <18>; Thu, 12 Oct 1995 06:17:56 -0400 Received: from us.spinet.cz ([193.86.200.20]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 12 Oct 1995 06:16:59 -0400 Received: from 193.86.192.189 (aipdev.login.cz [193.86.192.189]) by us.spinet.cz (8.6.12/EUnet-CZ) with SMTP id LAA15916 for ; Thu, 12 Oct 1995 11:18:50 +0100 Date: Thu, 12 Oct 1995 06:18:50 -0400 Message-Id: <199510121018.LAA15916@us.spinet.cz> MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit From: aipdev@login.cz Subject: sgroup Does E-mu mailing list exist? To: sgroup@lotus.uwaterloo.ca X-Mailer: SPRY Mail Version: 04.00.06.17 Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Does anybody know if (and where) exists mailing list like this of users of Emu-Systems Samplers (EmaxII, ESI-32, e-64, E-IV)? Please leave a message on my email address: aipdev@login.cz Thanx a lot. ------------------------- - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 12 06:41:56 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88203-3>; Thu, 12 Oct 1995 06:41:50 -0400 Received: by lotus.uwaterloo.ca id <15>; Thu, 12 Oct 1995 06:29:59 -0400 Received: from us.spinet.cz ([193.86.200.20]) by lotus.uwaterloo.ca with SMTP id <16>; Thu, 12 Oct 1995 06:17:20 -0400 Received: from 193.86.192.189 (aipdev.login.cz [193.86.192.189]) by us.spinet.cz (8.6.12/EUnet-CZ) with SMTP id LAA15920 for ; Thu, 12 Oct 1995 11:18:55 +0100 Date: Thu, 12 Oct 1995 06:18:55 -0400 Message-Id: <199510121018.LAA15920@us.spinet.cz> MIME-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit From: aipdev@login.cz Subject: sgroup Sounds wanted! To: sgroup@lotus.uwaterloo.ca X-Mailer: SPRY Mail Version: 04.00.06.17 Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Does anybody have sampled "Drumulator" drum machine? If so, please, leave a message on my Email address: aipdev@login.cz Thanx and bye. ------------------------------- - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 12 09:52:52 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88215-3>; Thu, 12 Oct 1995 09:52:50 -0400 Received: by lotus.uwaterloo.ca id <16>; Thu, 12 Oct 1995 09:44:56 -0400 Received: from enstay2 ([147.250.130.8]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 12 Oct 1995 09:44:07 -0400 Received: by enstay2 (1.37.109.16/16.2) id AA112545306; Thu, 12 Oct 1995 14:41:46 +0100 From: Alexandre Papadacci Message-Id: <199510121341.AA112545306@enstay2> Subject: sgroup S750<- SCSI <- SCSI -> MAC To: sgroup@lotus.uwaterloo.ca Date: Thu, 12 Oct 1995 09:41:46 -0400 Mailer: Elm [revision: 70.85] Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO \|/ @ @ -----------------------------oOO-(_)-OOo------------------------------ Hi !! Did anyone in the sgroup list try to connect through SCSI a Macintosh and a S750 ??? Can both machine boot in this configuration ? Isn't there any problem of master and slave on the SCSI chain ?? In fact, I would like to buy a Mac (PowerMac8500 for example) in order to transfer samples from the S750 to the Mac by SCSI, then execute big FFTs, wavelets transforms and digital processings and send back the sample to the S750 (the kind of things Avallon and Alchemy do (even if I don't if they are able to SCSI transfer samples from-to the S750) except that I would like to program that myself (for pleasure as well as for money saving))... I already tried to connect an Atari 1040 to the S750 through SCSI (using a DMA SCSI port) but the Atari refused to boot (not the S750)...And I thought it was a problem of SCSI master-slave or maybe a problem of chain termination.. Did someone encounter the same problem with a ST1040 ??? Did someone try the same with a Falcon030 ?? And with a Macintosh ??? Please help me.... Alexandre PAPADACCI Ingenieur Civil des Mines a 6KF par an papadaca@enstay.ensta.fr - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 12 13:40:30 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88223-1>; Thu, 12 Oct 1995 13:40:25 -0400 Received: by lotus.uwaterloo.ca id <18>; Thu, 12 Oct 1995 13:32:15 -0400 Received: from audumla.students.wisc.edu ([144.92.104.66]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 12 Oct 1995 13:31:25 -0400 Received: from by audumla.students.wisc.edu; id MAA50418; 8.6.9W/42; Thu, 12 Oct 1995 12:31:14 -0500 Date: Thu, 12 Oct 1995 13:31:14 -0400 Message-Id: <199510121731.MAA50418@audumla.students.wisc.edu> X-Sender: rwpeeble@facstaff.wisc.edu (Unverified) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sgroup@lotus.uwaterloo.ca From: rwpeeble@facstaff.wisc.edu (Ross Peebles) Subject: Re: sgroup Need help using sdisk (More questions) X-Mailer: Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO >to quote Steve_Petitt@cc.wdi.disney.com: =>I recently found a copy of sdisk, but I'm having a little trouble using it. => Since I only have one 3 1/2" floppy drive, how do I convert a file from the => .sdk to a readable Roland file (and back).For example;I have a file on my => hardrive that is an .sdk file, but it's 737K,so it doesn't fit on a DD floppy. => How do I get that file onto a 720K floppy in a Roland format.I should tell you => that I'm using an S-550 and a pc.I have alot of custom samples that I got from => The Beach Boys and Fleetwood Mac, that I'd like to U/L here, but I can't seem to => get the hang of this sdisk thing.Thanks in advance. Hello everyone, First, I would like to mention that I am new to the list and this is my first post. I have downloaded the sdisk program from the waterloo FTP site and have been unsuccessful is using to either read or write sounds sdisks to a Roland S-50 sampler. I have version 1.0 of S-Disk. Following the instructions, I formatted several disks with the S-50 and then tried to use S-Disk to convert several sound disk files that I downloaded from the S-50 archives at Waterloo. After running S-Disk ("write to disk") to write these files to disk (which seemed to work, since it it did say xx% complete as the disk driver operated), I then tried loading them into the S-50 and there was not any sound files on the disk. Since I formatted the disk with the S-50, it would boot up without any patches. By the way, I am using Version 2.0 of the S-50 operating system, if that makes a difference. Since then, I have tried this on several different computers (IBM compatibles) and have had know luck. This should eliminate any possibility that it was the disk drive or problems with a specific computer. Next, I tried to go the other way, thinking that perhaps the S-50 disk drive was out of allignment. I took a commerical sound disk that worked with the S-50 and tried to read it with SDISK to the hard drive. The SDISK program screen read: 720K (S50) diskette in drive a: but upon reading the disk, I got the following error: Reading diskette in drive a: to file SDISK.out Diskette error: Sector not found I would appreciate any help in resolving my problem. Is there something I am doing wrong? Has anyone else had this problem? I also heard that there is a similar program to SDISK called SAMDISK. Has anyone tried this and found that it works? If so, where do I find a copy of it. Thanks for your help. Ross Peebles e-mail:rwpeeble@facstaff.wisc.edu - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 12 14:00:07 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88224-1>; Thu, 12 Oct 1995 13:59:52 -0400 Received: by lotus.uwaterloo.ca id <16>; Thu, 12 Oct 1995 13:52:19 -0400 Received: from uwimona.edu.jm ([196.3.0.2]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 12 Oct 1995 13:51:29 -0400 Received: by uwimona.edu.jm (4.1/SMI-4.1) id AA26380; Thu, 12 Oct 95 12:49:41-050 Date: Thu, 12 Oct 1995 13:49:41 -0400 From: Richard Sven Patterson To: sgroup Subject: sgroup s-760 version 2.19 and syquest Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hi, Has anyone with a S-760 running system 2.19 have any problems using a 270MB syquest drive? I have a syquest drive that I both in May that has been giving me sheer hell. My cartridges keep on eventually saying WRITE PROTECTED whichever way the tab button is set. I have already had the drive replaced twice by syquest and a cartridge that seemed to work fine up to last night, now had problems writing more than 200Mb data mark and now says the same WRITE PROTECTED. Any ideas, suggestion would be helpful. thanks, richard sven. p.s. I have taking my SCSI system attached to the S-760 to the MAC without success as here too the drive keeps saying write protected. thanks a million in advance, richard sven ------------------------------------------------------------------------------ richard sven patterson hounDog music patterso@uwimona.edu.jm "to fight for truth, justice and the analytical way" 809-924-2898 (voice) 809-925-1247 (fax) - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 12 15:25:19 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88223-3>; Thu, 12 Oct 1995 15:25:12 -0400 Received: by lotus.uwaterloo.ca id <18>; Thu, 12 Oct 1995 15:13:51 -0400 Received: from ucsub.colorado.edu ([128.138.129.12]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 12 Oct 1995 15:13:02 -0400 Received: (from lyk@localhost) by ucsub.colorado.edu (8.6.12/8.6.12/CNS-3.6) id NAA00274; Thu, 12 Oct 1995 13:12:50 -0600 Date: Thu, 12 Oct 1995 15:12:48 -0400 From: lyk@ucsub.colorado.edu To: sgroup@lotus.uwaterloo.ca Subject: sgroup lagness. In-Reply-To: <199510121018.LAA15916@us.spinet.cz> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO well, the ftp site at uwaterloo is kinda dead. everytime i go there, There aint nothing new. there hasn't been for months now. what's going on? - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 12 16:06:28 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88224-3>; Thu, 12 Oct 1995 16:06:15 -0400 Received: by lotus.uwaterloo.ca id <20>; Thu, 12 Oct 1995 15:57:49 -0400 Received: from opal.spawar.navy.mil ([192.26.7.3]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 12 Oct 1995 15:56:59 -0400 Received: from smtp-gw.spawar.navy.mil by opal.spawar.navy.mil (4.1/SMI-4.1) id AA05210; Thu, 12 Oct 95 15:52:30 EDT Received: from ccMail by smtp-gw.spawar.navy.mil (IMA Internet Exchange 1.04b) id 07d73200; Thu, 12 Oct 95 15:57:20 -0400 Mime-Version: 1.0 Date: Thu, 12 Oct 1995 15:49:16 -0400 Message-Id: <07d73200@smtp-gw.spawar.navy.mil> From: ramsayd@smtp-gw.spawar.navy.mil (Douglas Ramsay) Subject: Re: sgroup lagness. To: sgroup@lotus.uwaterloo.ca Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Description: cc:Mail note part Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I e-mailed Bill Fox (Bill, u still with us?) regarding uploading the tremendous sample library of effects and instruments that users were creating and exchanging back in the '91-92 timeframe. He's supposed to be the librarian for that stuff. Anybody know the status? I, myself, was supposed to be working on converting Looney Tune samples from .au format to S550 format, but "newlywed-ism" and music rehearsal have taken over (for the time being anyway). Will get to it soon. I've got 98% of the TX16W sample ardhives at home if anyone is interested. I can upload the index/descriptions of the samples if it's cool with John... peace... Doug ================================================= / `-' / ,,, |[====|||||||||||[:::} My type of "g-strings" \__.-._\ ``` >>>>>>>> Acknowledge Him Productions <<<<<<<< Mitchellville, MD (301) 499.7271 (vox) (703) 807.8639 (pager) ================================================= ______________________________ Reply Separator _________________________________ Subject: sgroup lagness. Author: lyk@ucsub.colorado.edu at SMTP-GW Date: 10/12/95 3:12 PM well, the ftp site at uwaterloo is kinda dead. everytime i go there, There aint nothing new. there hasn't been for months now. what's going on? - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 12 16:28:22 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88224-3>; Thu, 12 Oct 1995 16:28:10 -0400 Received: by lotus.uwaterloo.ca id <22>; Thu, 12 Oct 1995 16:19:56 -0400 Received: from watdragon.uwaterloo.ca ([129.97.140.24]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 12 Oct 1995 16:19:02 -0400 Received: by watdragon.uwaterloo.ca id <88223-1>; Thu, 12 Oct 1995 16:18:45 -0400 From: "John M. Sellens" To: ramsayd@smtp-gw.spawar.navy.mil, sgroup@lotus.uwaterloo.ca Subject: Re: sgroup lagness. Message-Id: <95Oct12.161845edt.88223-1@watdragon.uwaterloo.ca> Date: Thu, 12 Oct 1995 16:18:42 -0400 Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO | From lotus.uwaterloo.ca!owner-sgroup Thu Oct 12 16:06:28 1995 | From: ramsayd@smtp-gw.spawar.navy.mil (Douglas Ramsay) | Subject: Re: sgroup lagness. | To: sgroup@lotus.uwaterloo.ca | | I e-mailed Bill Fox (Bill, u still with us?) regarding uploading the | tremendous sample library of effects and instruments that users were | creating and | exchanging back in the '91-92 timeframe. He's supposed | to be the librarian for that stuff. Anybody know the status? I think Bill is trying to find the opportunity to upload the sgroup library to lotus, but is finding it difficult to find the opportunity to do so, given network loads and so on. | I, myself, was supposed to be working on converting Looney Tune samples | from .au format to S550 format, but "newlywed-ism" and music rehearsal | have taken over (for the time being anyway). Will get to it soon. I've | got 98% of the TX16W sample ardhives at home if anyone is interested. | I can upload the index/descriptions of the samples if it's cool with John... That would be cool -- if anyone has anything to upload to lotus, just let me know. If it's "small", feel free to just email it directly to me. John jmsellens@watdragon.uwaterloo.ca - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From ucsub.colorado.edu!lyk Thu Oct 12 18:00:29 1995 Received: from ucsub.colorado.edu ([128.138.129.12]) by watdragon.uwaterloo.ca with SMTP id <88224-3>; Thu, 12 Oct 1995 18:00:18 -0400 Received: (from lyk@localhost) by ucsub.colorado.edu (8.6.12/8.6.12/CNS-3.6) id PAA27588; Thu, 12 Oct 1995 15:59:44 -0600 Date: Thu, 12 Oct 1995 17:59:35 -0400 From: lyk@ucsub.colorado.edu To: "John M. Sellens" cc: ramsayd@smtp-gw.spawar.navy.mil, sgroup@lotus.uwaterloo.ca Subject: Re: sgroup lagness. In-Reply-To: <95Oct12.161845edt.88223-1@watdragon.uwaterloo.ca> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Status: RO Is there anyone out there that have samples to upload to uwaterloo? please upload. thank you. From lotus.uwaterloo.ca!owner-sgroup Fri Oct 13 08:38:41 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88225-1>; Fri, 13 Oct 1995 08:38:31 -0400 Received: by lotus.uwaterloo.ca id <16>; Fri, 13 Oct 1995 08:26:19 -0400 Received: from chaplin.rz.uni-frankfurt.de ([141.2.22.74]) by lotus.uwaterloo.ca with SMTP id <15>; Fri, 13 Oct 1995 08:25:24 -0400 Received: from rz.uni-frankfurt.de by chaplin.rz.uni-frankfurt.de with Local SMTP (PP) id <15632-0@chaplin.rz.uni-frankfurt.de>; Fri, 13 Oct 1995 13:09:02 +0100 Message-ID: <307E4954.78FA@stud.uni-frankfurt.de> Date: Fri, 13 Oct 1995 07:11:16 -0400 From: Mickey X-Mailer: Mozilla 2.0b1 (Windows; I; 32bit) MIME-Version: 1.0 To: sgroup@lotus.uwaterloo.ca Subject: Re: sgroup<- SCSI <- SCSI -> MAC Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Alexandre Papadacci wrote: > Did anyone in the sgroup list try to connect through SCSI a Macintosh > and a S750 ??? Can both machine boot in this configuration ? Isn't there > any problem of master and slave on the SCSI chain ?? > Did someone encounter the same problem with a ST1040 ??? Did someone try the > same with a Falcon030 ?? And with a Macintosh ??? Hi Alexandre! It seems that you're not interested if it functions with a PC. Maybe I'll tell it anyway: I've connected like this: [ (Termination) --- S750 (ID 7) --- SyQuest270 (ID 2) --- SyQuest88 (ID 3) --- PC (ID 7) --- ] (Termination) This setup is functioning pretty good! Although it's forbidden by several SCSI drafts to assign two devices the same ID, I use this now for a year without problems. Both the S750 and the PC are turned on, and can access the appropiate devices. Naturally, they can't talk to each other. > In fact, I would like to buy a Mac (PowerMac8500 for example) in order to > transfer samples from the S750 to the Mac by SCSI, then execute big FFTs, > wavelets transforms and digital processings and send back the sample to > the S750 (the kind of things Avallon and Alchemy do (even if I don't if > they are able to SCSI transfer samples from-to the S750) except that I would > like to program that myself (for pleasure as well as for money saving))... Not too easy, but if you're interested the SCSI fileformat, mail me. > I already tried to connect an Atari 1040 to the S750 through SCSI (using > a DMA SCSI port) but the Atari refused to boot (not the S750)...And I thought > it was a problem of SCSI master-slave or maybe a problem of chain termination.. Sounds really like a termination problem. SCSI is sometimes like a bag of magic. Sometimes you must break the rules in order to get something functioning. Good luck! <================================================================> <= Michael 'Mickey' Lauer => <= SMTP: mlauer@stud.uni-frankfurt.de => <================================================================> <= Win32 / MSVC++ / MIDI => <================================================================> - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Sat Oct 14 06:14:51 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88200-1>; Sat, 14 Oct 1995 06:14:45 -0400 Received: by lotus.uwaterloo.ca id <20>; Sat, 14 Oct 1995 05:54:53 -0400 Received: from foxbat.pix.za ([196.11.62.105]) by lotus.uwaterloo.ca with SMTP id <16>; Sat, 14 Oct 1995 05:53:39 -0400 Received: from net-29.pix.za (net-29.pix.za [196.11.62.157]) by foxbat.pix.za (8.6.12/8.6.12) with SMTP id LAA02072 for ; Sat, 14 Oct 1995 11:53:52 +0200 Message-Id: <199510140953.LAA02072@foxbat.pix.za> X-Sender: pak05238@pixie.co.za (Unverified) X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Sat, 14 Oct 1995 10:04:19 -0400 To: sgroup@lotus.uwaterloo.ca (Roland Samplers) From: Noel.da.Costa@pixie.co.za (Noel da Costa) Subject: sgroup W-30 systems disk Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I was just wondering if anyone knows whether there is a new release of the W-30 system disk. The version I have is 1.05 (1989/08/21). Also, would it be on any ftp sights? Thanks in advance, Noel - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From math.uwaterloo.ca!lotus.uwaterloo.ca!owner-sgroup Sat Oct 14 20:45:19 1995 Received: from math.uwaterloo.ca ([129.97.140.144]) by watdragon.uwaterloo.ca with SMTP id <88223-3>; Sat, 14 Oct 1995 20:45:10 -0400 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by math.uwaterloo.ca with SMTP id <77306-2>; Sat, 14 Oct 1995 20:44:59 -0400 Received: by lotus.uwaterloo.ca id <24>; Sat, 14 Oct 1995 20:28:05 -0400 Received: from foxbat.pix.za ([196.11.62.105]) by lotus.uwaterloo.ca with SMTP id <15>; Sat, 14 Oct 1995 20:27:13 -0400 Received: from net-25.pix.za (net-25.pix.za [196.11.62.153]) by foxbat.pix.za (8.6.12/8.6.12) with SMTP id CAA06051 for ; Sun, 15 Oct 1995 02:27:21 +0200 Message-Id: <199510150027.CAA06051@foxbat.pix.za> X-Sender: pak05238@pixie.co.za (Unverified) X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Date: Sun, 15 Oct 1995 00:37:48 -0400 To: sgroup@lotus.uwaterloo.ca (Roland Samplers) From: Noel.da.Costa@pixie.co.za (Noel da Costa) Subject: sgroup Test Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hi, sorry to waste your time, but I'm new to the S-Group and I just want to check that my E-mail is getting through. I''ve been sending to: sgroup@lotus.uwaterloo.ca (Roland Samplers) Is this correct? Could someone please answer just so I know that I'm getting through. Thanks, Noel =20 =20 /--- from Johannesburg, South Africa ---\ /| "Be carefull where you aim, |\ =20 |/ Because where you aim you just might hit."\|=20 /| |\ ||_____________--U2=BA"Dirty Day"______________|| =20 |/-------------------------------------------\| /_____________________________________________\ - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Sun Oct 15 01:44:56 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88201-1>; Sun, 15 Oct 1995 01:44:43 -0400 Received: by lotus.uwaterloo.ca id <26>; Sun, 15 Oct 1995 01:34:53 -0400 Received: from relay1.geis.com ([192.77.188.2]) by lotus.uwaterloo.ca with SMTP id <15>; Sun, 15 Oct 1995 01:34:03 -0400 Received: by relay1.geis.com (1.37.109.11/15.6) id AA054945223; Sun, 15 Oct 1995 05:33:43 GMT From: s.petitt@genie.geis.com Message-Id: <199510150533.AA054945223@relay1.geis.com> Date: Sun, 15 Oct 1995 01:20:00 -0400 To: pongo@wavenet.com, sgroup@lotus.uwaterloo.ca Subject: sgroup NEW RC-100 and DT-100's 4 sale X-Genie-Id: 4729791 X-Genie-From: S.PETITT Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I have several RC-100 remote controllers and DT-100 digitizer tablets for Roland samplers for sale.The RC-100 lists for $495.00 and the DT-100 lists for $295.00. I'm selling the RC-100's for $75.00 and the DT-100's for $30.00. These are brand new in the boxes and have never been used,and they are not stolen either! I just got a great deal on them, and thought some of you might need some.e-mail to: pongo@wavenet.com or spetitt@genie.geis.com - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Sun Oct 15 06:45:37 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-3>; Sun, 15 Oct 1995 06:45:34 -0400 Received: by lotus.uwaterloo.ca id <28>; Sun, 15 Oct 1995 06:27:03 -0400 Received: from foxbat.pix.za ([196.11.62.105]) by lotus.uwaterloo.ca with SMTP id <15>; Sun, 15 Oct 1995 06:26:25 -0400 Received: from net-14.pix.za (net-14.pix.za [196.11.62.142]) by foxbat.pix.za (8.6.12/8.6.12) with SMTP id MAA22786 for ; Sun, 15 Oct 1995 12:26:36 +0200 Message-Id: <199510151026.MAA22786@foxbat.pix.za> X-Sender: pak05238@pixie.co.za X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Date: Sun, 15 Oct 1995 10:37:04 -0400 To: sgroup@lotus.uwaterloo.ca (Roland Samplers) From: Noel.da.Costa@pixie.co.za (Noel da Costa) Subject: sgroup W-30 revelations Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hi everyone I've had my W-30 since 1989 and I only discovered a major function of it last month. So just in case there are any other brainless dodos out there like me... If you put all the programming for W-30 internal sound on their own sequencer tracks (i.e. seperate from programming for external sounds), you can turn the track's external MIDI signal off (this you'll find under Track Parameters on the Record page [F3 - TRK PRM], just switch external to off - F5 toggles), this effectively gives you more than 16 MIDI channels (up to 32) to work with! In other words you can take up all 16 MIDI channels for external sounds on modules, other slave keyboards, etc. and still use a further 16 channels internally.=20 Adios, Noel =20 =20 /--- from Johannesburg, South Africa ---\ /| "Be carefull where you aim, |\ =20 |/ Because where you aim you just might hit."\|=20 /| |\ ||_____________--U2=BA"Dirty Day"______________|| =20 |/-------------------------------------------\| /_____________________________________________\ - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Sun Oct 15 10:33:00 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-3>; Sun, 15 Oct 1995 10:32:51 -0400 Received: by lotus.uwaterloo.ca id <39>; Sun, 15 Oct 1995 10:19:35 -0400 Received: from uwimona.edu.jm ([196.3.0.2]) by lotus.uwaterloo.ca with SMTP id <15>; Sun, 15 Oct 1995 10:18:44 -0400 Received: by uwimona.edu.jm (4.1/SMI-4.1) id AA23117; Sun, 15 Oct 95 09:15:12-050 Date: Sun, 15 Oct 1995 10:15:11 -0400 From: Richard Sven Patterson To: s.petitt@genie.geis.com Cc: pongo@wavenet.com, sgroup@lotus.uwaterloo.ca Subject: Re: sgroup NEW RC-100 and DT-100's 4 sale In-Reply-To: <199510150533.AA054945223@relay1.geis.com> Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO What are DT-100 digitizer tablets, and can they be useful for the S-760. thanks, richard sven ------------------------------------------------------------------------------ richard sven patterson hounDog music patterso@uwimona.edu.jm "to fight for truth, justice and the analytical way" 809-924-2898 (voice) 809-925-1247 (fax) On Sun, 15 Oct 1995 s.petitt@genie.geis.com wrote: > I have several RC-100 remote controllers and DT-100 digitizer > tablets for Roland samplers for sale.The RC-100 lists for > $495.00 and the DT-100 lists for $295.00. > I'm selling the RC-100's for $75.00 and the DT-100's for $30.00. > These are brand new in the boxes and have never been used,and > they are not stolen either! I just got a great deal on them, > and thought some of you might need some.e-mail to: > pongo@wavenet.com or spetitt@genie.geis.com > > - > Sent by the sgroup mailing list on lotus.uwaterloo.ca > For subscription information, send mail to majordomo@lotus.uwaterloo.ca > - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Sun Oct 15 20:37:28 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-1>; Sun, 15 Oct 1995 20:37:20 -0400 Received: by lotus.uwaterloo.ca id <67>; Sun, 15 Oct 1995 20:26:52 -0400 Received: from ucsub.colorado.edu ([128.138.129.12]) by lotus.uwaterloo.ca with SMTP id <15>; Sun, 15 Oct 1995 20:25:26 -0400 Received: (from lyk@localhost) by ucsub.colorado.edu (8.6.12/8.6.12/CNS-3.6) id SAA19359; Sun, 15 Oct 1995 18:24:57 -0600 Date: Sun, 15 Oct 1995 20:24:55 -0400 From: lyk@ucsub.colorado.edu To: s.petitt@genie.geis.com cc: pongo@wavenet.com, sgroup@lotus.uwaterloo.ca Subject: Re: sgroup NEW RC-100 and DT-100's 4 sale In-Reply-To: <199510150533.AA054945223@relay1.geis.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO what is it actually. the rc-100--> what does it do? does it work for the S-550? and the same with the dt-100 digitizer? On Sun, 15 Oct 1995 s.petitt@genie.geis.com wrote: > I have several RC-100 remote controllers and DT-100 digitizer > tablets for Roland samplers for sale.The RC-100 lists for > $495.00 and the DT-100 lists for $295.00. > I'm selling the RC-100's for $75.00 and the DT-100's for $30.00. > These are brand new in the boxes and have never been used,and > they are not stolen either! I just got a great deal on them, > and thought some of you might need some.e-mail to: > pongo@wavenet.com or spetitt@genie.geis.com > > - > Sent by the sgroup mailing list on lotus.uwaterloo.ca > For subscription information, send mail to majordomo@lotus.uwaterloo.ca > - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Sun Oct 15 21:10:18 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-3>; Sun, 15 Oct 1995 21:10:16 -0400 Received: by lotus.uwaterloo.ca id <111>; Sun, 15 Oct 1995 20:53:54 -0400 Received: from wr.com.au ([203.12.42.10]) by lotus.uwaterloo.ca with SMTP id <15>; Sun, 15 Oct 1995 20:53:04 -0400 Received: by wr.com.au (5.x/SMI-SVR4-1.0) id AA01464; Mon, 16 Oct 1995 10:55:35 +1000 Message-Id: <9510160055.AA01464@wr.com.au> Subject: Re: sgroup Need help using sdisk (More questions) To: rwpeeble@facstaff.wisc.edu (Ross Peebles) Date: Sun, 15 Oct 1995 20:55:35 -0400 Cc: sgroup@lotus.uwaterloo.ca In-Reply-To: <199510121731.MAA50418@audumla.students.wisc.edu> from "Ross Peebles" at Oct 12, 95 01:31:14 pm From: nic@carrot.com.au (Nic Grant) X-Face: CWvY*`==&6t{gXL499VPU\Q@{>yp6Thfa6V;Qev0p\q]Oi,cV10j} First, I would like to mention that I am new to the list and this is my => first post. I have downloaded the sdisk program from the waterloo FTP site => and have been unsuccessful is using to either read or write sounds sdisks to => a Roland S-50 sampler. I have version 1.0 of S-Disk. Following the [ ... snip ... ] => I would appreciate any help in resolving my problem. Is there something I => am doing wrong? Has anyone else had this problem? I also heard that there => is a similar program to SDISK called SAMDISK. Has anyone tried this and => found that it works? If so, where do I find a copy of it. Hi All, I don't have an S50 sampler, but when I developed sdisk, some kind soul sent me a S50 disk. I had no trouble duplicating the disk using sdisk, but of course could never test it in my sampler. I did a byte by byte comparison of the original disk and a copy I made and they were identical as far as the PC goes. However, I have just read my manual for the S750 and when it talks about loading in files from other samplers, the S50 is explicitly *not* supported by the S7xx sampler. What this says to me is that the format of S50 disks is different from 550/W30, and by the sounds of all those unhappy people who have tried sdisk with an S50 out there, it is also not in a PC compatible format. The point of this I guess is that I don't think sdisk will work with S50 diskettes. As sdisk just does a sector by sector copy of the diskette, I don't think there is anything I can do to make it work. I am sorry. If someone has any suggestions (not lewd), please let us all know. Has anyone out there been successful in using sdisk or samdisk to read and write S50 diskettes? If no-one replies, then I guess we can safely say that S50 diskettes are not supported by sdisk (and maybe samdisk?). My apologies for any inconvenience caused. Regards, Nic. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 16 04:15:27 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-2>; Mon, 16 Oct 1995 04:15:18 -0400 Received: by lotus.uwaterloo.ca id <114>; Mon, 16 Oct 1995 03:59:36 -0400 Received: from comsun.rz.uni-regensburg.de ([132.199.1.163]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 16 Oct 1995 03:58:44 -0400 Received: from ngate.ngate.uni-regensburg.de (ngate.rz.uni-regensburg.de) by comsun.rz.uni-regensburg.de with SMTP id AA11449 (5.65c/IDA-1.4.4 for ); Mon, 16 Oct 1995 08:56:43 +0100 Received: from rzi.ngate.uni-regensburg.de by ngate.ngate.uni-regensburg.de; Mon, 16 Oct 95 08:55 GMT Received: from RZI/SpoolDir by rzi.ngate.uni-regensburg.de (Mercury 1.21); 16 Oct 95 08:56:43 +0100 Received: from SpoolDir by RZI (Mercury 1.21); 16 Oct 95 08:56:26 +0100 From: "Peter Heitzer" To: nic@carrot.com.au (Nic Grant), sgroup@lotus.uwaterloo.ca Date: Mon, 16 Oct 1995 03:56:21 -0400 Subject: Re: sgroup Need help using sdisk (More questions) Content-Length: 1498 Content-Type: text X-Confirm-Reading-To: "Peter Heitzer" X-Pmrqc: 1 Priority: normal X-Mailer: Pegasus Mail v3.22 Message-Id: <584351670AD@rzi.ngate.uni-regensburg.de> Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO > What this says to me is that the format of S50 disks is different from > 550/W30, and by the sounds of all those unhappy people who have tried > sdisk with an S50 out there, it is also not in a PC compatible format. That's not true! I have an S-50 and the format is physically compatible with a 720 KB disk, i.e. 2 sides of 80 tracks with 9 sectors. If you read the disk sector by sector then it should work. > > Has anyone out there been successful in using sdisk or samdisk to read and > write S50 diskettes? If no-one replies, then I guess we can safely say > that S50 diskettes are not supported by sdisk (and maybe samdisk?). I have used samdisk on my mac and it does support all Roland 12bit samplers and of course it supports the S-50. The S-50 disk format was supported by the S-330 and S-550 series. The format is different regarding the tone and patch parameters but the wave data is the same (and even starting at the same sector) Peter ********************************************************** * Dipl.-Inform. Peter Heitzer * * Rechenzentrum der Universitaet Regensburg * * Universitaetsstrasse 31 * * 93053 Regensburg, Germany * * * * phone +49 941 943 4850, fax +49 941 943 4857 * * mail Peter.Heitzer@rz.uni-regensburg.de * ********************************************************** - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 16 04:31:07 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-3>; Mon, 16 Oct 1995 04:31:05 -0400 Received: by lotus.uwaterloo.ca id <136>; Mon, 16 Oct 1995 04:17:13 -0400 Received: from wr.com.au ([203.12.42.10]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 16 Oct 1995 04:15:25 -0400 Received: by wr.com.au (5.x/SMI-SVR4-1.0) id AA06006; Mon, 16 Oct 1995 18:09:27 +1000 Message-Id: <9510160809.AA06006@wr.com.au> Subject: Re: sgroup Need help using sdisk (More questions) To: Peter.Heitzer@rz.uni-regensburg.de (Peter Heitzer) Date: Mon, 16 Oct 1995 04:09:26 -0400 Cc: nic@carrot.com.au, sgroup@lotus.uwaterloo.ca In-Reply-To: <584351670AD@rzi.ngate.uni-regensburg.de> from "Peter Heitzer" at Oct 16, 95 08:56:21 am From: nic@carrot.com.au (Nic Grant) X-Face: CWvY*`==&6t{gXL499VPU\Q@{>yp6Thfa6V;Qev0p\q]Oi,cV10j} > 550/W30, and by the sounds of all those unhappy people who have tried => > sdisk with an S50 out there, it is also not in a PC compatible format. => That's not true! I have an S-50 and the format is physically compatible => with a 720 KB disk, i.e. 2 sides of 80 tracks with 9 sectors. If you read => the disk sector by sector then it should work. Great. I was hoping someone would reply and correct me. So I still don't know why some people have a lot of trouble getting sdisk to work. It works fine for me :-) However, if someone has used sdisk successfully with S50, please let us all know! If I get enough pointers maybe the problems can be solved. Regards, Nic. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 16 12:06:52 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88198-3>; Mon, 16 Oct 1995 12:06:38 -0400 Received: by lotus.uwaterloo.ca id <16>; Mon, 16 Oct 1995 11:42:19 -0400 Received: from gw2.att.com ([192.20.239.134]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 16 Oct 1995 11:41:26 -0400 Received: from aloft.UUCP by ig1.att.att.com id AA10764; Mon, 16 Oct 95 10:48:51 EDT From: wbf@aloft.att.com (william.b.fox) To: analogue@hyperreal.com, dat-heads@virginia.edu, emusic-l@american.edu, gib@mailhost.tcs.tulane.edu, midi@dsps2.att.com, mirage@hpdsojk.ptp.hp.com, sgroup@lotus.uwaterloo.ca, space-music@cs.uwp.edu, sy-list@chorus.fr, synth-l@american.edu, vectory@webcom.com, wavestation@otax.tky.hut.fi, wbf@aloft.att.com, xpansions@webcom.com Received: from acropolis by aloft (4.1/DCS-aloft-M3.1) id AA09881; Mon, 16 Oct 95 10:39:27 EDT Received: by acropolis (4.1/DCS-aloft_spooler-S2.1) id AA04028; Mon, 16 Oct 95 10:39:24 EDT Date: Mon, 16 Oct 1995 10:39:24 -0400 Original-From: aloft!wbf (william.b.fox) Message-Id: <9510161439.AA04028@acropolis> Original-To: hyperreal.com!analogue, virginia.edu!dat-heads, american.edu!emusic-l, mailhost.tcs.tulane.edu!gib, dsps2.att.com!midi, hpdsojk.ptp.hp.com!mirage, lotus.uwaterloo.ca!sgroup, cs.uwp.edu!space-music, chorus.fr!sy-list, american.edu!synth-l, webcom.com!vectory, otax.tky.hut.fi!wavestation, wbf, webcom.com!xpansions Subject: sgroup Call For Music Submissions Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hello Musician Friends, Since I'm posting this to several lists, not all of which am I currently a member, please excuse me if you are bothered by seeing this post multiple times. And please, make all responses to my personal email address, not to any of the lists, unless your comments warrant wider discussion. WDIY 88.1 FM in Bethlehem, Pennsylvania is a new Public Radio Station, serving the Lehigh Valley (Allentown, Bethlehem, Easton, and surrounding communities). It came on the air on January 1, 1995 and is aptly named. It is truely "Do It Yourself" radio. There are only four emplyees - all the rest of the people who run and operate the station are volunteers! I'm one of the many volunteers, having engineered one of the locally produced shows. But now I have my license from the FCC and plan to take a more active role and hopefully an on air role as soon as possible. Hence, this call for music. Last night, I "discovered" that WDIY has a weekly Experimental Music program. (Sunday from 11pm to 1am.) It follows a Contemporary Classical Music program. Although the Experimental Music program is including Ambient music, I'd like to host a show that is more emusic and ambient oriented. To this end, I'd like to beef up the station's library of music with your contributions. If you have Experimental, Emusic, Ambient, Electro-acoustic, or other suitable music that you'd like to receive airplay exposure, please send your audio cassette, LP, CD, or DAT to: Bill Fox c/o WDIY 88.1 FM 301 Broadway Bethlehem, Pennsylvania 18015 To communicat with me, here's my email address: wbf@aloft.att.com Thanks! - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 16 14:13:02 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-2>; Mon, 16 Oct 1995 14:12:21 -0400 Received: by lotus.uwaterloo.ca id <20>; Mon, 16 Oct 1995 13:53:26 -0400 Received: from huey.disney.com ([204.128.192.10]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 16 Oct 1995 13:52:35 -0400 Received: from cc.wdi.disney.com by huey.disney.com (SMI-8.6/SMI-SVR4) id KAA05452; Mon, 16 Oct 1995 10:50:52 -0700 From: Steve_Petitt@cc.wdi.disney.com Received: from cc:Mail by cc.wdi.disney.com id AA813865945; Mon, 16 Oct 95 10:35:05 pst Date: Mon, 16 Oct 1995 14:35:05 -0400 Message-Id: <9509168138.AA813865945@cc.wdi.disney.com> To: sgroup@lotus.uwaterloo.ca Subject: sgroup RC-100/DT-100 works on... Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I spoke to Roland product support today, and the RC-100 will work on all Roland samplers EXCEPT for the S-50.It works on the s-330, s-550 and the s-7xx series. The DT-100 will ONLY work on the s-50. e-mail me @ spetitt@genie.geis.com or better yet, pongo@wavenet.com if interested. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 16 23:39:32 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88184-2>; Mon, 16 Oct 1995 23:39:23 -0400 Received: by lotus.uwaterloo.ca id <16>; Mon, 16 Oct 1995 23:26:41 -0400 Received: from vespucci.iquest.com ([199.170.120.42]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 16 Oct 1995 23:25:51 -0400 Received: from [204.177.193.138] (cornutt.iquest.com [204.177.193.138]) by vespucci.iquest.com (8.6.9/8.6.9 Secure) with SMTP id WAA05053 for ; Mon, 16 Oct 1995 22:25:19 -0500 Message-Id: <199510170325.WAA05053@vespucci.iquest.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Tue, 17 Oct 1995 00:36:05 -0400 To: sgroup@lotus.uwaterloo.ca From: cornutt@iquest.com (David K. Cornutt) Subject: Re: sgroup NEW RC-100 and DT-100's 4 sale Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO lyk@ucsub.colorado.edu wrote: >what is it actually. the rc-100--> what does it do? does it work for the >S-550? >and the same with the dt-100 digitizer? The RC-100 is a remote control box that works with most of the S-series samplers. I've never seen one on a S-550, but I use one on my S-750, so I can describe what it does with that. The physicals: It's a wedge-shaped box, about a foot wide and 7" front to back (that's about 30 cm x 18 cm). It's on the end of a cord that's about 20' (about 6.5 m) long, so it can be moved away from the sampler a bit. On the S-750, it plugs into the mouse port on the front of the sampler, in place of the mouse. The box has a mouse port on it to make up for this. Basically, it duplicates all the front panel controls on the S-750, except for the volume and record-level knobs. But there's more... it has a 10-key numeric keypad which is extremely useful for entering precise values for, say, sample starting or ending word numbers. (For instance, if you're trying to make a sample of a specific length, and have calculated an ending word number of 176284, it's a lot easier to simply type it in than to try to enter it using the data entry wheel.) It can also be used to enter alpha characters for names and designators (although I find it easier to do it using the on- screen dialog box). The numeric keypad alone was worth the cost. And it has a nicer data-entry wheel. It's larger than the front-panel wheel, and it's not detented. It has a finger hole and is very convenient for jogging a sample back and forth, and such. Note that the function buttons are different depending on what kind of sampler you've got it plugged into. Therefore, it takes panel overlays for different kinds of samplers that have the control legends for that sampler. These overlays usually come with the sampler, so if you don't already have one, you may have to hunt one up. All in all, a very handy gadget. I'm glad I've got mine. Dave - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 17 17:32:38 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-2>; Tue, 17 Oct 1995 17:32:27 -0400 Received: by lotus.uwaterloo.ca id <16>; Tue, 17 Oct 1995 17:19:42 -0400 Received: from uwimona.edu.jm ([196.3.0.2]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 17 Oct 1995 17:18:47 -0400 Received: by uwimona.edu.jm (4.1/SMI-4.1) id AA27901; Tue, 17 Oct 95 16:17:18-050 Date: Tue, 17 Oct 1995 17:17:17 -0400 From: Richard Sven Patterson To: sgroup Subject: sgroup s760 version 2.20 Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hi I just got version 2.20 for the s-760 from Ran Bagno (thanks). I sent it to John at lotus, if you can't wait to get your hands on it, E-mail me and I will send it out to you. richard sven ------------------------------------------------------------------------------ richard sven patterson hounDog music patterso@uwimona.edu.jm "to fight for truth, justice and the analytical way" 809-924-2898 (voice) 809-925-1247 (fax) - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 17 17:58:34 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-1>; Tue, 17 Oct 1995 17:58:24 -0400 Received: by lotus.uwaterloo.ca id <18>; Tue, 17 Oct 1995 17:48:07 -0400 Received: from watdragon.uwaterloo.ca ([129.97.140.24]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 17 Oct 1995 17:47:17 -0400 Received: by watdragon.uwaterloo.ca id <88159-2>; Tue, 17 Oct 1995 17:46:49 -0400 From: "John M. Sellens" To: patterso@uwimona.edu.jm, sgroup@lotus.uwaterloo.ca Subject: Re: sgroup s760 version 2.20 Cc: bagno@NetVision.net.il Message-Id: <95Oct17.174649edt.88159-2@watdragon.uwaterloo.ca> Date: Tue, 17 Oct 1995 17:46:40 -0400 Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO | From lotus.uwaterloo.ca!owner-sgroup Tue Oct 17 17:32:38 1995 | From: Richard Sven Patterson | To: sgroup | Subject: sgroup s760 version 2.20 | Sender: owner-sgroup@lotus.uwaterloo.ca | Precedence: bulk | | Hi I just got version 2.20 for the s-760 from Ran Bagno (thanks). | I sent it to John at lotus, if you can't wait to get your hands on it, | E-mail me and I will send it out to you. | richard sven It's now on lotus.uwaterloo.ca in pub/sgroup/os as the files -rw-r--r-- 1 jmsellens none 1965 Oct 17 17:42 S760220.README -rw-r--r-- 1 jmsellens none 471119 Oct 17 17:41 S760220.SEA Thanks! - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Wed Oct 18 01:35:23 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-1>; Wed, 18 Oct 1995 01:35:18 -0400 Received: by lotus.uwaterloo.ca id <20>; Wed, 18 Oct 1995 01:23:11 -0400 Received: from rata.vuw.ac.nz ([130.195.2.11]) by lotus.uwaterloo.ca with SMTP id <15>; Wed, 18 Oct 1995 01:22:22 -0400 Received: from matai.vuw.ac.nz (matai.vuw.ac.nz [130.195.2.13]) by rata.vuw.ac.nz (8.6.12/8.6.12) with SMTP id SAA20612 for ; Wed, 18 Oct 1995 18:21:50 +1300 Received: from matai.vuw.ac.nz by matai.vuw.ac.nz (MX V4.1 VAX) with SMTP; Wed, 18 Oct 1995 18:21:38 +1200 Date: Wed, 18 Oct 1995 14:21:36 -0400 From: Hamish.Oliver@vuw.ac.nz To: sgroup@lotus.uwaterloo.ca Subject: sgroup Aliasing Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Here's a question: How do you pronounce this word "aliasing"? Is it same as alias (false name), or the other way? Or does it depend where you live? TIA Hamish Oliver - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Wed Oct 18 04:17:15 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-2>; Wed, 18 Oct 1995 04:17:08 -0400 Received: by lotus.uwaterloo.ca id <16>; Wed, 18 Oct 1995 04:03:28 -0400 Received: from enstay2 ([147.250.130.8]) by lotus.uwaterloo.ca with SMTP id <15>; Wed, 18 Oct 1995 04:02:36 -0400 Received: by enstay2 (1.37.109.16/16.2) id AA117313171; Wed, 18 Oct 1995 08:59:31 +0100 From: Alexandre Papadacci Message-Id: <199510180759.AA117313171@enstay2> Subject: sgroup I want to buy a RC100 To: sgroup@lotus.uwaterloo.ca Date: Wed, 18 Oct 1995 03:59:31 -0400 Mailer: Elm [revision: 70.85] Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO \|/ @ @ -----------------------------oOO-(_)-OOo------------------------------ Hi !!! This post is more particularly for Steve Petitt but I seem having problems joining him that's why I post it in the list... Sorry, sorry, sorry..... Steve, please could you mail me ?? I need a RC100 so much.... My flat is so tiny I would to like to use it and store my S750 in a cupboard or something like that.... The problem is that I live in France.... Please mail me.... Alexandre PAPADACCI papadaca@enstay.ensta.fr - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Wed Oct 18 07:54:26 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-3>; Wed, 18 Oct 1995 07:54:12 -0400 Received: by lotus.uwaterloo.ca id <18>; Wed, 18 Oct 1995 07:41:07 -0400 Received: from alsvid.scu.edu.au ([203.2.33.1]) by lotus.uwaterloo.ca with SMTP id <15>; Wed, 18 Oct 1995 07:40:17 -0400 Received: from [203.2.32.23] (sl_host3.scu.edu.au) by alsvid.scu.edu.au with SMTP id AA07945 (5.65c8+/IDA-1.4.4 for ); Wed, 18 Oct 1995 21:39:40 +1000 Date: Wed, 18 Oct 1995 07:39:40 -0400 Message-Id: <199510181139.AA07945@alsvid.scu.edu.au> X-Sender: sberry@pophost.scu.edu.au Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sgroup@lotus.uwaterloo.ca (Roland Samplers) From: sberry@alsvid.scu.edu.au (Steve Berry) Subject: sgroup W-30 Manual alternatives? Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Just wondering if anyone knows of any alternative "how to get the most out of" type publications for the W-30. The manual is a bit tedious at best and as a new user I was hoping it might be possible to save a few headaches. Here's hoping. Steve Berry - Byron Bay NSW Australia. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From math.uwaterloo.ca!lotus.uwaterloo.ca!owner-sgroup Wed Oct 18 13:20:16 1995 Received: from math.uwaterloo.ca ([129.97.140.144]) by watdragon.uwaterloo.ca with SMTP id <88159-2>; Wed, 18 Oct 1995 13:20:07 -0400 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by math.uwaterloo.ca with SMTP id <77267-1>; Wed, 18 Oct 1995 13:19:53 -0400 Received: by lotus.uwaterloo.ca id <23>; Wed, 18 Oct 1995 13:05:38 -0400 Received: from alaska.magpage.com ([204.179.92.50]) by lotus.uwaterloo.ca with SMTP id <15>; Wed, 18 Oct 1995 13:04:49 -0400 Received: from modem010.magpage.com by alaska.magpage.com (5.x/SMI-SVR4) id AA20251; Wed, 18 Oct 1995 13:11:06 -0400 Date: Wed, 18 Oct 1995 13:11:05 -0400 Message-Id: <9510181711.AA20251@alaska.magpage.com> X-Sender: borg@magpage.com X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sberry@alsvid.scu.edu.au (Steve Berry) From: borg@magpage.com Subject: Re: sgroup W-30 Manual alternatives? Cc: sgroup@lotus.uwaterloo.ca Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO >Just wondering if anyone knows of any alternative "how to get the most out >of" type publications for the W-30. The manual is a bit tedious at best >and as a new user I was hoping it might be possible to save a few >headaches. If you want, you can call Roland. I have had some success in figuring how to do certain things by calling them. They can take you step by step in figuring what you want to do.. But they don't have 1-800#.. But I have had a bad incident with them when I tried getting my external hard drive to work.. The problem was that the special $200 chip was not plugged in correctly. No music store in my area knew anything about Roland keyboards, although they all sold them and were "authorized Roland repair places" for Roland. I then called Roland and asked them if they could tell me where the chip was in the board and they wouldn't tell me where because I wasn't an "authorized ROland repair place".. I even told them that no store in my area would touch my keyboard. They still wouldn't help me.. So I called the next day and said I worked at one of the music stores and they believed me!! They told me where the chip was.. And they thought I actually was from an "authorized Roland repair places".. I lied my ass off to them and they didn't even know or care to make sure I was who I said I was!!! After that incident, I hate Roland... Although I still use my W-30, I don't advertise their name.. I covered the Roland logo on the back of the W-30 with black & white checker board contact paper... - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Wed Oct 18 13:51:39 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88184-2>; Wed, 18 Oct 1995 13:51:32 -0400 Received: by lotus.uwaterloo.ca id <24>; Wed, 18 Oct 1995 13:34:50 -0400 Received: from ntiaunix2.ntia.doc.gov ([198.49.199.3]) by lotus.uwaterloo.ca with SMTP id <15>; Wed, 18 Oct 1995 13:34:01 -0400 Received: from ntiaunix2 (localhost) by ntiaunix2.ntia.doc.gov ; 18 OCT 95 13:40:56 EDT Date: Wed, 18 Oct 1995 13:40:56 -0400 From: Steve Harvey X-Sender: sharvey@ntiaunix2 To: sgroup@lotus.uwaterloo.ca Subject: sgroup Rack-mounting hard drives? In-Reply-To: <9510181711.AA20251@alaska.magpage.com> Message-ID: Mime-Version: 1.0 Content-Length: 837 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Okay, this isn't exactly a Roland-specific question, but since it is possibly something some of you have run into, this seemed a good place to ask. I am looking to add a hard disk and/or CD-Rom to my S-760, and want to rack-mount them so I can stick everything in one compact place and be done with it. I have been told by several people that there exist rack-mount case & power supply assemblies for drives, but have searched far and wide to no avail. The closest I have come is generic rack shelving, which I thought I might be able to bolt a regular case & power supply to, though I have not actually tried this. Can anyone give me any pointers as how to accomplish this? -Steve -- sharvey@ntiaunix2.ntia.doc.gov http://www.wam.umd.edu/~dwallace "I am Hello Kitty, Destroyer of Worlds" -Deth Vegetable - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Wed Oct 18 14:23:08 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-1>; Wed, 18 Oct 1995 14:22:58 -0400 Received: by lotus.uwaterloo.ca id <26>; Wed, 18 Oct 1995 14:06:25 -0400 Received: from light.lightlink.com ([205.232.34.1]) by lotus.uwaterloo.ca with SMTP id <15>; Wed, 18 Oct 1995 14:05:13 -0400 Received: from [205.232.34.114] (port14.lightlink.com [205.232.34.114]) by light.lightlink.com (8.6.12/8.6.12) with SMTP id OAA12888 for ; Wed, 18 Oct 1995 14:04:58 -0400 X-Sender: doug@light.lightlink.com Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Wed, 18 Oct 1995 14:04:37 -0400 To: sgroup@lotus.uwaterloo.ca From: doug@lightlink.com (Doug Wyatt) Subject: Re: sgroup Rack-mounting hard drives? Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO At 13:40 10/18/95, Steve Harvey wrote: > Okay, this isn't exactly a Roland-specific question, but since it is > possibly something some of you have run into, this seemed a good place to > ask. > I am looking to add a hard disk and/or CD-Rom to my S-760, and want to > rack-mount them so I can stick everything in one compact place and be > done with it. I have been told by several people that there exist > rack-mount case & power supply assemblies for drives, but have searched > far and wide to no avail. The closest I have come is generic rack > shelving, which I thought I might be able to bolt a regular case & power > supply to, though I have not actually tried this. > Can anyone give me any pointers as how to accomplish this? Glyph Technologies built me a custom 2-rack-space unit with a hard disk & CD-ROM. They have dealers (Sam Ash's computer room features a Glyph enclosure at every workstation), but if your favorite dealer doesn't carry their line you can call them at 607-275-0345. Doug --- Doug Wyatt programmer, Opcode Systems Inc. doug@opcode.com http://www.lightlink.com/doug "It is a miracle that curiosity survives formal education." - Albert Einstein - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From math.uwaterloo.ca!lotus.uwaterloo.ca!owner-sgroup Wed Oct 18 21:28:31 1995 Received: from math.uwaterloo.ca ([129.97.140.144]) by watdragon.uwaterloo.ca with SMTP id <88184-1>; Wed, 18 Oct 1995 21:28:24 -0400 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by math.uwaterloo.ca with SMTP id <77163-3>; Wed, 18 Oct 1995 21:28:17 -0400 Received: by lotus.uwaterloo.ca id <16>; Wed, 18 Oct 1995 21:18:02 -0400 Received: from xs1.xs4all.nl ([193.78.33.42]) by lotus.uwaterloo.ca with SMTP id <15>; Wed, 18 Oct 1995 21:17:12 -0400 Received: from xs4all.xs4all.nl (asd04-19.dial.xs4all.nl) by xs1.xs4all.nl with SMTP id AA11464 (5.67b/IDA-1.5 for ); Thu, 19 Oct 1995 02:16:59 +0100 Date: Wed, 18 Oct 1995 21:16:59 -0400 Message-Id: <199510190116.AA11464@xs1.xs4all.nl> X-Sender: ito@dds.nl X-Mailer: Windows Eudora Light Version 1.5.2 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sgroup@lotus.uwaterloo.ca From: "S.R. van Roekel" Subject: sgroup Cd-rom for s700-series pc-compatible? Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Can I read s700-series cdroms on my pc with my cdrom-drive? S.R.van Roekel < > Amsterdam,Holland,Earth +31 20 6188874 - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 19 21:10:05 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-3>; Thu, 19 Oct 1995 21:09:57 -0400 Received: by lotus.uwaterloo.ca id <16>; Thu, 19 Oct 1995 20:59:06 -0400 Received: from vespucci.iquest.com ([199.170.120.42]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 19 Oct 1995 20:58:14 -0400 Received: from [204.177.193.138] (cornutt.iquest.com [204.177.193.138]) by vespucci.iquest.com (8.6.9/8.6.9 Secure) with SMTP id TAA14512 for ; Thu, 19 Oct 1995 19:57:55 -0500 Message-Id: <199510200057.TAA14512@vespucci.iquest.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Thu, 19 Oct 1995 22:08:48 -0400 To: sgroup@lotus.uwaterloo.ca From: cornutt@iquest.com (David K. Cornutt) Subject: Re: sgroup Aliasing Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO >Here's a question: >How do you pronounce this word "aliasing"? Is it same as alias (false >name), or the other way? Or does it depend where you live? Hmmm... I've always pronounced it "ALE-e-us-ing". Since it does derive from the root word "alias" (other name, or false name as you say), I think this is correct. I've never heard anyone pronounce it "uh-LIE-us-ing", if that's what you meant. Dave - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 19 21:26:36 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-2>; Thu, 19 Oct 1995 21:26:24 -0400 Received: by lotus.uwaterloo.ca id <18>; Thu, 19 Oct 1995 21:11:16 -0400 Received: from math.uwaterloo.ca ([129.97.140.144]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 19 Oct 1995 21:09:50 -0400 Received: from vespucci.iquest.com ([199.170.120.42]) by math.uwaterloo.ca with SMTP id <77148-2>; Thu, 19 Oct 1995 21:03:11 -0400 Received: from [204.177.193.138] (cornutt.iquest.com [204.177.193.138]) by vespucci.iquest.com (8.6.9/8.6.9 Secure) with SMTP id TAA14491 for ; Thu, 19 Oct 1995 19:57:35 -0500 Message-Id: <199510200057.TAA14491@vespucci.iquest.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Thu, 19 Oct 1995 22:08:38 -0400 To: sgroup@lotus.uwaterloo.ca From: cornutt@iquest.com (David K. Cornutt) Subject: Re: sgroup NEW RC-100 and DT-100's 4 sale Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO >I wonder if it works for the S-550. cause i got one, but i don't have a >mouse for it. Although it does use one. How much was it again? >and how much are you getting it for? It works just fine without the mouse. (In fact, when I'm trying to use it in my lap, I usually don't bother with the mouse.) I wasn't the one selling it, so I can't help you there. Dave - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 23 13:42:16 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-1>; Mon, 23 Oct 1995 13:42:13 -0400 Received: by lotus.uwaterloo.ca id <16>; Mon, 23 Oct 1995 13:26:24 -0400 Received: from huey.disney.com ([204.128.192.10]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 23 Oct 1995 13:25:34 -0400 Received: from cc.wdi.disney.com by huey.disney.com (SMI-8.6/SMI-SVR4) id KAA27707; Mon, 23 Oct 1995 10:23:48 -0700 From: Steve_Petitt@cc.wdi.disney.com Received: from cc:Mail by cc.wdi.disney.com id AA814467883; Mon, 23 Oct 95 09:52:01 pst Date: Mon, 23 Oct 1995 13:52:01 -0400 Message-Id: <9509238144.AA814467883@cc.wdi.disney.com> To: sgroup@lotus.uwaterloo.ca Subject: sgroup RC-100/DT-100 shipping info Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO If you are planning on ordering either (or both) of these items, please note thatI can only ship c.o.d. to U.S. cities ONLY.According to my local post office it is NOT POSSIBLE to ship ANYTHING c.o.d. to a foreign country.Therefore, if you are not in the U.S., you will need to send payment (plus shipping), before I can send these to you. Sorry, but it's not my rule, it's Big Brother's! Please Email to spetitt@genie.geis.com if possible. This Email is being sent from my office here @Disney.Thanks Steve Petitt - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 23 14:01:29 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-3>; Mon, 23 Oct 1995 14:01:23 -0400 Received: by lotus.uwaterloo.ca id <18>; Mon, 23 Oct 1995 13:50:42 -0400 Received: from itata.disca.utfsm.cl ([200.1.21.35]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 23 Oct 1995 13:49:51 -0400 Received: from ([146.83.198.40]) by itata.disca.utfsm.cl (8.6.9/8.6.9) with SMTP id OAA00678 for ; Mon, 23 Oct 1995 14:52:42 GMT Date: Mon, 23 Oct 1995 10:52:42 -0400 Message-Id: <199510231452.OAA00678@itata.disca.utfsm.cl> X-Sender: fsound@itata.disca.utfsm.cl Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sgroup@lotus.uwaterloo.ca From: fsound@disca.utfsm.cl (Marcelo Aravena) Subject: sgroup RC-100/DT-100 info wanted. X-Mailer: Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hi !! There is a way to attach this to a Roland DJ-70 sampler ? Bye. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 23 18:51:42 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-3>; Mon, 23 Oct 1995 18:51:32 -0400 Received: by lotus.uwaterloo.ca id <20>; Mon, 23 Oct 1995 18:42:10 -0400 Received: from fullfeed.msn.fullfeed.com ([199.184.182.42]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 23 Oct 1995 18:41:35 -0400 Received: from jimw@fullfeed.com by fullfeed.msn.fullfeed.com (8.6.9/FF-1.1) id RAA02901; Mon, 23 Oct 1995 17:41:16 -0500 Date: Mon, 23 Oct 1995 18:41:16 -0400 Message-Id: <199510232241.RAA02901@fullfeed.msn.fullfeed.com> X-Sender: jimw@pop.fullfeed.com X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sgroup@lotus.uwaterloo.ca From: jimw@msn.fullfeed.com (Jim Wohlgemuth) Subject: sgroup dart.binhex.z ?? Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hi, anyone know what the ".Z" is at the end of this S-group utility file? I'd really like to load this DART program on my Mac but can't quite figure out what decompressor(s) to use or where to get them... about the only info I have on the .Z extension is from the NETSCAPE helper application menu where it refers to .Z as being "X-compress"... I imagine this is a two part extraction on this file.. first the X-decompress then the unbinhex part?? Gee, I would like to use the new S-760 system.. SCSI dump... ooohhh ahhhh. Jim Wohlgemuth Alltron Vintage Disks http://www.msn.fullfeed.com/planetz pardeeville.wisconsin.usa tel: 608-429-2355 - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 23 20:26:53 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-3>; Mon, 23 Oct 1995 20:26:49 -0400 Received: by lotus.uwaterloo.ca id <23>; Mon, 23 Oct 1995 20:17:35 -0400 Received: from isgate.is ([193.4.58.51]) by lotus.uwaterloo.ca with SMTP id <15>; Mon, 23 Oct 1995 20:16:44 -0400 Received: from folda.ismennt.is by isgate.is (8.6.10/ISnet/14-10-91); Tue, 24 Oct 1995 00:14:57 GMT Received: from rvik.ismennt.is by folda.ismennt.is (8.6.12/ISnet/11-02-92); Tue, 24 Oct 1995 00:14:34 GMT Received: by rvik.ismennt.is (8.6.12/ISnet/11-02-92); Tue, 24 Oct 1995 00:15:43 GMT From: rhf@ismennt.is (Rikhardur H Fridriksson) Message-Id: <199510240015.AAA05693@rvik.ismennt.is> Subject: Re: sgroup dart.binhex.z ?? To: jimw@msn.fullfeed.com (Jim Wohlgemuth) Date: Mon, 23 Oct 1995 20:15:43 -0400 Cc: sgroup@lotus.uwaterloo.ca In-Reply-To: <199510232241.RAA02901@fullfeed.msn.fullfeed.com> from "Jim Wohlgemuth" at Oct 23, 95 06:41:16 pm X-Mailer: ELM [version 2.4 PL23] MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Content-Length: 733 Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hello, >Hi, anyone know what the ".Z" is at the end of this S-group utility file? >I'd really like to load this DART program on my Mac but can't quite figure >out what decompressor(s) to use or where to get them... The ".Z" suffix stands for Unix-compress, a program included in most or all Unix systems. This means if you have a shell account you can just type: "uncompress " at the unix prompt, and up pops an uncompressed version, a binhex file in this case. If you are getting this directly to your Mac, you will need either StuffIt Expander with the "Expander Enhancer" or a program called MacCompress. Both will expand your file effortlessly. Rikhardur H. Fridriksson rhf@ismennt.is http://rvik.ismennt.is/~rhf/ - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 24 04:30:04 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-3>; Tue, 24 Oct 1995 04:29:56 -0400 Received: by lotus.uwaterloo.ca id <24>; Tue, 24 Oct 1995 04:15:53 -0400 Received: from enstay2 ([147.250.130.8]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 24 Oct 1995 04:15:00 -0400 Received: by enstay2 (1.37.109.16/16.2) id AA176122338; Tue, 24 Oct 1995 09:12:18 +0100 From: Alexandre Papadacci Message-Id: <199510240812.AA176122338@enstay2> Subject: sgroup Steve Petitt wherever you are... ANSWER !!!, wherever you are, PLEASE ANSWER !!!! To: sgroup@lotus.uwaterloo.ca Date: Tue, 24 Oct 1995 04:12:17 -0400 Mailer: Elm [revision: 70.85] Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO \|/ @ @ -----------------------------oOO-(_)-OOo------------------------------ Hi everyone in the list.... I am sorry to post this in the list but I can't join Steve Petitt from whom I want to buy a RC100.... Was someone in the list able to contact him directly ???? Hi Steve, who are you, where are you ?? It is very nice to propose us RC100s or DT100s but could you please answer the people who are interested ????? I couldn't join you neither at pongo@wavenet.com nor at spetitt@genie.geis.com nor at steve_petitt@cc.wdi.disney.com Or maybe you didn't want to answer....So if you don't want to answer just send a I WON'T ANSWER mail... I won't spend my days sending mails to 3 different addresses that don't seem to receive anything.... My e-mail is papadaca@enstay.ensta.fr and if it doesn't seem to work please mail me thru the list..... Please Please Please show me that you are somewhere and that you can hear me... I need a RC100 and I couldn't find one in France.... You are my last chance.... (this sounds more and more like a desperate love mail doesn't it ???) Thanks in advance...... Alexandre Alexandre PAPADACCI papadaca@enstay.ensta.fr - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 24 05:01:57 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-2>; Tue, 24 Oct 1995 05:01:46 -0400 Received: by lotus.uwaterloo.ca id <26>; Tue, 24 Oct 1995 04:48:08 -0400 Received: from enstay2 ([147.250.130.8]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 24 Oct 1995 04:47:18 -0400 Received: by enstay2 (1.37.109.16/16.2) id AA176984158; Tue, 24 Oct 1995 09:42:38 +0100 From: Alexandre Papadacci Message-Id: <199510240842.AA176984158@enstay2> Subject: sgroup Test To: sgroup@lotus.uwaterloo.ca Date: Tue, 24 Oct 1995 04:42:38 -0400 Mailer: Elm [revision: 70.85] Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 24 07:37:35 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-3>; Tue, 24 Oct 1995 07:37:31 -0400 Received: by lotus.uwaterloo.ca id <28>; Tue, 24 Oct 1995 07:24:40 -0400 Received: from opal.spawar.navy.mil ([192.26.7.3]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 24 Oct 1995 07:23:50 -0400 Received: from smtp-gw.spawar.navy.mil by opal.spawar.navy.mil (4.1/SMI-4.1) id AA27254; Tue, 24 Oct 95 07:20:29 EDT Received: from cc:Mail by smtp-gw.spawar.navy.mil id AA814544367; Tue, 24 Oct 95 07:15:49 EST Date: Tue, 24 Oct 1995 08:15:49 -0400 From: ramsayd@smtp-gw.spawar.navy.mil Encoding: 55 Text Message-Id: <9509248145.AA814544367@smtp-gw.spawar.navy.mil> To: sgroup@lotus.uwaterloo.ca, jimw@msn.fullfeed.com (Jim Wohlgemuth) Subject: Re: sgroup dart.binhex.z ?? Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Jim, I use MacCompress to decompress .Z (Unix compressed) files. It was worked great for me - anyone know of any others? Doug ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "Never look down on a man unless you're willing to pick him up..." ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ================================================================== / `-' / ,,, |[====|||||||||||[:::} My type of "g-strings" \__.-._\ ``` >>>>>>>> Acknowledge Him Productions <<<<<<<< Mitchellville, MD (301) 499.7271 (vox) (703) 807.8639 (pager) ================================================================== ______________________________ Reply Separator _________________________________ Subject: sgroup dart.binhex.z ?? Author: jimw@msn.fullfeed.com (Jim Wohlgemuth) at smtp-gw Date: 10/23/95 7:05 PM Hi, anyone know what the ".Z" is at the end of this S-group utility file? I'd really like to load this DART program on my Mac but can't quite figure out what decompressor(s) to use or where to get them... about the only info I have on the .Z extension is from the NETSCAPE helper application menu where it refers to .Z as being "X-compress"... I imagine this is a two part extraction on this file.. first the X-decompress then the unbinhex part?? Gee, I would like to use the new S-760 system.. SCSI dump... ooohhh ahhhh. Jim Wohlgemuth Alltron Vintage Disks http://www.msn.fullfeed.com/planetz pardeeville.wisconsin.usa tel: 608-429-2355 - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 24 08:41:27 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-3>; Tue, 24 Oct 1995 08:41:20 -0400 Received: by lotus.uwaterloo.ca id <39>; Tue, 24 Oct 1995 08:25:02 -0400 Received: from fullfeed.msn.fullfeed.com ([199.184.182.42]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 24 Oct 1995 08:24:27 -0400 Received: from F181-082.net.wisc.edu by fullfeed.msn.fullfeed.com (8.6.9/FF-1.1) id HAA15072; Tue, 24 Oct 1995 07:24:16 -0500 Date: Tue, 24 Oct 1995 08:24:16 -0400 Message-Id: <199510241224.HAA15072@fullfeed.msn.fullfeed.com> X-Sender: jimw@pop.fullfeed.com (Unverified) X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sgroup@lotus.uwaterloo.ca From: jimw@msn.fullfeed.com (Jim Wohlgemuth) Subject: sgroup Re: sdk file Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO >To: Nic Grant >From: jimw@msn.fullfeed.com (Jim Wohlgemuth) >Subject: Re: sdk file >Cc: sgroup >Bcc: >X-Attachments: > >>the s series. I just tried to download it to see if I could find the >>problem, but it looks like the file has been taken off the site. > >I didn't know this! >Have had many probs with my provider.. and that FTP incoming generic site I use there has NO support. I can't delete a file or rename it.. they don't answer my phone calls or emails about setting up my own anonymous site etc. The web server only encodes files ending in .exe as binary files... on and on.. > >Sorry.. > >I tried uploading the file to your FTP site but got a "permission denied" message.. >I did get into the subdirectory and saw the 3 or so files there. Seemed I neededto set to L8 to get in and then I tried both L8 and Binary modes when trying to PUT a file. ?? > >I did rePUT the file (at least for a week ot two!?&*!) at my servers generic incoming site: ftp.msn.fullfeed.com/incoming/550sdk.exe ... it uploaded as 760K or so.. so it should be fine. Last week I downloaded its predecessor and used you program to convert it back to a sampler image and then tried it on the 550 and it was ok. The probs have been the confusion of the many different _seemingly_ 550 disks on the FTP site. If I use the dial in line they gave me the system hangs after uploading a bit, then I can't get in and delete or rename the file. So I have to borrow a freinds dialup and FTP to MY server. geesh! I readjusted the web site to see the new _good_ file so that should work. > >Sorry about having people think your program is'nt happening.. I'm looking into a site for FTP purposes only. I'd only have about 10 megs of files there eventually. >I don't know if its proper to have them on the lotus.uwaterloo site as its a quasi commercial basis.. (at $7.50 US a disk) But the demo disks do have usable material on them and I plan on putting a few more out there.. they just dont have big multisamples and the drum kits have about a third of the sounds. It will be nice to have the web page point to a permanent site with an FTP dir that is well laid out and can be adjusted with "proper" names and extensions. > >... > >Thanks for your help Nic, any suggestions would be appreciated... > > > > > > Jim Wohlgemuth Alltron Vintage Disks http://www.msn.fullfeed.com/planetz pardeeville.wisconsin.usa tel: 608-429-2355 - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 24 08:59:07 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-1>; Tue, 24 Oct 1995 08:58:56 -0400 Received: by lotus.uwaterloo.ca id <111>; Tue, 24 Oct 1995 08:42:47 -0400 Received: from fullfeed.msn.fullfeed.com ([199.184.182.42]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 24 Oct 1995 08:41:09 -0400 Received: from F181-082.net.wisc.edu by fullfeed.msn.fullfeed.com (8.6.9/FF-1.1) id HAA14988; Tue, 24 Oct 1995 07:23:08 -0500 Date: Tue, 24 Oct 1995 08:23:08 -0400 Message-Id: <199510241223.HAA14988@fullfeed.msn.fullfeed.com> X-Sender: jimw@pop.fullfeed.com (Unverified) X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: Nic Grant From: jimw@msn.fullfeed.com (Jim Wohlgemuth) Subject: sgroup Re: sdk file Cc: sgroup@lotus.uwaterloo.ca Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO >the s series. I just tried to download it to see if I could find the >problem, but it looks like the file has been taken off the site. I didn't know this! Have had many probs with my provider.. and that FTP incoming generic site I use there has NO support. I can't delete a file or rename it.. they don't answer my phone calls or emails about setting up my own anonymous site etc. The web server only encodes files ending in .exe as binary files... on and on.. Sorry.. I tried uploading the file to your FTP site but got a "permission denied" message.. I did get into the subdirectory and saw the 3 or so files there. Seemed I neededto set to L8 to get in and then I tried both L8 and Binary modes when trying to PUT a file. ?? I did rePUT the file (at least for a week ot two!?&*!) at my servers generic incoming site: ftp.msn.fullfeed.com/incoming/550sdk.exe ... it uploaded as 760K or so.. so it should be fine. Last week I downloaded its predecessor and used you program to convert it back to a sampler image and then tried it on the 550 and it was ok. The probs have been the confusion of the many different _seemingly_ 550 disks on the FTP site. If I use the dial in line they gave me the system hangs after uploading a bit, then I can't get in and delete or rename the file. So I have to borrow a freinds dialup and FTP to MY server. geesh! I readjusted the web site to see the new _good_ file so that should work. Sorry about having people think your program is'nt happening.. I'm looking into a site for FTP purposes only. I'd only have about 10 megs of files there eventually. I don't know if its proper to have them on the lotus.uwaterloo site as its a quasi commercial basis.. (at $7.50 US a disk) But the demo disks do have usable material on them and I plan on putting a few more out there.. they just dont have big multisamples and the drum kits have about a third of the sounds. It will be nice to have the web page point to a permanent site with an FTP dir that is well laid out and can be adjusted with "proper" names and extensions. ... Thanks for your help Nic, any suggestions would be appreciated... Jim Wohlgemuth Alltron Vintage Disks http://www.msn.fullfeed.com/planetz pardeeville.wisconsin.usa tel: 608-429-2355 - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 24 10:29:34 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-1>; Tue, 24 Oct 1995 10:29:21 -0400 Received: by lotus.uwaterloo.ca id <67>; Tue, 24 Oct 1995 10:12:39 -0400 Received: from ntiaunix2.ntia.doc.gov ([198.49.199.3]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 24 Oct 1995 10:11:48 -0400 Received: from ntiaunix2 (localhost) by ntiaunix2.ntia.doc.gov ; 24 OCT 95 10:19:04 EDT Date: Tue, 24 Oct 1995 10:19:04 -0400 From: Steve Harvey X-Sender: sharvey@ntiaunix2 To: sgroup@lotus.uwaterloo.ca Subject: Re: sgroup dart.binhex.z ?? In-Reply-To: <199510232241.RAA02901@fullfeed.msn.fullfeed.com> Message-ID: Mime-Version: 1.0 Content-Length: 1041 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO On Mon, 23 Oct 1995, Jim Wohlgemuth wrote: > Hi, anyone know what the ".Z" is at the end of this S-group utility file? > I'd really like to load this DART program on my Mac but can't quite figure > out what decompressor(s) to use or where to get them... about the only > info I have on the .Z extension is from the NETSCAPE helper application menu > where it refers to .Z as being "X-compress"... > > I imagine this is a two part extraction on this file.. first the > X-decompress then the unbinhex part?? The .Z can be uncompressed with the unix uncompress command (i.e. 'uncompress filename'... Take heed that .Z and .z are two different schemes though (.z is generally gnu zip aka gzip...) While we're discussing compression schemes, does anyone know of a way to un-binhex stuff on a dos box? I too would like to get the new s-760 OS but I don't have easy access to a mac. -Steve -- sharvey@ntiaunix2.ntia.doc.gov http://www.wam.umd.edu/~dwallace "I am Hello Kitty, Destroyer of Worlds" -Deth Vegetable - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 24 12:41:47 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-2>; Tue, 24 Oct 1995 12:41:42 -0400 Received: by lotus.uwaterloo.ca id <114>; Tue, 24 Oct 1995 12:28:30 -0400 Received: from math.uwaterloo.ca ([129.97.140.144]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 24 Oct 1995 12:27:22 -0400 Received: from uswat.advtech.uswest.com ([130.13.16.1]) by math.uwaterloo.ca with SMTP id <77266-3>; Tue, 24 Oct 1995 12:27:11 -0400 Received: from lookout.ecte.uswc.uswest.com (lookout.ecte.uswc.uswest.com [151.116.109.7]) by uswat.advtech.uswest.com (8.7/8.6.12) with ESMTP id KAA14996 for ; Tue, 24 Oct 1995 10:21:48 -0600 (MDT) Received: from shaker.ecte.uswc.uswest.com (shaker.ecte.uswc.uswest.com [151.116.35.190]) by lookout.ecte.uswc.uswest.com (8.6.11/uswc-hub.950320) with SMTP id KAA02188 for ; Tue, 24 Oct 1995 10:22:13 -0600 Received: by shaker.ecte.uswc.uswest.com (5.x/uswc-solaris-server.950106) id AA12949 for sgroup@lotus.uwaterloo.ca; Tue, 24 Oct 1995 10:22:59 -0600 Date: Tue, 24 Oct 1995 12:22:59 -0400 From: Keith Lewis Message-Id: <9510241622.AA12949@shaker.ecte.uswc.uswest.com> To: sgroup@lotus.uwaterloo.ca Subject: sgroup Where's the S-50 disks? Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hi sgroupers, Does anyone know where the S-50 libraries are?. I can see all the S-550 disk images at the sgroup ftp site, but I can't seem to find any of the S-50 disks. Where did they go? In particular I was looking for the tone wheel organ disk, I think it's rsb-503-7. Thanks, Keith - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Wed Oct 25 15:22:53 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88201-2>; Wed, 25 Oct 1995 15:22:45 -0400 Received: by lotus.uwaterloo.ca id <136>; Wed, 25 Oct 1995 15:03:46 -0400 Received: from wavenet.com ([198.147.118.131]) by lotus.uwaterloo.ca with SMTP id <15>; Wed, 25 Oct 1995 15:02:54 -0400 Received: from port29.wavenet.com (port29.wavenet.com [198.147.118.222]) by wavenet.com (8.6.12/8.6.9) with SMTP id MAA05531 for ; Wed, 25 Oct 1995 12:13:26 -0700 Date: Wed, 25 Oct 1995 15:13:26 -0400 Message-Id: <199510251913.MAA05531@wavenet.com> X-Sender: pongo@wavenet.com X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" From: To: sgroup@lotus.uwaterloo.ca Illegal-Object: Syntax error in From: address found on lotus.uwaterloo.ca: From: @wavenet.com ^-illegal special character in phrase Subject: sgroup I'm not ignoring you!! Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I recently posted an ad to sell the RC-100 and DT-100's here @ sgroup.I changed internet providers, but forgot to change the mailserver setup in my NEW account. I just changed it TODAY, and found all of your messages. I've responded to them, and I apologize for my delay.BTW, I only have 2 RC-100's and about 10 DT-100's left. Steve - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From math.uwaterloo.ca!lotus.uwaterloo.ca!owner-sgroup Thu Oct 26 20:18:04 1995 Received: from math.uwaterloo.ca ([129.97.140.144]) by watdragon.uwaterloo.ca with SMTP id <88188-3>; Thu, 26 Oct 1995 20:18:01 -0400 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by math.uwaterloo.ca with SMTP id <77508-2>; Thu, 26 Oct 1995 20:17:51 -0400 Received: by lotus.uwaterloo.ca id <16>; Thu, 26 Oct 1995 19:59:13 -0400 Received: from hp1.online.apple.com ([192.215.65.17]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 26 Oct 1995 19:58:23 -0400 Received: by hp1.online.apple.com (8.6.12/8.6.12) id QAA03655 for sgroup@lotus.uwaterloo.ca; Thu, 26 Oct 1995 16:58:18 -0700 Date: Thu, 26 Oct 1995 19:58:18 -0400 From: ColinWebber@eworld.com Message-ID: <951026165815_17291454@hp1.online.apple.com> To: sgroup@lotus.uwaterloo.ca Subject: sgroup Lots of questions Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Being new to this group, I have a few questions which have most likely been answered in the past, but... 1. Apparently the only front panel reset for the S-760 is by pressing the "mode" button on start-up. My machine has just locked up and this doesn't work. Does anyone know of any other reset? 2. Is there a utility for Macintosh to allow reading of Roland format hard drives for the purposes of back up. In fact any disk utilities would be great. I had a crash on my 270 meg Syquest and no way to access the data. 3. I have seen system upgrades posted on your archive. How do I transfer them to the S760 from my Mac? Much appreciation for any assistance Colin. "Isn't technology wonderful - when it works!" - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Thu Oct 26 22:54:38 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88184-1>; Thu, 26 Oct 1995 22:54:27 -0400 Received: by lotus.uwaterloo.ca id <18>; Thu, 26 Oct 1995 22:41:31 -0400 Received: from emout06.mail.aol.com ([198.81.10.43]) by lotus.uwaterloo.ca with SMTP id <15>; Thu, 26 Oct 1995 22:40:41 -0400 Received: by emout06.mail.aol.com (8.6.12/8.6.12) id WAA08244 for sgroup@lotus.uwaterloo.ca; Thu, 26 Oct 1995 22:40:20 -0400 Date: Thu, 26 Oct 1995 22:40:20 -0400 From: SBogle56@aol.com Message-ID: <951026224020_55569439@emout06.mail.aol.com> To: sgroup@lotus.uwaterloo.ca Subject: sgroup S760/syquest270 hell-TOO!!/Listen Delete; loops lag. Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I too have had many problems with the syquest 270 removable connected to my S760. "Medium error" messages when loading, problems formatting, & cartridges getting confused, loading samples other than the one's marked. It's been a real nightmare; "IMPORTANT" projects (Performances) custom tweaked to perfection----Sorry/No LOADy!----must recreate from scratch. From what I've seen of the ZIP drives, I'm really curious about the JAZ. Does anyone know where I can get one, NOW? This troubled little syquest 270 of mine is a GLYPH, by the way. P.S. - Hey ROLAND guys/girlz & 760 users----I have been having a problem with my 760. Drum & other loops start lagging & sounding sloppy - only after LISTEN DELETE. Manually deleting the unwanted sounds by hand is the only way to get the loops to behave. And yes the sequence firing the loops is perfect to the pulse. Feedback welcome-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- _-_-_-_-_-_- - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Fri Oct 27 03:54:07 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88184-2>; Fri, 27 Oct 1995 03:54:00 -0400 Received: by lotus.uwaterloo.ca id <20>; Fri, 27 Oct 1995 03:40:29 -0400 Received: from mail.eskimo.com ([204.122.16.4]) by lotus.uwaterloo.ca with SMTP id <15>; Fri, 27 Oct 1995 03:39:38 -0400 Received: from eskimo.com (mercury@eskimo.com [204.122.16.13]) by mail.eskimo.com (8.6.12/8.6.12) with SMTP id AAA01328 for ; Fri, 27 Oct 1995 00:39:26 -0700 Date: Fri, 27 Oct 1995 03:39:25 -0400 From: mercury@eskimo.com To: Sgroup@lotus.uwaterloo.ca Subject: sgroup ZIP drivesZ In-Reply-To: <951026224020_55569439@emout06.mail.aol.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO On Thu, 26 Oct 1995 SBogle56@aol.com wrote: > From what I've seen of the ZIP drives, I'm really curious about the > JAZ. Does anyone know where I can get one, NOW? > If you're talking about IOmega ZIP drives, I just bought one a couple months ago and I love it! I got mine through PC Connection: (800) 998-0037 Don't know if that number works in canada. If anyone needs a number outside the US let me know--I'll find one. You'll have your ZIP drive within two days of ordering it. It's a great piece. Satauna mercury@eskimo.com > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > P.S. > - Hey ROLAND guys/girlz & 760 users----I have been having a problem with my > 760. Drum & other loops start lagging & sounding sloppy - only after LISTEN > DELETE. Manually deleting the unwanted sounds by hand is the only way to get > the loops to behave. And yes the sequence firing the loops is perfect to the > pulse. Feedback > welcome-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- > _-_-_-_-_-_- > > - > Sent by the sgroup mailing list on lotus.uwaterloo.ca > For subscription information, send mail to majordomo@lotus.uwaterloo.ca > - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Fri Oct 27 11:01:01 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88198-1>; Fri, 27 Oct 1995 11:00:53 -0400 Received: by lotus.uwaterloo.ca id <15>; Fri, 27 Oct 1995 10:43:56 -0400 Received: from fullfeed.msn.fullfeed.com ([199.184.182.42]) by lotus.uwaterloo.ca with SMTP id <23>; Fri, 27 Oct 1995 10:28:51 -0400 Received: from [199.184.183.88] by fullfeed.msn.fullfeed.com (8.6.9/FF-1.1) id JAA08355; Fri, 27 Oct 1995 09:28:08 -0500 Message-Id: <199510271428.JAA08355@fullfeed.msn.fullfeed.com> X-Sender: jimw@pop.fullfeed.com (Unverified) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Fri, 27 Oct 1995 11:49:26 -0400 To: sgroup@lotus.uwaterloo.ca From: jimw@msn.fullfeed.com (Jim Wohlgemuth) Subject: sgroup Success! (S-760 2.20) Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO After almost a two week learning curve I finally have the X-compressed and Binhexed and DART formatted (phew!) image of system 2.20 for the S-760 residing and working on my sampler. Oh, I forgot .sit'd as well.. The next message is a doc that was hidden in the "bundle". It basically says Soundforge doesnt yet support the SCSI dump from the S-760 but will shortly. Recycle (mac) and one other do however (support the 760 for SCSI dump) There are a number of programs I used to get this file S760_220.bhx.Z to decompress... Only for Mac heads however. Get the latest.. Stuffit Expander 3.5 Dropstuff with Expander Enhancer (this is one program) 3.5 These programs caome as "Installer" executables which then add some hidden stuff for all kinds of file extensions including the famed .Z X-Compress UNIX thingie. Its a System 7 Drag n Drop right onto the "Stuffit Expander" Icon. Then watch in amazement as this converter goes thru 3 or more levels of decompression and decoding _all by itself!_. Welll you think your done... nope. Gotta do the DART thing next. I noticed that the DART program is a genuine APPLE utility but that the vers at Uwaterloo was a version from 1990 and lacked documentaion and other stuff. Get the latest including all the bells and whistles at: http://freedom.wit.com/mirrors/mac/disk/dart-153.hqx disregard the big manual (which you'll need to change the creator to a teachtext as the extg creator is unknown) On the left hand side of the screen choose DART file then choose from the selector your fully decomopressed and decoded DART 760 image. You'll then see a green light and ready plus some info about your source file.. put a disk even unformattet I belive (although mine was S-760 preformatted) into your drive and the right hand ready lihgt comes on. Then press the go button and watch in amazement as this program goes thru three processes.. READ WRITE and VERIFY.. gee whiz.. suprised it worked after all this. In the next week or so I'll try to get this up on Uwaterloo in a somewhat more edible version.. .SDK for the IBMers and SMAC for the MACers. Jim - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Fri Oct 27 11:19:13 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-1>; Fri, 27 Oct 1995 11:19:09 -0400 Received: by lotus.uwaterloo.ca id <28>; Fri, 27 Oct 1995 11:01:54 -0400 Received: from xs1.xs4all.nl ([193.78.33.42]) by lotus.uwaterloo.ca with SMTP id <23>; Fri, 27 Oct 1995 11:00:47 -0400 Received: from xs4all.xs4all.nl (asd04-16.dial.xs4all.nl) by xs1.xs4all.nl with SMTP id AA21221 (5.67b/IDA-1.5 for ); Fri, 27 Oct 1995 15:40:03 +0100 Date: Fri, 27 Oct 1995 10:40:03 -0400 Message-Id: <199510271440.AA21221@xs1.xs4all.nl> X-Sender: ito@dds.nl X-Mailer: Windows Eudora Light Version 1.5.2 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sgroup@lotus.uwaterloo.ca From: "S.R. van Roekel" Subject: sgroup Sample dump standard Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I want to extend the capabilities of my Dj70 by using a program to send/receive samples to/from my pc. And then edit them on my pc. -what's a very good program to send/receive samples with my pc (in windows)? -what's the best program to edit and add effects to those files? thanks in advance, S.R.van Roekel "Ik wordt nooit gedist, maar hij wordt nooit gedister," < > "Ik ben een componist, maar hij is componister." Amsterdam,Holland -Mozart +31 20 6188874 e-mail: ito@dds.nl - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Fri Oct 27 17:57:07 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88184-2>; Fri, 27 Oct 1995 17:57:01 -0400 Received: by lotus.uwaterloo.ca id <26>; Fri, 27 Oct 1995 17:40:53 -0400 Received: from math.uwaterloo.ca ([129.97.140.144]) by lotus.uwaterloo.ca with SMTP id <23>; Fri, 27 Oct 1995 17:39:59 -0400 Received: from relay-1.mail.demon.net ([158.152.1.140]) by math.uwaterloo.ca with SMTP id <77655-4>; Fri, 27 Oct 1995 17:39:42 -0400 Received: by relay-1.mail.demon.net id as01393; 27 Oct 95 17:21 GMT Received: from [158.152.1.72] by relay-1.mail.demon.net id ac05492; 27 Oct 95 9:35 GMT Received: from relay-1.mail.demon.net by relay-3.mail.demon.net id aa12543; 27 Oct 95 9:27 GMT Received: from bagpuss.argonaut.com by argonaut.com with smtp (Smail3.1.28.1 #5) id m0t8l2E-0003hZC; Fri, 27 Oct 95 10:25 BST Received: from BAGPUSS/MAILQ by bagpuss.argonaut.com (Mercury 1.21); 27 Oct 95 09:27:50 +0 Received: from MAILQ by BAGPUSS (Mercury 1.21); 27 Oct 95 09:27:25 +0 From: Tangerine To Hilt Organization: Argonaut Software Ltd To: sgroup@lotus.uwaterloo.ca Date: Fri, 27 Oct 1995 05:27:23 -0400 Subject: Re: sgroup Lots of questions Priority: normal X-mailer: Pegasus Mail for Windows (v2.01) Message-ID: <277C7BB4447@bagpuss.argonaut.com> Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO ColinWebber@eworld.com once said : * * 3. I have seen system upgrades posted on your archive. How do I transfer * * them to the S760 from my Mac? They usually need to be unbinhexed then the image can be written to a floppy disk using Dart. I also have a question. Are there any utils that read samples from a Roland S7xx series Floppy disk and save them as either AIFF or WAV or any usefull computer format ? I have about 500 samples I need to transfer and I don't fancy using Samplevision. Another thing, can anyone tell me the speed difference between midi sample transfer and SCSI sample transfer ? I am wondering if its worth installing a SCSI card in my PC. justin@argonaut.com ................... : london.uk : :.................: - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From math.uwaterloo.ca!lotus.uwaterloo.ca!owner-sgroup Fri Oct 27 18:26:33 1995 Received: from math.uwaterloo.ca ([129.97.140.144]) by watdragon.uwaterloo.ca with SMTP id <88198-2>; Fri, 27 Oct 1995 18:26:21 -0400 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by math.uwaterloo.ca with SMTP id <77687-1>; Fri, 27 Oct 1995 18:26:17 -0400 Received: by lotus.uwaterloo.ca id <39>; Fri, 27 Oct 1995 18:17:36 -0400 Received: from light.lightlink.com ([205.232.34.1]) by lotus.uwaterloo.ca with SMTP id <23>; Fri, 27 Oct 1995 18:16:46 -0400 Received: from [205.232.34.110] (port9.lightlink.com [205.232.34.109]) by light.lightlink.com (8.6.12/8.6.12) with SMTP id SAA17692; Fri, 27 Oct 1995 18:10:15 -0400 X-Sender: doug@light.lightlink.com Message-Id: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Fri, 27 Oct 1995 18:10:03 -0400 To: Tangerine To Hilt , sgroup@lotus.uwaterloo.ca From: doug@lightlink.com (Doug Wyatt) Subject: Re: sgroup Lots of questions Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO At 5:27 10/27/95, Tangerine To Hilt wrote: > Another thing, can anyone tell me the speed difference between midi > sample transfer and SCSI sample transfer ? I am wondering if its > worth installing a SCSI card in my PC. MIDI sample dump is no better than 3K/second. Maybe a bit worse (I'm calculating based on the MIDI baud rate, but there's also handshaking between the computer and the sampler after every 120 bytes or so). Also 16 bit sound files are transferred using 24 bits per sample (you have to go 14-bit to have only 16 bits per sample transferred). So a 100K sound file occupies 150K when transferred over MIDI, which will take at least 50 seconds. I haven't measured SCSI transfers, but they are much, much, much faster. That 100K sound file shouldn't take more than 10 seconds at the most, if even that. Doug --- Doug Wyatt programmer, Opcode Systems Inc. doug@opcode.com http://www.lightlink.com/doug "It is a miracle that curiosity survives formal education." - Albert Einstein - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From math.uwaterloo.ca!lotus.uwaterloo.ca!owner-sgroup Sat Oct 28 14:25:33 1995 Received: from math.uwaterloo.ca ([129.97.140.144]) by watdragon.uwaterloo.ca with SMTP id <88188-2>; Sat, 28 Oct 1995 14:25:26 -0400 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by math.uwaterloo.ca with SMTP id <77266-4>; Sat, 28 Oct 1995 14:25:22 -0400 Received: by lotus.uwaterloo.ca id <67>; Sat, 28 Oct 1995 14:08:57 -0400 Received: from fullfeed.msn.fullfeed.com ([199.184.182.42]) by lotus.uwaterloo.ca with SMTP id <23>; Sat, 28 Oct 1995 14:07:51 -0400 Received: from jimw@fullfeed.com by fullfeed.msn.fullfeed.com (8.6.9/FF-1.1) id NAA12308; Sat, 28 Oct 1995 13:07:23 -0500 Date: Sat, 28 Oct 1995 14:07:23 -0400 Message-Id: <199510281807.NAA12308@fullfeed.msn.fullfeed.com> X-Sender: jimw@pop.fullfeed.com (Unverified) X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sgroup@lotus.uwaterloo.ca From: jimw@msn.fullfeed.com (Jim Wohlgemuth) Subject: sgroup how to upload..? Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Whats the proper procedure for uploading to the incoming directory at the FTP site? I have the S760 v2.2 in .sdk format in a zip file ready to go. Jim Wohlgemuth Alltron Vintage Disks http://www.msn.fullfeed.com/planetz pardeeville.wisconsin.usa tel: 608-429-2355 - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Sun Oct 29 20:17:40 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88188-2>; Sun, 29 Oct 1995 20:17:34 -0500 Received: by lotus.uwaterloo.ca id <136>; Sun, 29 Oct 1995 20:04:08 -0500 Received: from dove.mtx.net.au ([203.15.24.1]) by lotus.uwaterloo.ca with SMTP id <23>; Sat, 28 Oct 1995 21:08:24 -0400 Received: from [203.15.30.9] (ppp9.mtx.net.au [203.15.30.9]) by dove.mtx.net.au (8.6.10/8.6.9) with SMTP id LAA17931 for ; Sun, 29 Oct 1995 11:38:02 +1030 Date: Sat, 28 Oct 1995 21:08:02 -0400 Message-Id: <199510290108.LAA17931@dove.mtx.net.au> Subject: sgroup Korg 01/W samples? From: Myles Wakeham To: Mime-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hi. I am trying to work with another writer who has a Korg 01/W and would like to be able to mimick his setup on my S760. I can't afford to buy a duplicate of his rig, so I am looking to find any samples of Korg 01/W basic instruments that would help us "sync up" on this. If anyone has any advice on doing this sort of thing, I would be greatful for a point in the right direction. Thanks Myles +------- MYLES WAKEHAM, Technologist, Music Producer, Engineer... ---------+ | AUSTRALIA U.S.A. | | P.O. Box 394, 23705 Vanowen Street, #112 | | Prospect SA 5082 West Hills CA 91307 | +------------------------( mylesw@dove.mtx.net.au )------------------------+ - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Sun Oct 29 20:37:17 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88198-1>; Sun, 29 Oct 1995 20:37:12 -0500 Received: by lotus.uwaterloo.ca id <23>; Sun, 29 Oct 1995 20:19:48 -0500 Received: from watdragon.uwaterloo.ca ([129.97.140.24]) by lotus.uwaterloo.ca with SMTP id <16>; Sun, 29 Oct 1995 20:18:44 -0500 Received: by watdragon.uwaterloo.ca id <88188-1>; Sun, 29 Oct 1995 20:12:03 -0500 From: "John M. Sellens" To: jimw@msn.fullfeed.com, sgroup@lotus.uwaterloo.ca Subject: Re: sgroup how to upload..? Message-Id: <95Oct29.201203est.88188-1@watdragon.uwaterloo.ca> Date: Sun, 29 Oct 1995 20:11:59 -0500 Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO | To: sgroup@lotus.uwaterloo.ca | From: jimw@msn.fullfeed.com (Jim Wohlgemuth) | Subject: sgroup how to upload..? | | Whats the proper procedure for uploading to the incoming directory at the | FTP site? You contact me. John jmsellens@watdragon.uwaterloo.ca - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Mon Oct 30 09:57:40 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-2>; Mon, 30 Oct 1995 09:57:35 -0500 Received: by lotus.uwaterloo.ca id <18>; Mon, 30 Oct 1995 09:41:12 -0500 Received: from lili.cyber.ch ([194.148.6.1]) by lotus.uwaterloo.ca with SMTP id <16>; Mon, 30 Oct 1995 09:40:19 -0500 Received: from mprisi.cyber.ch (cpu2.cyber.ch [194.148.6.2]) by lili.cyber.ch (8.6.9/8.6.9) with SMTP id PAA06095 for ; Mon, 30 Oct 1995 15:43:30 +0100 Date: Mon, 30 Oct 1995 09:43:30 -0500 Message-Id: <199510301443.PAA06095@lili.cyber.ch> X-Sender: mprisi@cyber.ch X-Mailer: Windows Eudora Pro Version 2.1.2 Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: sgroup@lotus.uwaterloo.ca From: Marcel-Philippe Prisi Subject: sgroup S770 & SCSI sample dump Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Hi !! Does anyone know wether the S-770 will support SCSI sample dump ?? (and which software to use ?) Is there an update planned for its OS ?? Many thanks ______________________________________________________________________________ +------------------+---------------------------------------------------------+ | Marcel Prisi | CyberNet Telecommunications Roulin & Berney | | | Av. de France 98 CH - 1004 LAUSANNE | | Marketing & | Tel: +41 (0)21 683.01.81 Fax: +41 (0)21 683.01.88 | | Public Relation | | | Manager | Technical Hotline (From Switzerland Only) 157.50.96 | +------------------+---------------------------------------------------------+ | E-Mail:mprisi@cyber.ch | | HTTP://www.cyber.ch/cybernet/french/marcel/marcel.html | | ** PGP signature on request ** | +----------------------------------------------------------------------------+ - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 31 05:44:02 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-3>; Tue, 31 Oct 1995 05:43:55 -0500 Received: by lotus.uwaterloo.ca id <16>; Tue, 31 Oct 1995 05:32:26 -0500 Received: from f15.pix.za ([196.11.62.108]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 31 Oct 1995 05:31:47 -0500 Received: from net-1.pix.za (net-1.pix.za [196.11.62.129]) by f15.pix.za (8.7.1/8.6.9) with SMTP id MAA17270 for ; Tue, 31 Oct 1995 12:31:18 +0200 Message-Id: <199510311031.MAA17270@f15.pix.za> X-Sender: pak05238@pixie.co.za (Unverified) X-Mailer: Windows Eudora Version 1.4.4 Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Date: Tue, 31 Oct 1995 09:43:24 -0500 To: sgroup@lotus.uwaterloo.ca (Roland Samplers) From: Noel.da.Costa@pixie.co.za (Noel da Costa) Subject: sgroup Wget Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Greetings all, I recently downloaded the w30utils package from the FTP site - a very useful set of programs for a w-30phile like me. Unfortunatley I'm having trouble with one of it's components and I was wondering if anyone has any ideas or solutions. Wget.exe is supposed to convert w-30 tones into .wav files. I have two problems with it. One my version only converts 30khz samples and not 15khz samples. I'm told that all one needs to do is recompile the make file in VC++ with the keyword [USE8BIT] being #defined, but I don't have VC++ - does anyone have a version out there? Secondly, it seems to convert the files to wav files but none of these files will play on my driver - normal wav files (from windows and downloads) work just fine though. Has anyone else experienced this? Thanks. Adios, Noel =20 =20 /!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!\ /| Noel.da.Costa@pixie.co.za |"Be carefull where you aim, |\ =20 || Tel: +27 (11) 726-1733 | Because where you aim you || |/ Fax: +27 (11) 726-1772 | just might hit." \| /| Johannesburg, South Africa | |\ ||_____________________________|_______U2=B0"Dirty Day"________|| =20 |/-----------------------------------------------------------\| /_____________________________________________________________\ - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Fri Oct 27 10:44:17 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88198-3>; Fri, 27 Oct 1995 10:44:08 -0400 Received: by lotus.uwaterloo.ca id <24>; Fri, 27 Oct 1995 10:29:40 -0400 Received: from fullfeed.msn.fullfeed.com ([199.184.182.42]) by lotus.uwaterloo.ca with SMTP id <15>; Fri, 27 Oct 1995 10:28:47 -0400 Received: from [199.184.183.88] by fullfeed.msn.fullfeed.com (8.6.9/FF-1.1) id JAA08376; Fri, 27 Oct 1995 09:28:20 -0500 Message-Id: <199510271428.JAA08376@fullfeed.msn.fullfeed.com> X-Sender: jimw@pop.fullfeed.com (Unverified) Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Date: Fri, 27 Oct 1995 11:49:37 -0400 To: sgroup@lotus.uwaterloo.ca From: jimw@msn.fullfeed.com (Jim Wohlgemuth) Subject: sgroup S-760 sys 2,2 rel notes.. complete Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO Here it is.. sorry about the line feeds, its something else to learn how to strip. ******SCSI Transfers with S-760 System Version 2.20****** The S-760 Digital Sampler system has been enhanced to allow transfers of sample data directly from RAM via SCSI. This utility requires software on a computer to initiate the transfer. You will need to use a MIDI interface connected to MIDI In and Out of the S-760 for dumps of the samples to and from the computer. Basic SCSI Rules Because SCSI devices and initiators have many variables, your particular SCS= I setup may vary.However, there some basic rules to SCSI. 1. SCSI devices should be daisy chained to one another with a separate I= D assigned to each device. 2. The SCSI Chain must have termination on both ends of the chain. Termination can be provided either by external terminators or internally on the device. It is important that the devices in the middle of the chain be unterminated otherwise you may experience freezing of the sampler and/or computer while scanning, loading or saving operations. 3. There should be termination power supplied by the storage device. Normally there should 5 volts supplied from the device to the SCSI line. 4. Be careful never to unplug SCSI cables from your computer or S-760 while they are on, otherwise you may damage the S-760, computer or hard drive. Setting up for SCSI Transfers Computer This kind of setup has both the computer and the S-760 as initiators on the SCSI chain. Most computers such as Macintoshes are always hard set to SCSI I= D 7, which will be a problem if your sampler or storage device is also set to the same ID. S-760 Normally the S-760 is set from the factory to SCSI ID 7, which may conflict with your computer. You can change the self ID for the S-760 in the System mode under SCSI parameters. LCD + Front Panel (Go to CRT+Mouse instructions if you are using mouse with S-760 video display) 1. Press the Mode button. The Mode Menu will be displaye= d. 2. Move the cursor to 6: System and press the S1/Dec button. You will go to one of the System Mode pages 3. Push the Value/Menu button. The System Menu will appe= ar. 4. Move the cursor to 2: SCSI and press S1. The System SCSI page will appear. 5. Highlight the S-760 Self SCSI ID and set it to SCSI ID not being used by your computer or SCSI devices. CRT + Mouse (Go to LCD + Front Panel instructions if you are using the front panel) 1. Click on System at the top of the screen. The System Menu will be displayed. 2. Click on SCSI and the System SCSI page will appear. 3. Highlight the S-760 Self SCSI ID with your mouse. Select a SCSI ID not being used by your computer or SCSI devices. Be sure to save the System Parameters after making this change, otherwise th= e S-760 will go back to its previous ID after rebooting. If the S-760 was set = to ID 7 be sure to restart the S-760 so that its ID will change. LCD + Front Panel (Go to CRT+Mouse instructions if you are using mouse with S-760 video display) 1. Press the Mode button. The Mode Menu will be displaye= d. 2. Move the cursor to 6: System and press the S1/Dec button. You will go to one of the System Mode pages 3. Push the Value/Menu button. The System Menu will appe= ar. 4. Move the cursor to highlight 5: LD/SV SysPRM and press S1. The System LD/SV SysPRM page will appear. 5. Press the F3 button to update the S-760=EDs system. =ECNow working=EE followed by =ECComplete=EE should appear at the bottom of the screen indicating that you have updated the system parameters CRT + Mouse (Go to LCD + Front Panel instructions if you are using the front panel) 1. Click on System at the top of the screen. The System Menu will be displayed. 2. Click on LD/SV SysPRM and the System LD/SV System Parameter page will appear. 3. If you have just changed your SCSI ID =ECSysPRM are Edited=EE shou= ld appear on the screen. 4. Click on SavePRM at the bottom of the screen. =ECNow working=EE followed by =ECComplete=EE should appear at the top of the screen indicating that you have updated the system parameters. SCSI Drives In some case, drives that are in-between the sampler and the computer will cause trouble with direct communcation of the two devices. If you experience any trouble with the computer and the S-760 sending and receiving dumps, remove the drive from the chain and retry the dump. If your drive experiences problems by being between your computer and the S- 760 you may need a SCSI switcher. We recommend a switcher made by Glyph Technologies (800) 335-0345.This switcher intelligently checks the SCSI buss to see if the initiator(s) on a SCSI chain are scanning the line and waits t= o change between hosts to avoid lockups and possible directory corruption of a disk drive when the line is switched. Software Support for SCSI Transfers with the S-760 Recycle! (Macintosh and IBM) Steinberg/Jones (818) 993-4091 The Steinberg/Jones program Recycle! can transmit and receive samples to the S-760 via SCSI. Unlike average sample editing programs Recycle! was made to specifically breakdown phrase samples into individual beats or multiple samples and send them into a sampler for playback of the samples in correct time. Recycle! will create Patches for the samples that it sends to the S-76= 0. To work with Recycle! you must have OMS, Opcode MIDI System software install= ed into your Macintosh=EDs system (this comes with the Recycle! program). Make = sure that you configure your OMS setup with the S-760=EDs specific MIDI device ID= , otherwise Recycle! can not recognize the S-760 when it is launched on the Macintosh. Both the MIDI in and MIDI out of the S-760 must be connected to t= he MIDI interface. Transfer Station (Macintosh) Interval Music Systems (310) 478-3956 Transfer Station is designed to transfer samples for various digital sampler= s through the Macintosh. The S-760 is supported for sample transfers via SCSI. You must have the S-760 connected with its MIDI In and Out to your computers MIDI interface to use the this program. This program does not require OMS, i= t can work with other MIDI drivers or Transfer Station=EDs own MIDI driver. SoundForge (IBM) (800) 577-6642 SoundForge is a professional quality sample editing program for Windows. Thi= s program will support the S-760 for SCSI dumps in the near future. Currently Sound Forge will support our 700 Series Digital Samplers with MIDI / SDS, Sample Dump Standard types of transfers. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca From lotus.uwaterloo.ca!owner-sgroup Tue Oct 31 22:12:41 1995 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88199-3>; Tue, 31 Oct 1995 22:12:34 -0500 Received: by lotus.uwaterloo.ca id <20>; Tue, 31 Oct 1995 22:02:48 -0500 Received: from huey.disney.com ([204.128.192.10]) by lotus.uwaterloo.ca with SMTP id <15>; Tue, 31 Oct 1995 22:01:42 -0500 Received: from cc.wdi.disney.com by huey.disney.com (SMI-8.6/SMI-SVR4) id TAA07793; Tue, 31 Oct 1995 19:01:12 -0800 From: Steve_Petitt@cc.wdi.disney.com Received: from cc:Mail by cc.wdi.disney.com id AA815184132; Tue, 31 Oct 95 14:52:49 pst Date: Tue, 31 Oct 1995 17:52:49 -0500 Message-Id: <9509318151.AA815184132@cc.wdi.disney.com> To: sgroup@lotus.uwaterloo.ca Subject: sgroup Attention s-50 owners Sender: owner-sgroup@lotus.uwaterloo.ca Precedence: bulk Status: RO I still have the DT-100 digitizer tablets for the s-50 for sale. These are brand new in the box, and are $30.00 plus shipping. The DT-100 will allow you to draw waveform and envelope curves with a stylus pen. E-mail if interested. - Sent by the sgroup mailing list on lotus.uwaterloo.ca For subscription information, send mail to majordomo@lotus.uwaterloo.ca