From lotus.uwaterloo.ca!sgroup-owner Fri Nov 4 06:12:40 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-2>; Fri, 4 Nov 1994 06:12:33 -0500 Received: from netmail2.microsoft.com ([131.107.1.13]) by lotus.uwaterloo.ca with SMTP id <138>; Fri, 4 Nov 1994 06:00:45 -0500 Received: by netmail2.microsoft.com (5.65/25-eef) id AA01446; Fri, 4 Nov 94 03:02:00 -0800 Message-Id: <9411041102.AA01446@netmail2.microsoft.com> Received: by netmail2 using fxenixd 1.0 Fri, 04 Nov 94 03:02:00 PST X-Msmail-Message-Id: 4EA9C8B1 X-Msmail-Conversation-Id: 4EA9C8B1 From: Peter Fitzpatrick To: sgroup@lotus.uwaterloo.ca Date: Fri, 4 Nov 1994 13:39:03 -0500 Subject: W30 SCSI. So far so good X-Mscontent-Transfer-Encoding: Quoted-Printable Status: R Hi : for anyone who's interested : here's my progress so far on getting my W30 scsi'd : 1. got the chip ordered from Roland US. Cost $74 incl. shipping (US). I = now have to get it forwarded to me here in Ireland 2. got the manual(s) (they described it as a set of books, probably = tech. notes etc) on order from Roland UK. Cost stg=A325 (about $40). Better be worth it ! 3. Jim Norman (Roland US) has said he'll try to put an image of the = KW30 scsi system disk (ver 1.06) onto the Roland Library on Compuserve. = I've asked if it would be ok to post this on the ftp site at = uwaterloo.ca ( John Sellens : are you interested in getting this ???) Took a look inside the W30 last night. After I finally removed all the = necessary screws I noticed that the floppy drive looked like a regular = pc type (mac maybe) manufactured by Chinon. Sure enough there's an empty chip socket for the SCSI chip. Does anyone think it's possible that the SCSI chip itself is available = "off the shelf" ??? regards, Peter Fitzpatrick (not speaking for Microsoft, the opinions expressed above are my own) From lotus.uwaterloo.ca!sgroup-owner Fri Nov 4 11:01:31 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88181-2>; Fri, 4 Nov 1994 11:01:25 -0500 Received: from pipeline.com ([198.80.32.3]) by lotus.uwaterloo.ca with SMTP id <166>; Fri, 4 Nov 1994 10:52:45 -0500 Received: from pipe1.pipeline.com (pipe1 [198.80.32.41]) by pipeline.com (8.6.9/8.6.9) with ESMTP id KAA17946 for ; Fri, 4 Nov 1994 10:52:08 -0500 From: Federico Chieli Received: (fex@localhost) by pipe1.pipeline.com (8.6.9/8.6.9) id KAA06686; Fri, 4 Nov 1994 10:52:07 -0500 Date: Fri, 4 Nov 1994 10:52:07 -0500 Message-Id: <199411041552.KAA06686@pipe1.pipeline.com> To: sgroup@lotus.uwaterloo.ca Subject: Some problems with S-files Status: R Hi to everybody I joined your list 2 days ago Recently I downloaded SMAC from FTP site lotus.UWaterloo.ca The program is great but a Tone_2_SAM feature is missing from the package, so I'am unable to stores individual tones back to the disk image. Where else can i find this program? I' m running a Mac Quadra 650 and using a Roland S550. Also when i tried to download some sample from the libraries my transmission reques allways failed. Does anybody knows why? P.S. I'm downloading stuff from the Internet every day, so it's not a problem with my ftp software. I'm having this problem only at lotus.uwaterloo.ca From lotus.uwaterloo.ca!microsoft.com!peterfit Sat Nov 5 22:41:46 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88182-3>; Sat, 5 Nov 1994 22:41:40 -0500 Received: from netmail2.microsoft.com ([131.107.1.13]) by lotus.uwaterloo.ca with SMTP id <185>; Sat, 5 Nov 1994 22:27:39 -0500 Received: by netmail2.microsoft.com (5.65/25-eef) id AA19398; Sat, 5 Nov 94 19:28:55 -0800 Message-Id: <9411060328.AA19398@netmail2.microsoft.com> Received: by netmail2 using fxenixd 1.0 Sat, 05 Nov 94 19:28:55 PST X-Msmail-Message-Id: E5316392 X-Msmail-Conversation-Id: E5316392 From: Peter Fitzpatrick To: sgroup-owner@lotus.uwaterloo.ca, sgroup@lotus.uwaterloo.ca Date: Sun, 6 Nov 1994 02:22:50 -0500 Subject: RE: WTB : W30 SCSI DRIVE Status: R Got two drives today, thanks for the info and help. :-) ---------- From: Peter Fitzpatrick To: Subject: WTB : W30 SCSI DRIVE Date: 30 October 1994 04:36 Wanted : W30 compatible SCSI hard drive. If my information is correct I should try to get either a 40 or 80 meg sony mechanism drive. But am willing to try any compatible drive. can anyone tell me : will my 44/88 syquest work with the SCSI upgrade ? (I'm still waiting on the parts for my upgrade to arrive) cheers, Peter From lotus.uwaterloo.ca!sgroup-owner Mon Nov 7 02:17:22 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88185-2>; Mon, 7 Nov 1994 02:17:14 -0500 Received: from pipeline.com ([198.80.32.3]) by lotus.uwaterloo.ca with SMTP id <196>; Mon, 7 Nov 1994 02:02:45 -0500 Received: from pipe2.pipeline.com (pipe2 [198.80.32.42]) by pipeline.com (8.6.9/8.6.9) with ESMTP id CAA01898 for ; Mon, 7 Nov 1994 02:01:57 -0500 From: Federico Chieli Received: (fex@localhost) by pipe2.pipeline.com (8.6.9/8.6.9) id CAA13090; Mon, 7 Nov 1994 02:01:57 -0500 Date: Mon, 7 Nov 1994 02:01:57 -0500 Message-Id: <199411070701.CAA13090@pipe2.pipeline.com> To: sgroup@lotus.uwaterloo.ca Subject: S550 Libraries Status: R Did anybody ever succeded in downloading the s550 sound libraries at lotus.uwaterloo.ca? I can download the utilities but every time i try to download an S-Disk image (rsb-5501 for example) i get "your request has failed" without any further info. Can anybody help me? From lotus.uwaterloo.ca!sgroup-owner Mon Nov 7 08:27:03 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88167-3>; Mon, 7 Nov 1994 08:26:56 -0500 Received: from netmail2.microsoft.com ([131.107.1.13]) by lotus.uwaterloo.ca with SMTP id <138>; Mon, 7 Nov 1994 08:11:41 -0500 Received: by netmail2.microsoft.com (5.65/25-eef) id AA04401; Mon, 7 Nov 94 05:12:51 -0800 Message-Id: <9411071312.AA04401@netmail2.microsoft.com> Received: by netmail2 using fxenixd 1.0 Mon, 07 Nov 94 05:12:50 PST X-Msmail-Message-Id: 03D478D9 X-Msmail-Conversation-Id: 03D478D9 From: Peter Fitzpatrick To: sgroup@lotus.uwaterloo.ca Date: Sun, 6 Nov 1994 15:10:24 -0500 Subject: W30 SCSI Chip Status: R Ok, received my SCSI chip today (now all I need is the OS....still waiting...) fyi the numbers printed on it are : F Japan MB89352P 8905 E27 the "F" before the word "Japan" looks like a logo. Does this mean anything to anyone ? Roland must surely have used an "off-the-shelf" chip for the SCSI communications ? regrds -Peter From lotus.uwaterloo.ca!sgroup-owner Mon Nov 7 09:03:47 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88167-2>; Mon, 7 Nov 1994 09:03:34 -0500 Received: from UConnVM.UConn.Edu ([137.99.26.3]) by lotus.uwaterloo.ca with SMTP id <197>; Mon, 7 Nov 1994 08:50:05 -0500 Received: from morsec.eeb.uconn.edu by UConnVM.UConn.Edu (IBM VM SMTP V2R2) with TCP; Mon, 07 Nov 94 08:50:16 EST X-Sender: ebgadm01@uconnvm.uconn.edu (Unverified) Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Date: Mon, 7 Nov 1994 07:52:45 -0500 To: sgroup@lotus.UWaterloo.ca From: EBGADM01@UCONNVM.UCONN.EDU (Clinton Morse - EEB Greenhouse Manager) Subject: Re: W30 SCSI Chip X-Mailer: Message-Id: <94Nov7.085005est.197@lotus.uwaterloo.ca> Status: R While I do not know the chip you mentioned, I am sure Roland is using an off-the-shelf chip - why reinvent the wheel?. The 'F' probably stands for Fujitsu. The First set of numbers looks like the part number, the second set is probably a batch code. Hope this helps..... ---------------------------------------------- Clinton Morse - Greenhouse Manager Department of Ecology & Evolutionary Biology University of Connecticut, Storrs CT 06269 E-Mail to: ebgadm01@uconnvm.uconn.edu WWW Server: http://florawww.eeb.uconn.edu/ ---------------------------------------------- From lotus.uwaterloo.ca!sgroup-owner Mon Nov 7 12:44:53 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88170-3>; Mon, 7 Nov 1994 12:44:46 -0500 Received: from uni.tho.shl.com ([159.249.98.23]) by lotus.uwaterloo.ca with SMTP id <166>; Mon, 7 Nov 1994 12:29:18 -0500 Received: from muse.tho.shl.com (thowsmus.tho.shl.com) by uni.tho.shl.com (4.1/SMI-4.1) id AA21737; Mon, 7 Nov 94 09:26:36 PST Received: by muse.tho.shl.com (5.0/SMI-4.1) id AA15580; Mon, 7 Nov 1994 09:26:47 +0800 Date: Sun, 6 Nov 1994 20:26:47 -0500 From: gwhiz@tho.shl.com (Michael G. Williams) Message-Id: <9411071726.AA15580@muse.tho.shl.com> To: sgroup@lotus.uwaterloo.ca, peterfit@microsoft.com Subject: Re: W30 SCSI Chip X-Sun-Charset: US-ASCII Content-Length: 471 Status: R Yes, Fujitsu part numbers are MB... but off the shelf doesn't necessarily mean still in production. Is this W30 an old machine or brand new or? Michael Williams GWHIZ Arts & Sciences Thousand Oaks, CA USA ------------------------- fyi the numbers printed on it are : F Japan MB89352P 8905 E27 the "F" before the word "Japan" looks like a logo. Does this mean anything to anyone ? Roland must surely have used an "off-the-shelf" chip for the SCSI communications ? From lotus.uwaterloo.ca!sgroup-owner Mon Nov 7 12:57:20 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88170-3>; Mon, 7 Nov 1994 12:57:08 -0500 Received: from arcturus.ciril.fr ([192.70.84.69]) by lotus.uwaterloo.ca with SMTP id <199>; Mon, 7 Nov 1994 12:45:42 -0500 Received: from donjuan.mines.u-nancy.fr (mines.u-nancy.fr) by arcturus.ciril.fr with SMTP (1.37.109.11/16.2) id AA246970098; Mon, 7 Nov 1994 18:41:38 +0100 Received: by donjuan.mines.u-nancy.fr (4.1/SMI-4.0) id AA06625; Mon, 7 Nov 94 18:41:49 +0100 From: papadaca@mines.u-nancy.fr (Papadacci Alexandre) Message-Id: <9411071741.AA06625@donjuan.mines.u-nancy.fr> Subject: S750 <- SCSI -> Computer (Falcon for example) To: sgroup@lotus.uwaterloo.ca Date: Mon, 7 Nov 1994 12:41:49 -0500 X-Mailer: ELM [version 2.4 PL21] Content-Type: text Content-Length: 1110 Status: R \|/ @ @ ---------------------------------------oOO-(_)-OOo----------------------- Hi !! I am really interested in developping a kind of little Avalon (with signal processing, auto-looping and so on) on a Atari Falcon in order to work with my S750... The problem is that FFTs are fast but Sample Dump Standard is really too slow... So I really would like to make sample dumps thru SCSI (~ 4 Mo/sec not bad) Does anyone know if that is (quite easily) possible ?? Can you give me a piece of advice ??? Subsidiary question: Does anyone know why it is impossible to create directories and subdirectories on my S750's hard disk ? My OS version is 2.15... Is it possible with a more recent version of the OS ??? Alexandre Ecole des Mines Nancy, France papadaca@mines.u-nancy.fr From lotus.uwaterloo.ca!sgroup-owner Mon Nov 7 16:54:47 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88186-2>; Mon, 7 Nov 1994 16:54:43 -0500 Received: from netmail2.microsoft.com ([131.107.1.13]) by lotus.uwaterloo.ca with SMTP id <210>; Mon, 7 Nov 1994 16:47:07 -0500 Received: by netmail2.microsoft.com (5.65/25-eef) id AA12229; Mon, 7 Nov 94 13:48:11 -0800 Message-Id: <9411072148.AA12229@netmail2.microsoft.com> Received: by netmail2 using fxenixd 1.0 Mon, 07 Nov 94 13:48:11 PST X-Msmail-Message-Id: 7BCB972C X-Msmail-Conversation-Id: 7BCB972C From: Peter Fitzpatrick To: gwhiz@tho.shl.com, sgroup@lotus.uwaterloo.ca Date: Sun, 6 Nov 1994 22:34:48 -0500 Subject: Re: W30 SCSI Chip Status: R Well, the W30 was discontinued a couple of years ago as well as the SCSI upgrade kit. So , the chip was used throughout the lifetime of the W30's production (.....safe to assume ???) ---------- From: Michael G. Williams To: ; Peter Fitzpatrick Subject: Re: W30 SCSI Chip Date: 07 November 1994 09:26 Yes, Fujitsu part numbers are MB... but off the shelf doesn't necessarily mean still in production. Is this W30 an old machine or brand new or? Michael Williams GWHIZ Arts & Sciences Thousand Oaks, CA USA ------------------------- fyi the numbers printed on it are : F Japan MB89352P 8905 E27 the "F" before the word "Japan" looks like a logo. Does this mean anything to anyone ? Roland must surely have used an "off-the-shelf" chip for the SCSI communications ? From lotus.uwaterloo.ca!sgroup-owner Mon Nov 7 17:56:18 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88170-3>; Mon, 7 Nov 1994 17:56:13 -0500 Received: from metro.ucc.su.OZ.AU ([129.78.64.2]) by lotus.uwaterloo.ca with SMTP id <198>; Mon, 7 Nov 1994 17:48:16 -0500 Received: from mama.research.canon.oz.au by metro.ucc.su.OZ.AU with MHSnet id AA16487 (5.65c/IDA-1.4.4 for sgroup@lotus.UWaterloo.ca); Tue, 8 Nov 1994 09:24:37 +1100 Received: from john.research.canon.oz.au by mama.research.canon.oz.au with SMTP id AA04733 (5.65c8/IDA-1.5); Tue, 8 Nov 1994 08:44:10 +1100 Received: by john.research.canon.oz.au (4.1/SMI-4.1) id AA14622; Tue, 8 Nov 94 08:44:09 EST Date: Tue, 8 Nov 1994 08:44:09 -0500 From: david@research.canon.oz.au (David White) Message-Id: <9411072144.AA14622@john.research.canon.oz.au> To: EBGADM01@UCONNVM.UCONN.EDU (Clinton Morse - EEB Greenhouse Manager) Cc: sgroup@lotus.UWaterloo.ca Subject: Re: W30 SCSI Chip In-Reply-To: <94Nov7.085005est.197@lotus.uwaterloo.ca> References: <94Nov7.085005est.197@lotus.uwaterloo.ca> Status: RO >>>>> "Clinton" == Clinton Morse writes: Clinton> While I do not know the chip you mentioned, I am sure Roland is using an Clinton> off-the-shelf chip - why reinvent the wheel?. The 'F' probably stands for Clinton> Fujitsu. The First set of numbers looks like the part number, the second Clinton> set is probably a batch code. Hope this helps..... I checked the Fujitsu data book. This is definately a Fujitsu SCSI controller chip. David. David White CAE Systems Administrator | david@research.canon.oz.au Canon Information Systems Research Australia Pty Ltd | Phone +61-2-805-2916 PO Box 313, 1 Thomas Holt Drive, | Fax +61-2-805-2929 NORTH RYDE, NSW, 2113, AUSTRALIA | Mobile +61-15-225-828 From lotus.uwaterloo.ca!sgroup-owner Tue Nov 8 05:58:58 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88185-2>; Tue, 8 Nov 1994 05:58:52 -0500 Received: from netmail2.microsoft.com ([131.107.1.13]) by lotus.uwaterloo.ca with SMTP id <195>; Tue, 8 Nov 1994 05:40:50 -0500 Received: by netmail2.microsoft.com (5.65/25-eef) id AA12459; Tue, 8 Nov 94 02:41:51 -0800 Message-Id: <9411081041.AA12459@netmail2.microsoft.com> Received: by netmail2 using fxenixd 1.0 Tue, 08 Nov 94 02:41:51 PST X-Msmail-Message-Id: 80E5F6FF X-Msmail-Conversation-Id: 80E5F6FF From: Peter Fitzpatrick To: EBGADM01@UCONNVM.UCONN.EDU, sgroup-owner@lotus.uwaterloo.ca Date: Mon, 7 Nov 1994 04:37:25 -0500 Subject: Re: W30 SCSI Chip Cc: sgroup@lotus.UWaterloo.ca Status: R "I checked the Fujitsu data book. This is definately a Fujitsu SCSI controller chip." .....bet it only costs 5% of what I paid Roland for it ;-) -Peter in rainy Ireland... ---------- From: David White To: Clinton Morse - EEB Greenhouse Manager Cc: Subject: Re: W30 SCSI Chip Date: 08 November 1994 08:44 >>>>> "Clinton" == Clinton Morse writes: Clinton> While I do not know the chip you mentioned, I am sure Roland is using an Clinton> off-the-shelf chip - why reinvent the wheel?. The 'F' probably stands for Clinton> Fujitsu. The First set of numbers looks like the part number, the second Clinton> set is probably a batch code. Hope this helps..... I checked the Fujitsu data book. This is definately a Fujitsu SCSI controller chip. David. David White CAE Systems Administrator | david@research.canon.oz.au Canon Information Systems Research Australia Pty Ltd | Phone +61-2-805-2916 PO Box 313, 1 Thomas Holt Drive, | Fax +61-2-805-2929 NORTH RYDE, NSW, 2113, AUSTRALIA | Mobile +61-15-225-828 From math.uwaterloo.ca!lotus.uwaterloo.ca!sgroup-owner Tue Nov 8 22:27:16 1994 Received: from math.uwaterloo.ca ([129.97.140.144]) by watdragon.uwaterloo.ca with SMTP id <88182-1>; Tue, 8 Nov 1994 22:27:04 -0500 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by math.uwaterloo.ca with SMTP id <77546-3>; Tue, 8 Nov 1994 22:26:52 -0500 Received: from relay2.geis.com ([192.77.188.3]) by lotus.uwaterloo.ca with SMTP id <213>; Tue, 8 Nov 1994 22:19:03 -0500 Received: by relay2.geis.com (1.37.109.11/15.6) id AA062911133; Wed, 9 Nov 1994 03:18:53 GMT From: s.petitt@genie.geis.com Message-Id: <199411090318.AA062911133@relay2.geis.com> Date: Tue, 8 Nov 1994 21:40:00 -0500 To: sgroup@lotus.uwaterloo.ca Subject: Need help w/samdisk for Atari X-Genie-Id: 9011837 X-Genie-From: S.PETITT Status: R I'm looking for someone to help me use samdisk(or samatari.ttp)on my ST.I don't have a hard drive and don't really understand how to ex- ecute and use this program.I have some really good samples to share with the group(custom sounds from the Beach Boys,Fleetwood Mac,and others(I bought my s-550 from Christine McVie of F.M.),but I really coul use some help.I'd be willing to phone for live help(cont.U.S.)if you can leave a evening #.Thanks to everyone!s.petitt@genie.geis.com From lotus.uwaterloo.ca!sgroup-owner Wed Nov 9 05:46:25 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88186-2>; Wed, 9 Nov 1994 05:46:17 -0500 Received: from post.demon.co.uk ([158.152.1.72]) by lotus.uwaterloo.ca with SMTP id <214>; Wed, 9 Nov 1994 05:31:59 -0500 Received: from argonaut.demon.co.uk by post.demon.co.uk id aa28556; 9 Nov 94 10:31 GMT Received: from dellboy.argonaut.com by argonaut.com with smtp (Smail3.1.28.1 #5) id m0r5AIf-0000WrC; Wed, 9 Nov 94 10:30 GMT Message-Id: Received: from DELLBOY/MAILQUEUE by dellboy.argonaut.com (Mercury 1.1); Wed, 9 Nov 94 10:38:15 +0 From: Tangerine To The Hilt Organization: Argonaut Ltd. To: sgroup@lotus.uwaterloo.ca Date: Wed, 9 Nov 1994 05:37:40 -0500 Subject: S750/770 series question Priority: normal X-mailer: Pegasus Mail v3.1 (R1a) Status: R I want to know if there is a way of making a PATCH/PARTIAL use the existing name that a SAMPLE has. I know that the NAME window keeps the last input name, but that is not always relevant. Have I blindly missed the USE SAMPLE NAME option or similiar ? Does anyone here know if Roland have any plans to make our samplers OS a bit more friendly ? Is there a planned v3.0 or are they going to only release bug fixes ? I'm not saying our current OS is not friendly, its just looking a bit dated, and having used the S760, I think they could change things round for the better. e.g. The more intelligent user-defined MARK-ing of windows to jump to, not to mention the quantity of them. justin@argonaut.com ........ :london: :..uk..: From lotus.uwaterloo.ca!sgroup-owner Thu Nov 10 18:31:15 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88190-1>; Thu, 10 Nov 1994 18:31:06 -0500 Received: from pipeline.com ([198.80.32.3]) by lotus.uwaterloo.ca with SMTP id <138>; Thu, 10 Nov 1994 18:18:14 -0500 Received: from pipe1.pipeline.com (pipe1 [198.80.32.41]) by pipeline.com (8.6.9/8.6.9) with ESMTP id SAA19932 for ; Thu, 10 Nov 1994 18:17:32 -0500 From: Federico Chieli Received: (fex@localhost) by pipe1.pipeline.com (8.6.9/8.6.9) id SAA29226; Thu, 10 Nov 1994 18:17:31 -0500 Date: Thu, 10 Nov 1994 18:17:31 -0500 Message-Id: <199411102317.SAA29226@pipe1.pipeline.com> To: sgroup@lotus.uwaterloo.ca Subject: Corrupted samples? Status: RO Does anyone knows if the samples in the slap.slib......directory are corrupted? After downloading two of them (RSB-5502_2.z....) and decomressing them with MacCompress, I loaded them with S-Mac in my S-550 and I realized that there were a lot of weird noises added to the sounds. Is the problem in the samples or in MacCompress? From lotus.uwaterloo.ca!sgroup-owner Mon Nov 14 16:29:35 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-1>; Mon, 14 Nov 1994 16:29:25 -0500 Received: from bwh.harvard.edu ([134.174.81.34]) by lotus.uwaterloo.ca with SMTP id <166>; Mon, 14 Nov 1994 16:13:22 -0500 Received: from jpnepi1.BWH.Harvard.EDU (jpnepi1.bwh.harvard.edu [134.174.93.2]) by bwh.harvard.edu (8.6.9/8.6.9) with SMTP id QAA02127 for ; Mon, 14 Nov 1994 16:12:53 -0500 X-Organization: Brigham & Womens Hospital, A Teaching Affiliate of Harvard Medical School Received: by jpnepi1.BWH.Harvard.EDU (4.1/SMI-4.1) id AA20956; Mon, 14 Nov 94 16:12:12 EST Date: Mon, 14 Nov 1994 16:12:12 -0500 From: Charles Anderson Subject: SMAC To: sgroup Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Status: R I uploaded SMAC (the mac roland disk utility) and it works well with Roland S-550 disks but I was not able to get it to read existing disk images in the library at the ftp site. Are the sdisk images greated with the IBM utility the same as those greated with the MAC or is their something I need to do. I have a nice library of stuff for my K2000 and can export these as AIFF or WAV files. Does SMAC yet allow me to convert these (or add these) to roland disk images? Any other MAC users out there? Are there other MAC utilities I should check out? I also have an IBM in my studio so should I consider using sdisk and then using SMAC to make MAC images? Charles anderson@jpnepi1.bwh.harvard.edu From lotus.uwaterloo.ca!sgroup-owner Tue Nov 15 04:00:50 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-3>; Tue, 15 Nov 1994 04:00:48 -0500 Received: from ruunfs.fys.ruu.nl ([131.211.32.68]) by lotus.uwaterloo.ca with SMTP id <187>; Tue, 15 Nov 1994 03:43:57 -0500 Received: from ruunat.fys.ruu.nl by ruunfs.fys.ruu.nl with SMTP id AA01888 (5.67b+/IDA-1.5 for ); Tue, 15 Nov 1994 09:43:45 +0100 Received: by ruunat.fys.ruu.nl id AA29022 (5.67b/IDA-1.5 for sgroup@lotus.uwaterloo.ca); Tue, 15 Nov 1994 09:43:43 +0100 From: Wilfried van Sark Message-Id: <199411150843.AA29022@ruunat.fys.ruu.nl> Subject: W30 sequencing To: sgroup@lotus.uwaterloo.ca (Sample Users Group) Date: Tue, 15 Nov 1994 03:43:43 -0500 X-Mailer: ELM [version 2.4 PL23] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 566 Status: R Hi y'all, I am wondering how to loop the sequencer in the W30. Any ideas? Thanks, -- Bye ==TheWilf== aka Wilfried G.J.H.M. van Sark, (email: vansark@fys.ruu.nl) w w Utrecht Univ., Dept. of Atomic and Interface Physics, w w w P.O. Box 80000, 3508 TA Utrecht, The Netherlands. w w (tel: +31 - 30 533173) (fax: +31 - 30 543165) "Anything CAN be music, but it doesn't BECOME MUSIC until someone WILLS it to be music, and the audience listening to it decides to PERCEIVE IT AS MUSIC" Frank Zappa in "The Real Frank Zappa book" (1989). From lotus.uwaterloo.ca!sgroup-owner Tue Nov 15 10:53:17 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <89348-1>; Tue, 15 Nov 1994 10:53:07 -0500 Received: from netmail2.microsoft.com ([131.107.1.13]) by lotus.uwaterloo.ca with SMTP id <189>; Tue, 15 Nov 1994 10:39:54 -0500 Received: by netmail2.microsoft.com (5.65/25-eef) id AA03049; Tue, 15 Nov 94 08:40:19 -0800 Message-Id: <9411151640.AA03049@netmail2.microsoft.com> Received: by netmail2 using fxenixd 1.0 Tue, 15 Nov 94 08:40:19 PST X-Msmail-Message-Id: 73E32FF6 X-Msmail-Conversation-Id: 73E32FF6 From: Peter Fitzpatrick To: sgroup-owner@lotus.uwaterloo.ca, sgroup@lotus.uwaterloo.ca Date: Tue, 15 Nov 1994 18:07:25 -0500 Subject: RE: W30 sequencing Status: R What do you mean by "looping" ? You can set the sequencer to loop repeatedly over a section while you're recording on a track. Is this what you mean ? -Peter ---------- From: Wilfried van Sark To: Sample Users Group Subject: W30 sequencing Date: 15 November 1994 03:43 Hi y'all, I am wondering how to loop the sequencer in the W30. Any ideas? Thanks, -- Bye ==TheWilf== aka Wilfried G.J.H.M. van Sark, (email: vansark@fys.ruu.nl) w w Utrecht Univ., Dept. of Atomic and Interface Physics, w w w P.O. Box 80000, 3508 TA Utrecht, The Netherlands. w w (tel: +31 - 30 533173) (fax: +31 - 30 543165) "Anything CAN be music, but it doesn't BECOME MUSIC until someone WILLS it to be music, and the audience listening to it decides to PERCEIVE IT AS MUSIC" Frank Zappa in "The Real Frank Zappa book" (1989). From lotus.uwaterloo.ca!sgroup-owner Tue Nov 15 12:06:23 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88173-1>; Tue, 15 Nov 1994 12:06:16 -0500 Received: from post.demon.co.uk ([158.152.1.72]) by lotus.uwaterloo.ca with SMTP id <190>; Tue, 15 Nov 1994 11:55:31 -0500 Received: from argonaut.demon.co.uk by post.demon.co.uk id aa24663; 15 Nov 94 16:48 GMT Received: from dellboy.argonaut.com by argonaut.com with smtp (Smail3.1.28.1 #5) id m0r7Qjc-0000WrC; Tue, 15 Nov 94 16:27 GMT Message-Id: Received: from DELLBOY/MAILQUEUE by dellboy.argonaut.com (Mercury 1.1); Tue, 15 Nov 94 16:33:31 +0 From: Tangerine To The Hilt Organization: Argonaut Ltd. To: sgroup@lotus.uwaterloo.ca Date: Tue, 15 Nov 1994 11:33:08 -0500 Subject: Disk Listing Priority: normal X-mailer: Pegasus Mail v3.1 (R1a) Status: R Is there a PC or MAC util that allows you to read in S750 formatted SCSI disks eg. syquest 44megs, and save a listing of sample/partial/patch/performance/volume ? If not, does anyone have any info on the disk format/fat etc so I can write my own ? justin@argonaut.com ........ :london: :..uk..: From lotus.uwaterloo.ca!sgroup-owner Thu Nov 17 17:31:52 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88168-1>; Thu, 17 Nov 1994 17:31:43 -0500 Received: from bwh.harvard.edu ([134.174.81.34]) by lotus.uwaterloo.ca with SMTP id <159>; Thu, 17 Nov 1994 17:08:27 -0500 Received: from jpnepi1.BWH.Harvard.EDU (jpnepi1.bwh.harvard.edu [134.174.93.2]) by bwh.harvard.edu (8.6.9/8.6.9) with SMTP id RAA28313 for ; Thu, 17 Nov 1994 17:08:03 -0500 X-Organization: Brigham & Womens Hospital, A Teaching Affiliate of Harvard Medical School Received: by jpnepi1.BWH.Harvard.EDU (4.1/SMI-4.1) id AA25626; Thu, 17 Nov 94 17:08:47 EST Date: Thu, 17 Nov 1994 17:08:47 -0500 From: Charles Anderson Subject: Delivery problems with your mail (fwd) To: sgroup Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Status: R I downloaded SMAC (the mac roland disk utility) and it works well with Roland S-550 disks but I was not able to get it to read existing disk images in the library at the ftp site. Are the sdisk images greated with the IBM utility the same as those greated with the MAC or is their something I need to do. Charles anderson@jpnepi1.bwh.harvard.edu From lotus.uwaterloo.ca!sgroup-owner Sat Nov 19 04:59:22 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-1>; Sat, 19 Nov 1994 04:59:19 -0500 Received: from unb.ca ([131.202.3.20]) by lotus.uwaterloo.ca with SMTP id <187>; Sat, 19 Nov 1994 04:38:56 -0500 Received: from jupiter.sun.csd.unb.ca by unb.ca (8.6.9/941012-15:50) id FAA08996; Sat, 19 Nov 1994 05:38:42 -0400 Received: by jupiter.sun.csd.unb.ca (4.1/SMI-4.1-941013-14:25) id AA00599; Sat, 19 Nov 94 05:38:41 AST Date: Sat, 19 Nov 1994 04:38:41 -0500 From: scott dhomas trenn X-Sender: dhomas@jupiter To: SGroup Subject: File Formats. Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Status: R Hello All! I am currently working on some utilities for the Amiga computer. YES it is true, I am finally doing it... I need the S550 disk format information... I used to have it, but I can't find it anywhere. Also, if anyone has the S10 and/or TX16W disk information, I would like to get my hands on that as well. Hopefully, if all has gone well... I will have an Amiga version of SDisk. dhomas. ************************************************************************** ** ** * scott dhomas trenn : Fredericton, NB - CANADA * * scott wilkie Internet: dhomas@unb.ca * ** ** ************************************************************************** From lotus.uwaterloo.ca!sgroup-owner Sat Nov 19 17:29:56 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-1>; Sat, 19 Nov 1994 17:29:48 -0500 Received: from italian.engin.umich.edu ([141.212.64.41]) by lotus.uwaterloo.ca with SMTP id <190>; Sat, 19 Nov 1994 17:14:54 -0500 Received: (jkimble@localhost) by italian.engin.umich.edu (8.6.8/8.6.4) id RAA15563; Sat, 19 Nov 1994 17:14:43 -0500 Date: Sat, 19 Nov 1994 17:14:43 -0500 From: john hamilton kimble Message-Id: <199411192214.RAA15563@italian.engin.umich.edu> To: dhomas@unb.ca, sgroup@lotus.uwaterloo.ca Subject: Re: File Formats. Status: R YEA! YEA! thank you thank you I hope this will work on my dj-70! LjSkD From lotus.uwaterloo.ca!sgroup-owner Fri Nov 25 17:35:13 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88159-3>; Fri, 25 Nov 1994 17:35:08 -0500 Received: from unb.ca ([131.202.3.20]) by lotus.uwaterloo.ca with SMTP id <197>; Fri, 25 Nov 1994 17:22:50 -0500 Received: from jupiter.sun.csd.unb.ca by unb.ca (8.6.9/941012-15:50) id SAA28734; Fri, 25 Nov 1994 18:22:29 -0400 Received: by jupiter.sun.csd.unb.ca (4.1/SMI-4.1-941013-14:25) id AA13134; Fri, 25 Nov 94 18:22:26 AST Date: Fri, 25 Nov 1994 17:22:25 -0500 From: scott dhomas trenn X-Sender: dhomas@jupiter To: Rod Lemcke , SGroup Subject: Attention: AMIGA Users Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Status: R Greetings, Well, as I mentioned previously, I had some success making an Amiga version of SAMDISK / SDISK / etc. I can now officially say (though beta-testing consisted of two disks, sofar), READ and WRITE now works. Original Stats: (first attempt) READ: 279 seconds WRITE: Not working. New Stats: (second attempt) READ: 83.98438 seconds WRITE: 95.08594 seconds WRITEing includes FORMATing and writing data. Verify is not performed yet, but will be soon. So, over the weekend I will be doing some more testing and coding. If you are interested in this software and utilities that I will be writing now that it works... please contact me directly at the below EMail address. I'll be starting a mailing list to keep everyone posted of the status. dhomas. ************************************************************************** ** ** * scott dhomas trenn : Fredericton, NB - CANADA * * scott wilkie Internet: dhomas@unb.ca * ** ** ************************************************************************** From lotus.uwaterloo.ca!sgroup-owner Sat Nov 26 18:28:34 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88170-2>; Sat, 26 Nov 1994 18:28:26 -0500 Received: from netmail2.microsoft.com ([131.107.1.13]) by lotus.uwaterloo.ca with SMTP id <199>; Sat, 26 Nov 1994 18:10:55 -0500 Received: by netmail2.microsoft.com (5.65/25-eef) id AA22194; Sat, 26 Nov 94 15:10:45 -0800 Message-Id: <9411262310.AA22194@netmail2.microsoft.com> Received: by netmail2 using fxenixd 1.0 Sat, 26 Nov 94 15:10:43 PST X-Msmail-Message-Id: F9D7E10A X-Msmail-Conversation-Id: F9D7E10A From: Peter Fitzpatrick To: sgroup@lotus.UWaterloo.ca Date: Sun, 27 Nov 1994 02:03:21 -0500 Subject: W30 Songfile Conversion ? Status: R Any programming guru's out there who reckon they could write a program that would take IBM PC midi files and convert them into a disk image (using SDISK maybe) containing W30 compatible MIDI Songs ? I know a few W30 users who would dearly _love_ such a utility. -Peter From lotus.uwaterloo.ca!sgroup-owner Sun Nov 27 18:05:11 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88172-2>; Sun, 27 Nov 1994 18:05:05 -0500 Received: from xmission.xmission.com ([198.60.22.2]) by lotus.uwaterloo.ca with SMTP id <200>; Sun, 27 Nov 1994 16:16:10 -0500 Received: from xmission.xmission.com (slc23.xmission.com [198.60.22.123]) by xmission.xmission.com (8.6.9/8.6.9) with SMTP id OAA03909 for ; Sun, 27 Nov 1994 14:15:53 -0700 Message-Id: <199411272115.OAA03909@xmission.xmission.com> Sender: From: "The Alchemist" To: sgroup@lotus.uwaterloo.ca Date: Sun, 27 Nov 1994 16:15:44 -0500 Subject: Re: W30 Songfile Conversion ? Priority: normal X-mailer: Pegasus Mail/Windows (v1.22) Status: R > From: Peter Fitzpatrick > To: sgroup@lotus.uwaterloo.ca > Date: Sun, 27 Nov 1994 02:03:21 -0500 > Subject: W30 Songfile Conversion ? > Any programming guru's out there who reckon they could write a program > that would take IBM PC midi files and convert them into a disk image > (using SDISK maybe) containing W30 compatible MIDI Songs ? > > I know a few W30 users who would dearly _love_ such a utility. > > -Peter Great idea... A vice-versa convert (disk image -> .MID format) would be nice as well. =] Anyone, anyone? Beuhler? -- ------------------------------------------------------------------------------- The Alchemist o \o/ _ o o o-o +===+ o +===+ alchemy@xmission.com /|\ | /\ __\o o_| \ / | | /|\ | | Salt Lake City, Utah / \ / \ | \ /) | \\o \| |~~~| Co-"=|~~~| Salt Lake Community College o-o o-o o-o o-o \ o\ |___| / \ |___| From lotus.uwaterloo.ca!sgroup-owner Mon Nov 28 18:06:09 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88167-2>; Mon, 28 Nov 1994 18:05:57 -0500 Received: from walt.disney.com ([139.104.1.2]) by lotus.uwaterloo.ca with SMTP id <197>; Mon, 28 Nov 1994 17:52:55 -0500 Received: from cc.wdi.disney.com by walt.disney.com with SMTP id AA20980 (5.65c/IDA-1.4.3 for sgroup@lotus.uwaterloo.ca); Mon, 28 Nov 1994 14:52:21 -0800 Received: from cc:Mail by cc.wdi.disney.com id AA786063100; Mon, 28 Nov 94 14:51:40 pst Date: Mon, 28 Nov 1994 17:51:40 -0500 From: "Steve D. Petitt" Message-Id: <9410287860.AA786063100@cc.wdi.disney.com> To: sgroup@lotus.uwaterloo.ca Subject: Still need Atari samdisk help please. Status: R I realize that to some of you I'm still in the dark ages,using Atari.However until I can change platforms,I really need help from someone that is,or has, used the Atari version of samdisk.I'm anxious to share my sound library with sgroup.Please e-mail steve_petitt@cc.wdi.disney.com or s.petitt@genie.geis.com From lotus.uwaterloo.ca!sgroup-owner Tue Nov 29 13:31:30 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88167-1>; Tue, 29 Nov 1994 13:31:23 -0500 Received: from mail.st.rim.or.jp ([202.255.181.7]) by lotus.uwaterloo.ca with SMTP id <200>; Tue, 29 Nov 1994 13:19:39 -0500 Received: from [202.255.181.11] (pppd.st.rim.or.jp [202.255.181.11]) by mail.st.rim.or.jp (8.6.9+2.4W/3.3W-rim1.0) with SMTP id DAA18954 for ; Wed, 30 Nov 1994 03:19:06 +0900 Message-Id: <199411291819.DAA18954@mail.st.rim.or.jp> Date: Tue, 29 Nov 1994 13:21:19 -0500 To: sgroup@lotus.uwaterloo.ca From: junenoki@mail.st.rim.or.jp (Jun Enoki) X-Sender: junenoki@mail.st.rim.or.jp (Unverified) Subject: [Q] about recycle MIME-Version: 1.0 Content-Type: text/plain; charset=iso-2022-jp X-Mailer: Eudora-JE(1.3.5-JE10) Status: R Hello, SGROUP members. Does anybody know about "RECYCLE" from Steinberg? It should be a software which supports wave transfer via SCSI between samplers and Macintosh. I think it could be the only software in terms of communicating with samplers, since Alchemy has been discontinued and Sound Designer II does not support sampler network anymore. I got tired of watching *SLOW* moving status bar with MIDI dump. I hope Recycle supports SCSI transfer with S760... Any info's are welcome. Thank you. ------------------------------------------------------------------- Thanks, Jun Enoki junenoki@st.rim.or.jp ------------------------------------------------------------------- From lotus.uwaterloo.ca!sgroup-owner Tue Nov 29 13:59:19 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88167-3>; Tue, 29 Nov 1994 13:59:16 -0500 Received: from taurus.oac.uci.edu ([128.200.80.23]) by lotus.uwaterloo.ca with SMTP id <201>; Tue, 29 Nov 1994 13:52:35 -0500 Received: by taurus.oac.uci.edu id AA28070 (5.65c/IDA-1.4.4 for MIDI Users Group ); Tue, 29 Nov 1994 10:52:16 -0800 Date: Tue, 29 Nov 1994 13:52:15 -0500 From: Stephen Bang Subject: ftp site To: MIDI Users Group Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Status: RO I just tried the ftp site today and came across a strange problem. How come when I do a "dir" it says transfer completed yet nothing shows! When I do a "ls" it shows up but dir is gone (which is frustrating). Sorry to disturb the midi talk...! Steve From lotus.uwaterloo.ca!sgroup-owner Tue Nov 29 17:26:27 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88167-2>; Tue, 29 Nov 1994 17:26:22 -0500 Received: from unb.ca ([131.202.3.20]) by lotus.uwaterloo.ca with SMTP id <202>; Tue, 29 Nov 1994 17:17:47 -0500 Received: from jupiter.sun.csd.unb.ca by unb.ca (8.6.9/941012-15:50) id SAA21765; Tue, 29 Nov 1994 18:17:42 -0400 Received: by jupiter.sun.csd.unb.ca (4.1/SMI-4.1-941013-14:25) id AA24046; Tue, 29 Nov 94 18:17:41 AST Date: Tue, 29 Nov 1994 17:17:40 -0500 From: scott dhomas trenn X-Sender: dhomas@jupiter To: Stephen Bang Cc: MIDI Users Group Subject: Re: ftp site In-Reply-To: Message-Id: Mime-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Status: R On Tue, 29 Nov 1994, Stephen Bang wrote: > I just tried the ftp site today and came across a strange problem. How > come when I do a "dir" it says transfer completed yet nothing shows! When > I do a "ls" it shows up but dir is gone (which is frustrating). Sorry to > disturb the midi talk...! I encountered this problem as well... recently. ************************************************************************** ** ** * scott dhomas trenn : Fredericton, NB - CANADA * * scott wilkie Internet: dhomas@unb.ca * ** ** ************************************************************************** From lotus.uwaterloo.ca!sgroup-owner Tue Nov 29 18:42:50 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88168-2>; Tue, 29 Nov 1994 18:42:38 -0500 Received: from watdragon.uwaterloo.ca ([129.97.140.24]) by lotus.uwaterloo.ca with SMTP id <199>; Tue, 29 Nov 1994 18:32:34 -0500 Received: by watdragon.uwaterloo.ca id <88168-3>; Tue, 29 Nov 1994 18:32:08 -0500 From: "John M. Sellens" To: eauu559@ea.oac.uci.edu, sgroup@lotus.uwaterloo.ca Subject: Re: ftp site Message-Id: <94Nov29.183208est.88168-3@watdragon.uwaterloo.ca> Date: Tue, 29 Nov 1994 18:32:05 -0500 Status: RO | From lotus.uwaterloo.ca!sgroup-owner Tue Nov 29 13:59:19 1994 | From: Stephen Bang | Subject: ftp site | To: MIDI Users Group | Mime-Version: 1.0 | Content-Type: TEXT/PLAIN; charset=US-ASCII | | I just tried the ftp site today and came across a strange problem. How | come when I do a "dir" it says transfer completed yet nothing shows! When | I do a "ls" it shows up but dir is gone (which is frustrating). Sorry to | disturb the midi talk...! | | Steve | | There was a bit of a mix-up recently - it's currently under repair. John jmsellens@watdragon.uwaterloo.ca From lotus.uwaterloo.ca!sgroup-owner Wed Nov 30 16:49:37 1994 Received: from lotus.uwaterloo.ca ([129.97.140.9]) by watdragon.uwaterloo.ca with SMTP id <88168-1>; Wed, 30 Nov 1994 16:49:25 -0500 Received: from pipeline.com ([198.80.32.3]) by lotus.uwaterloo.ca with SMTP id <210>; Wed, 30 Nov 1994 16:31:38 -0500 Received: from pipe2.pipeline.com (pipe2 [198.80.32.42]) by pipeline.com (8.6.9/8.6.9) with ESMTP id QAA08708 for ; Wed, 30 Nov 1994 16:30:33 -0500 From: Rob Gorton Received: (rag@localhost) by pipe2.pipeline.com (8.6.9/8.6.9) id QAA19065; Wed, 30 Nov 1994 16:30:30 -0500 Date: Wed, 30 Nov 1994 16:30:30 -0500 Message-Id: <199411302130.QAA19065@pipe2.pipeline.com> To: sgroup@lotus.uwaterloo.ca Subject: Fender Rhodes sounds Status: R I'm looking for a good Rhodes sound/patch for S-330 or S-550. I have some samples for a DynaCord ADS (lovely sampler too) but would be interested in any native roland sounds that might be out there.